Aspects of Technological Development of Wind Turbines
Publication: Journal of Energy Engineering
Volume 129, Issue 3
Abstract
The wind turbine technology has a unique technical identity and unique demands in terms of the methods used for design. Remarkable advances in wind power design have been achieved due to modern technological developments. Since 1980, advances in aerodynamics, structural dynamics, and “micrometeorology” have contributed to a five percent annual increase in the energy yield of the turbines. Current research techniques are producing stronger, lighter, and more efficient blades for the turbines. The annual energy output per turbine has increased enormously and the weight of turbine and the noise they emit have been halved over the last few years. The deployment of modern wind turbines has resulted in experience in the production and use of wind turbines, which has led to improved turbines and reduced cost of wind-generated electricity. The paper reviews the research and development of technology of wind turbines and its impact on the cost of wind energy systems. Also the important gaps between the theoretical research and practical implementation have been analyzed and the problems associated with this have been discussed. The need and areas for further research and development effort have also been outlined.
Get full access to this article
View all available purchase options and get full access to this article.
References
Dodd, H. M. (1990). “Performance predictions for an intermediate-sized VAWT based on performance of the 34-m VAWT test bed.” Proc., ASME Energy Sources Technology Conf. and Exhibition, January.
Dutta, A. K. (2000). “Future trends for wind electric generators.” Proc., AICTE and ISTE Winter School on Wind Energy Generation and its Commercialization, Maulana Azad College of Technology, Bhopal, India, December 18–30.
Dutta, A. K., Dutta, R. D., Morey, N. P., and Basu, A. (1999). “Modern technological developments in wind power generation.” Proc., National Conf. on Wind Energy Commercialisation, Maulana Azad College of Technology, Bhopal, India, March 5–6, 28–38.
Emanuel, P. (1985). “Motors, generators, transformers and energy.” Prentice-Hall, Eaglewood Cliffs, N.J.
EWEA News (1998). Wind direction, January, 21.
Grol, H. J. V. (1991). “Wind turbine benchmark exercise on mechanical loads—A state of the art report.” Part A and B, ECN-C-91-031, 1.
Hunt, D. V. (1981). Wind power, Van Nostrand Reinhold, New York.
IEEE Int. Conf. on Power Electrical Drives and Energy Systems for Industrial Growth on Wind and Hydro Energy Systems (1996). Tutorials IV-8-11, New Delhi, January, 1996.
Lucas, E. J. et al. (1989). “The EPRI—Utility—USW advanced wind turbine program—program status and plans.” Proc., AWEA Wind Power Conf. San Francisco.
Manjula, M., and Makthal, H. V. (2000). “Wind energy—Environmental friendly electric power generation.” Proc., 16th National Convention of Electrical Engineers, The Institution of Engineers, Jaipur, India, November, 66–77.
Nagrath, I. J., and Kothari, D. P. (1994). Power system engineering, Tata McGraw-Hill, New Delhi, Chap. 1.
“Number of blades on a WTG.” Wind information resources on the net at 〈http://www.afm.dtu.dk/wind/〉
Pedersen, B. M. (1996). “State of the art of aero-elastic codes for wind turbine calculation.” Proc., 28th Meeting Experts, IEA Annex XI, April, 1–214.
Petersen, E. L., Mortensen, N. G., Landberg, L., Hostrup, J., and Frank, H. P.(1998). “Wind power meteorology. Part I: Climate and turbulence. Part II: Siting and models.” Wind Energy, 1, 2–22.
Power line. (2000). “Winds of change—Wind energy promises to be the most cost-effective means of clean power, Wind power in India.” India’s First Monthly Power Magazine, New Delhi, India, January, 4(4), 54–55.
Quarton, D. C.(1998). “The evolution of wind turbine design analysis—A twenty-year progress review.” Wind Energy, 1, 5–24.
Quarton, D. C., Botta, G., Hannah, P., Agyriadis, K., and Ingham, P. (1997). “Wind farms in hostile terrain.” Proc., European Wind Energy Conf., Dublin, October.
Quarton, D. C., Rasmussen, F., Nath, C., and Agyriadis, K. (1996). “Wind turbine design calculations—The state of the art.” Proc., European Union Wind Energy Conf., Gothenberg, May, 10–15.
Renewable Energy World. (1998a). “107 MW of wind power.” James and James (Science Publishers) Ltd., United Kingdom, July, 1(1), 10–13.
Renewable Energy World. (1998b). “Wind energy—A true option for developing countries.” James and James (Science Publishers) Ltd., United Kingdom, November, 1(3), 62–64.
Renewable Energy World. (1999). “Technology update, Wind Power.” James and James (Science Publishers) Ltd., United Kingdom, January, 2(1), 45–49.
Renewable Energy World. (2001). “A turn for the better, Innovative concepts for wind turbines.” James and James (Science Publishers) Ltd., United Kingdom, March–April, 4(2), 42–57.
Swift, A., Hock, S., and Thresher, R. A. (1992). “Wind turbine configuration survey.” Proc., 11th ASME Energy Sources Technology Conf. and Exhibition.
Tangler, J. L., and Somers, D. M. “NREL airfoil families for HAWTs.” NREL/TP-442-7109, National Renewable Energy Laboratory, Golden, Colo.
Ten percent of the world’s electricity consumption from wind energy. Wind information resources on the net at 〈http://www.afm.dtu.dk/wind/〉
Thomas, B. G., and Urquhart, J.(1996). “Wind energy for the 1990’s and beyond.” Energy Convers. Manage., 37(12), 1741–1752.
Thresher, R., Hock, S., Loose, R., and Cadogan, J. (1994). “The National wind technology center.” Proc. Wind Power Conf., Minneapolis, 9–13 May.
Uhlen, K., Foss, B. A., and Gjosaeter, O. B. (1994). “Robust control and analysis of a wind-diesel hybrid power plant.” IEEE Trans. Energy Conv., 9(2).
U.S. Department of Energy (USDOE) (1989). “Wind power.” Solar Energy Research Institute, Spring Field, Va., April, 4.
Walker, J., and Jenkins, N. (1997). “Wind energy technology.” Wiley and Sars, New York, 128.
Watson, D. B., Arrillagd, J., and Densem, T. (1979). “Controlled DC power supply from wind driven self-excited induction machine.” Proc. IEEE, 126(12).
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Aug 13, 2002
Accepted: Jan 13, 2003
Published online: Nov 14, 2003
Published in print: Dec 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.