Pore Pressure Behavior of ‐Consolidated Clays
Publication: Journal of Geotechnical Engineering
Volume 114, Issue 11
Abstract
It is a common belief that negative incremental pore pressures occur during undrained triaxial compression loading of clays with overconsolidation ratios greater than approximately 4. While this behavior is characteristic of isotropically consolidated clays, a review of data from anisotropically consolidated tests on natural clays suggests that incremental pore pressures actually either remain positive or become only slightly negative at very high overconsolidation ratios. This phenomenon may be attributed in part to the location of the yield surface, which extends above the normally consolidated effective stress failure envelope, which is reflected by a Mohr-Coulomb cohesion intercept on the order of 4 ± 2% of the maximum preconsolidation pressure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andersen, H. K., and Stenhamar, P. (1982). “Static plate load tests on overconsolidated clay.” J. Geotech. Engrg. Div., 108(GT7), 918–934.
2.
D'Appolonia, D., Lambe, T. W., and Poulos, H. G. (1971). “Evaluation of pore pressures beneath an embankment.” J. Soil Mech. and Found. Engrg., ASCE, 97(SM6), 881–897.
3.
Hanzawa, H. (1977). “Field and laboratory behavior of Khor‐Al‐Zubair clay, Iraq.” Soils and Foundations, 17(4), 17–30.
4.
Hanzawa, H., Kishida, T., and Matsuda, E. (1982). “Stability analysis with effective stress method on alluvial marine clay.” Soils and Foundations, 22(3), 32–46.
5.
Hight, D. W., Gens, A., and Jardine, R. J. (1985). “Evaluation of geotechnical parameters from triaxial tests on offshore clay.” Advances in underwater technology and offshore engineering 3: Offshore site investigation, Graham & Trotman, Ltd., London, U.K., 253–268.
6.
Jamiolkowski, M., et al. (1985). “New developments in field and laboratory testing of soils.” Proc., 11th Int. Conf. on Soil Mech., 1, San Francisco, 57–154.
7.
Koutsoftas, D. (1981). “Undrained shear behavior of a marine clay.” Laboratory Shear Strength of Soil, ASTM STP 740, 254–276.
8.
Koutsoftas, D., and Ladd, C. C. (1985). “Design strengths for an offshore clay.” J. Geotech. Engrg., 111(3), 337–355.
9.
Ladd, C. C., et al. (1971). “Consolidated undrained plane strain shear tests on Boston blue clay.” MIT Res. Rept. R71‐13, Research in Earth Physics, 15.
10.
Ladd, C. C., et al. (1977). “Stress deformation and strength characteristics.” Proc., 9th Int. Conf. on Soil Mech., 2, Tokyo, Japan, 421–494.
11.
Lambe, T. W., and Whitman, R. V. (1969). Soil mechanics. SI version, MIT/Wiley & Sons, New York, N.Y., 423–438.
12.
Mayne, P. W. (1988). “Determining OCR in clays from laboratory strength.” J. Geotech. Engrg., 114(1), 76–92.
13.
Mayne, P., and Kulhawy, F. (1982). “‐OCR relationships in soil.” J. Geotech. Engrg., 108(6), 851–872.
14.
Mitachi, T., and Fujiwara, Y. (1987). “Undrained shear behavior of clays undergoing long‐term anisotropic consolidation.” Soils and foundations, 27(4), 45–61.
15.
Mitachi, T., and Kitago, S. (1976). “Change in undrained shear characteristics of clay due to swelling.” Soils and Foundations, 16(1), 45–58.
16.
Nakase, A., Kobayashi, M. (1971). “Change in undrained shear strength of saturated clay due to rebound.” Proc., 4th Asian Regional Conf. on Soil Mech., 1, Bangkok, Thailand, 147–150.
17.
Schofield, A., and Wroth, C. P. (1968). Critical state soil mechanics, Cambridge Univ./McGraw‐Hill, New York, N.Y., 198–206.
18.
Wroth, C. P., and Houlsby, G. (1985). “Soil mechanics‐property characterization and analysis procedures.” Proc. 11th Int. Conf. on Soil Mech., 1, San Francisco, 1–56.
19.
Yudhbir, and Varadarajan, A. (1974). “Undrained behavior of overconsolidated clays during shear.” Soils and Foundations, 14(4), 1–12.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: Nov 1, 1988
Published in print: Nov 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.