Rational Wave Equation Model for Pile‐Driving Analysis
Publication: Journal of Geotechnical Engineering
Volume 114, Issue 3
Abstract
A one‐dimensional wave equation model for pile‐driving analysis is presented. In this model, the pile is represented by discrete elements, while the soil is represented by a series of springs and dashpots, the coefficients of which are derived using elasto‐dynamic theory. The soil model incorporates the loss of wave energy to the soil through radiation or geometric damping. In addition, the effect of the increase in soil resistance to failure when subjected to rapid loading is taken into account. The capability of the proposed model is demonstrated by comparison with field data of two instrumented piles. The analyses include predictions of set, and driving stresses at various levels of the piles. Comparisons are made with the sets and driving stresses predicted by the Smith (1960) model. From the analyses by the proposed model and load test results, estimations of soil setup for the two piles are also presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bathe, K. J., and Wilson, E. L. (1976). “Numerical methods in finite element analysis.” Prentice‐Hall, Inc., Englewood Cliffs, N.J.
2.
Chow, Y. K. (1981). “Dynamic behavior of piles,” thesis presented to the University of Manchester, at Manchester, U.K. in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
3.
Chow, Y. K., et al. (1988). “Load carrying capacity prediction of driven piles,” Canadian Geotechnical Journal, 25(1).
4.
Coyle, H. M., and Gibson, G. C. (1970). “Empirical damping constants for sands and clays.” J. Soil Mech. and Found. Div., ASCE, 96(SM3), 949–965.
5.
Corte, J. F., and Lepert, P. (1986). “Lateral resistance during driving and dynamic pile testing.” Proc. Third Int. Conf. on Numerical Methods in Offshore Piling, Nantes, France, 19–33.
6.
Dayal, U., and Allen, J. H. (1975). “The effect of penetration rate on the strength of remoulded clay and sand sample.” Canadian Geotechnical Journal, 12(3), 336–348.
7.
Dolwin, J., Leonard, C. L., and Poskitt, T. J. (1979). “A study of two instrumented piles during driving.” Paper No. E2006, Dept. of Civil Engineering, Queen Mary College, University of London, London, U.K.
8.
Egorov, K. E. (1965). “Calculation of bed for foundation with ring footing.” Proc. Sixth Int. Conf. on Soil Mechanics and Foundation Engineering, 2, 41–45.
9.
Forehand, P. W., and Reese, J. L. (1964). “Prediction of pile capacity by the wave equation.” J. Soil Mech. and Found. Div., ASCE, 90(2), 1–25.
10.
Gazetas, G., and Dobry, R. (1984). “Simple radiation damping model for piles and footings.” J. Engrg. Mech., ASCE, 110(6), 937–956.
11.
Heerema, E. P. (1979). “Relationships between wall friction, displacement velocity and horizontal stress in clay and in sand for pile drivability analysis.” Ground Engrg., 12(1), 55–60.
12.
Heerema, E. P. (1981). “Dynamic point resistance in sand and in clay, for pile driveability analysis.” Ground Engrg., 4(6), 30–46.
13.
Heerema, E. P., and de Jong, A. (1979). “An advance wave equation computer program which simulates dynamic pile plugging through a coupled mass‐spring system.” Numer. Methods Offshore Piling, Institution of Civil Engineers, London, U.K., 29–34.
14.
Holloway, D. M., Andibert, J. M. E., and Dover, A. R. (1978). “Recent advances in predicting pile driveability.” Proc. 10th Annual Offshore Technology Conf., OTC 3273, 1915–1924.
15.
Litkouhi, S., and Poskitt, T. J. (1980). “Damping constants for pile driveability calculations.” Geotechnique, 30(1), 77–86.
16.
Lysmer, J., and Richart, F. E. (1966). “Dynamic response of footing to vertical loading.” J. Soil Mech. and Found. Div., ASCE, 2(1), 65–91.
17.
Novak, M., Nogami, T., and Aboul‐Ella, F. (1978). “Dynamic soil reactions for plane strain case.” J. of Engrg. Mech. Div., ASCE, 104(4), 953–959.
18.
Randolph, M. F., and Simons, H. A. (1986). “An improved soil model for one‐dimensional pile driving analysis.” Proceedings, Third International Conference on Numerical Methods in Offshore Piling, Nantes, France, 3–17.
19.
Rausche, F. (1984). “Stress wave measuring in practice.” Lectures, Second International Conference on the Application of Stress‐Wave Theory on Piles, Stockholm, Sweden, 1–32.
20.
Rigden, W. J., et al. (1979). “Developments in piling for offshore structures.” Proceedings of the Second International Conference on the Behaviour of Offshore Structures, London, U.K., II, 279–296.
21.
Simons, H. A. (1985). “A theoretical study of pile driving,” thesis presented to the University of Cambridge, at Cambridge, U.K., in partial fulfillment of the requirement for the degree of Doctor of Philosophy.
22.
Simons, H. A., and Randolph, M. F. (1985). “A new approach to one‐dimensional pile driving analysis.” Proceedings, Fifth International Conference on Numerical Methods in Geomechanics, Nagoya, Japan, 1457–1464.
23.
Smith, E. A. L. (1960). “Pile driving analysis by the wave equation.” J. Soil Mech. and Found. Div., ASCE, 86(4), 35–61.
24.
Smith, I. M. (1982). Programming the finite element method. John Wiley and Sons, Inc., New York, N.Y.
25.
Smith, I. M., and Chow, Y. K. (1982). “Three dimensional analysis of pile drivability.” Proceedings, Second International Conference on Numerical Methods in Offshore Piling, Austin, Tex., 1–20.
26.
Smith, I. M., To, W. P., and Willson, S. M. (1986). “Plugging of pipe piles.” Proceedings, Third International Conference on Numerical Methods in Offshore Piling, Nantes, France, 53–73.
27.
Toolan, F. E., and Fox, D. A. (1977). “Geotechnical planning of piled foundations for offshore platforms.” Proc. Inst. Civ. Engrs., London, U.K., 62, May, Part 1, 221–244.
28.
Wong, K. Y., et al. (1987). “Driveability of piles and the effects of followers.” Geotech. Engrg., Southeast Asian Geotechnical Society, 18(2), Bangkok, Thailand.
29.
Wroth, C. P. (1979). “Correlations of some engineering properties of soils.” Proceedings, Second International Conference on Behaviour of Off‐shore Structures, London, U.K., 121–132.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Mar 1, 1988
Published in print: Mar 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.