Energy-Harvesting System-in-Package Microsystem1
Publication: Journal of Energy Engineering
Volume 134, Issue 4
Abstract
As microscale devices, such as wireless microsensors and noninvasive biomedical implants, continue to shrink and incorporate more functions, energy becomes scarce, thereby shortening operation life. Furthermore, the limited volume space available constrains the stored energy available in state-of-the-art microbattery technologies, such as thin-film lithium ion (Li Ion). For long-lasting life, it is, therefore, necessary to replenish continuously the energy consumed by harnessing, storing, and delivering energy from the environment in situ, i.e., in the package, alongside the application electronics. Operation life would ultimately be independent from storage limitations. The proposed self-contained, system-in-package solution is composed of three different energy-harvesting sources (light, vibrations, and thermal gradients) that sustain the system, while a charger stores the harnessed energy into an in-package Li Ion. Since substantially low-power levels are expected, the sensor must minimize energy consumption and the system, therefore, must be power moded into various operational modes to consume power only when necessary. Experimental measurements show how an electrostatic harvester sources nanoscale currents that can supply from typical vibrations and, thus, recover the system consumption within .
Get full access to this article
View all available purchase options and get full access to this article.
References
Amirtharajah, R., and Chandrakasan, A. P. (1998). “Self-powered signal processing using vibration-based power generation.” IEEE J. Solid-State Circuits, 33(5), 687–695.
Bates, J. B., Dudney, N. J., Neudecker, B., Ueda, A., and Evans, C. D. (2000). “Thin-film lithium and lithium-ion batteries.” Solid State Ionics, 135(1–4), 33–45.
Beeby, S. P., Torah, R. N., Tudor, M. J., Glynne-Jones, P., O’Donnell, T., Saha, C. R., and Roy, S. (2007). “A microelectromagnetic generator for vibration energy harvesting.” J. Micromech. Microeng., 17(7), 1257–1265.
Castano, E., Revuelto, E., Martin, M. C., Garcia-Alonso, A., and Gracia, F. J. (1997). “Metallic thin-film thermocouple for thermoelectric microgenerator.” Sens. Actuators, A, 60(1–3), 65–67.
Chen, M., and Rincón-Mora, G. A. (2006). “Accurate, compact, and power-efficient Li-Ion battery charger circuit.” IEEE Trans. Circuits Syst., II: Express Briefs, 53(11), 1180–1184.
Cope, R. C., and Podrazhansky, Y. (1999). “The art of battery charging.” Proc., 14th Annual Battery Conf. on Applications and Advances, IEEE, Piscataway, N.J., 233–235.
DiSalvo, F. J. (1999). “Thermoelectric cooling and power generation.” Science, 285(5428), 703–706.
Ehrlich, G. M. (2002). “Lithium-ion batteries.” Handbook of batteries, B. Linden and T. B. Reddy, eds., Chap. 35, McGraw-Hill, New York, 1–94.
El-Hami, M., Glynne-Jones, P., White, N. M., Hill, M., Beeby, S., James, E., Brown, A. D., and Ross, J. N. (2001). “Design and fabrication of a new vibration-based electromechanical power generator.” Sens. Actuators, A, 92(1–3), 335–342.
Fleurial, J. P., Snyder, G. J., Herman, J. A., Giauque, P. H., Phillips, W. M., Ryan, M. A., Shakkottai, P., Kolawa, E. A., and Nicolet, M. A. (1999). “Thick-film thermoelectric microdevices.” Proc., 18th Int. Conf. on Thermoelectrics, IEEE, Piscataway, N.J., 294–300.
Formenti, J., and Martinez, R. (2004). “Design trade-offs for switch-mode battery chargers.” Proc., Portable Power Design Seminar, Texas Instruments, Dallas, 4.1–4.16.
Harb, J. N., LaFollette, R. M., Selfridge, R. H., and Howell, L. L. (2002). “Microbatteries for self-sustained hybrid micropower supplies.” J. Power Sources, 104(1), 46–51.
Jacquot, A., Chen, G., Scherrer, H., Dauscher, A., and Lenoir, B. (2004). “Modeling of on-membrane thermoelectric power supplies.” Sens. Actuators, A, 116(3), 501–508.
Kasap, S. O. (2001). “Photovoltaic devices.” Optoelectronics and photonics: Principles and practices, Prentice-Hall, Upper Saddle River, N.J., 254–272.
Kulah, H., and Najafi, K. (2004). “An electromagnetic micro power generator for low-frequency environmental vibrations.” Proc., 17th Int. Conf. on Micro Electro Mechanical Systems (MEMS), IEEE, Piscataway, N.J., 237–240.
Lima, F., Ramalho, J. N., Tavares, D., Duarte, J., Albuquerque, C., Marques, T., Geraldes, A., Casimiro, A. P., Renkema, G., Been, J., and Groeneveld, W. (2003). “A novel universal battery charger for NiCd, NiMH, Li-ion, and Li-polymer.” Proc., 29th European Solid-State Circuits Conf., IEEE, Piscataway, N.J., 209–212.
Linden, D. (2002). “Basic concepts.” Handbook of batteries, Chap. 1, B. Linden and T. B. Reddy, eds., McGraw-Hill, New York, 3–18.
