Centrifuge Simulations of Stable Tailings Dam
Publication: Journal of Geotechnical Engineering
Volume 110, Issue 3
Abstract
The development of the phreatic surface in a stable tailings dam is investigated by using centrifuge simulation techniques and analytical techniques. The centrifuge simulations, conducted on an 8 m radius machine, use a “modeling‐of‐models” approach to determine the effects of scaling and model construction on the development of the phreatic surface. The analytical techniques are used to predict the location of the steady‐state phreatic surface in the equivalent full‐scale prototype dam and to determine its stability in terms of the conventional factor‐of‐safety. While the analysis indicates that there should be no scaling effect on the steady‐state phreatic surface, the simulations show a rise in the phreatic surface with increased scaling. Numerical predictions of the steady‐state phreatic surface compare well with data taken below 100 g scaling.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al‐Hussaini, M. M., Goodings, D. J., Schofield, A. N., and Townsend, F. C., “Centrifuge Modeling of Coal Waste Embankments,” Journal of the Geotechnical Engineering Division, ASCE, 1981, pp. 481–499.
2.
Bathe, K., “ADINAT, A Finite Element Program for Automatic Dynamic Incremental Nonlinear Analysis of Temperatures,” Report 8248‐5, Massachusetts Institute of Technology, Cambridge, Mass., 1977.
3.
Bathe, K., and Khoshgoftaar, M. R., “Finite Element Free Surface Seepage Analysis without Mesh Iterations,” International Journal of Numerical Analysis Methods in Geomechanics, 1978.
4.
Bishop, A. W., and Morgenstern, N., “Stability Coefficients for Earth Slopes,” Geotechnic, Vol. 10, 1960, pp. 129–150.
5.
Boutrup, E., Computerized Slope Stability Analysis for Indiana Highways, Vols. I and II, Joint Highway Research Project, Engineering Research Station, Purdue Univ., 1977.
6.
Buckey, P. B., and Frentress, A. L., “Applications of Principles of Similitude to Design of Mine Workings,” Transactions, American Institute of Mining and Metallurgical Engineers, Vol. 109, 1934, pp. 25–50.
7.
Casagrande, A., “Seepage Through Dams,” Soil Mechanics, 1925–1940, Boston Society of Civil Engineers, Boston, Mass.
8.
Cargill, K. W., and Ko, H.‐Y., “Centrifuge Modeling of Transient Water Flow,” Journal of the Geotechnical Engineering Division, ASCE, Vol. 109, No. 4, 1983, pp. 536–553.
9.
Chowhury, R. N., Slope Analysis, Elsevier, New York, N.Y., 1978.
10.
Goodings, D. J., “Centrifuge Modelling of Slope Failures,” thesis presented to Cambridge University, at Cambridge, England, in 1979, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
11.
Hamberg, D. J., “Materials Characterization Test Results, Tailings,” Engineering Research Institute, University of New Mexico, Albuquerque, N.M.
12.
Maluskitsky, Y. N., “The Centrifuge Model Testing of Waste‐Heap Embankments,” A. N. Schofield, D. R. Crane, eds., Transactions, Cambridge University Press, Cambridge, 1981.
13.
O'Connor, M. J., and Mitchell, R. J., “An Extension of the Bishop and Morgenstern Slope Stability Charts,” Canadian Geotechnical Journal, Vol. 14, 1977, pp. 144–151.
14.
Siegal, R. A., “Computer Analysis of General Slope Stability Problems,” Joint Highway Research Project, Engineering Experimental Station, Purdue University, 1977.
15.
Sutherland, H. J., and Rechard, R. P., “Physical Modeling of Tailings Dams Using Centrifuge Simulation Techniques,” SAND82‐1191, Sandia National Labs, Albuquerque, N.M., 1982.
16.
Townsend, F. C., Goodings, D. J., Schofield, A. N., and Al‐Hussaini, M. M., “Centrifuge Model Analysis of Coal Waste Embankment Stability,” Final Report, Contract H0282018, Bureau of Mines, U.S. Department of Interior, Washington, D.C., 1980.
17.
Wu, T. H., Soil Mechanics, Allyn and Bacon, Boston, Mass., 1976.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Mar 1, 1984
Published in print: Mar 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.