Hydrogen Production by Plasma Electrolysis
Publication: Journal of Energy Engineering
Volume 132, Issue 3
Abstract
Preliminary data from controlled experiments indicate that in plasma electrolysis, metallic electrodes do not have to be immersed in water to produce hydrogen and oxygen as in the case of traditional electrolysis. Instead, the electrodes can interact with water through atmospheric pressure plasmas located between the electrode tips and the water surface. Experiments and spectral analysis of the light emitted by the plasmas as well as mass spectroscopic testing of gases from a region near the negative electrode, clearly indicate that the plasma associated with the negative electrode evolves hydrogen from the water. When a single plasma electrode was used in conjunction with a conventional immersed metal electrode, vigorous bubbling was observed at the immersed electrode. In very broad but fundamental terms, the advantage of this method is that high velocity transport of hydrogen through gas phase plasma-bounding regions (i.e., plasma sheaths) might replace low-speed diffusion through liquid phase that is currently used in conventional electrolysis. This process is likely to increase the rate of generation and collection of hydrogen over those of current electrolysis methods with high potential for integration into fuel cell systems and modular units for augmentation of small-scale power systems for distributed electricity generation.
Get full access to this article
View all available purchase options and get full access to this article.
References
Chen, Z., Yan, Y., Said, S. E. H., and Elnashaie, S. S. E. H. (2003). “Novel circulating fast fluidized-bed membrane reformer for efficient production of hydrogen from steam reforming of methane.” Chem. Eng. Sci., 58, 4335–4349.
Kreysa, G. (1981). “Normalized space velocity—A new figure of merit for waste water electrolysis cells.” Electrochim. Acta, 26, 1693–1694.
Loffler, D. G., Taylor, K., and Mason, D. (2003). “A light hydrocarbon fuel processor producing high-purity hydrogen.” J. Power Sources, 117, 84–91.
Marty, P., and Grouset, D. (2003). “High temperature hybrid steam-reforming for hydrogen generation without catalyst.” J. Power Sources, 118, 66–70.
Mat, M. D. M. D., Aldas, K., and Ilegbusi, O. J. (2004). “A two-phase flow model for hydrogen evolution in an electrochemical cell.” Int. J. Hydrogen Energy, 29, 1015–1023.
Nagai, N., Takeuchi, M., Kimura, T., and Oka, T. (2003). “Existence of optimum space between electrodes on hydrogen production by water electrolysis.” Int. J. Hydrogen Energy, 28, 35–41.
Olthuis, W., Volanschi, A., and Bergveld, P. (1998). “Dynamic surface tension measured with an integrated sensor–actuator using electrolytically generated gas bubbles.” Sens. Actuators B, 49, 126–132.
Quandt, H., and Streicher, R. (1986). “Concept and design of a pilot plant for high temperature electrolysis of water vapor.” Int. J. Hydrogen Energy, 11, 309–315.
Saxena, S. K. (2003). “Hydrogen production by chemically reacting species.” Int. J. Hydrogen Energy, 28, 49–53.
Sekiguchi, H., and Mori, Y. (2003). “Steam plasma reforming using microwave discharge.” Thin Solid Films, 435, 44–48.
Shinnar, R. (2003). “The hydrogen economy, fuel cells and electric cars.” Technol. Soc., 25(4), 455–476.
Weber, M. F., and Dignam, M. J. (1986). “Splitting water with semiconducting photoelectrodes efficiency considerations.” Int. J. Hydrogen Energy, 11, 225–232.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Sep 7, 2005
Accepted: Sep 7, 2005
Published online: Dec 1, 2006
Published in print: Dec 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.