Lopez, J., Gonzalez, M., Viera, J. C., and Blanco, C. (2004). “Fast-charge in lithium-ion batteries for portable applications.” Proc., 26th Annual Int. Telecommunications Energy Conf., IEEE, Piscataway, N.J., 19–24.
Meninger, S., Mur-Miranda, J. O., Amirtharajah, R., Chandrakasan, A. P., and Lang, J. H. (2001). “Vibration-to-electric energy conversion.” IEEE Trans. Very Large Scale Integr. (VLSI) Syst., 9(1), 64–76.
Ottman, G. K., Hofmann, H. F., and Lesieutre, G. A. (2003). “Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode.” IEEE Trans. Power Electron., 18(2), 696–703.
Raffaelle, R. P., Underwood, J., Scheiman, D., Cowen, J., Jenkins, P., Hepp, A. F., Harris, J., and Wilt, D. M. (2000). “Integrated solar power systems.” Proc., 28th Photovoltaic Specialists Conf., IEEE, Piscataway, N.J., 1370–1373.
Roundy, S., Steingart, D., Frechette, L., Wright, P., and Rabaey, J. (2004). “Power sources for wireless sensor networks.” Proc., 1st European Wireless Sensor Networks Workshop, Springer, Berlin, 1–17.
Roundy, S., and Wright, P. K. (2004). “A piezoelectric vibration based generator for wireless electronics.” Smart Mater. Struct., 13(5), 1131–1142.
Roundy, S., Wright, P. K., and Pister, K. S. (2002). “Microelectrostatic vibration-to-electricity converters.” Proc., Int. Mechanical Engineering Congress and Expo, ASME, New York, 487–496.
Roundy, S., Wright, P. K., and Rabaey, J. (2003). “A study of low-level vibrations as a power source for wireless sensor nodes.” Comput. Commun., 26(11), 1131–1144.
Rowe, D. M. (1999), “Thermoelectrics, an environmentally friendly source of electrical power.” Renewable Energy, 16(1–4), 1251–1256.
Sodano, H. A., Inman, D. J., and Park, G. (2004a). “A review of power harvesting from vibration using piezoelectric materials.” Shock Vibr. Dig., 36(3), 197–205.
Sodano, H. A., Park, G., Inman, D. J. (2004b). “Estimation of electric charge output for piezoelectric energy harvesting.” Strain, 40(2), 49–58.
Stark, B. H., Mitcheson, P. D., Miao, P., Green, T. C., Yeatman, E. M., and Holmes, A. S. (2006), “Converter circuit design, semiconductor device selection and analysis of parasitics for micropower electrostatic generators.” IEEE Trans. Power Electron., 21(1), 27–37.
Stordeur, M., and Stark, I. (1997). “Low-power thermoelectric generator—Self-sufficient energy supply for microsystems.” Proc., 16th Int. Conf. on Thermoelectrics, IEEE, Piscataway, N.J., 575–577.
Torres, E. O., and Rincón-Mora, G. A. (2006). “Electrostatic energy harvester and Li-Ion charger circuit for microscale applications.” Proc., Midwest Sym. on Circuits and Systems, IEEE, Piscataway, N.J., 65–69.
Wang, W., Jia, F., Huang, Q., and Zhang, J. (2005), “A new type of low-power thermoelectric microgenerator fabricated by nanowire array thermoelectric material.” Microelectron. Eng., 77(3–4), 223–229.
Warneke, B. A., Scott, M. D., Leibowitz, B. S., Zhou, L., Bellew, C. L., Chediak, J. A., Kahn, J. M., Boser, B. E., and Pister, K. S. (2002). “An autonomous solar-powered node for distributed wireless sensor networks.” Proc., IEEE Sensors, IEEE, Piscataway, N.J., 1510–1515.
Whitacre, J., Fleurial, J. P., Mojarradi, M., Johnson, T., Myung, N., Ryan, A., and Neigh, S. (2002). “An integrated power generation and storage system: the power tile.” Proc. Int. Sym. on Micropower and Microdevices, E. J. Brandon, A. Ryan, J. Harb, and R. Ulrich, eds., Electrochemical Society, Pennington, N.J., 203–214.
Williams, C. B., Shearwood, S., Harradine, M. A., Mellow, P. H., Birsch, T. S., and Yates, R. B. (2001). “Development of an electromagnetic micro-generator.” IEE Proc.: Circuits Devices Syst., 148(6), 337–342.
Williams, C. B., and Yates, R. B. (1996). “Analysis of a microelectric generator for microsystems.” Sens. Actuators, A, 52(1–3), 8–11.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 134 • Issue 4 • December 2008
Pages: 121 - 129
Copyright
© 2008 ASCE.
History
Received: Jan 30, 2007
Accepted: Mar 10, 2008
Published online: Dec 1, 2008
Published in print: Dec 2008
Notes
Based on “Long-Lasting, Self-Sustaining, and Energy-Harvesting System-in-Package (SiP) Wireless Micro-Sensor Solution,” presented at the 2005 International Conference on Energy, Environment, and Disasters (INCEED) at Charlotte, NC, USA.
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.