Leachate and Radon Production from Fly Ash Autoclaved Cellular Concrete
Publication: Journal of Energy Engineering
Volume 123, Issue 2
Abstract
Environmental consequences and potential liabilities of autoclaved cellular concrete (ACC) use were assessed by aqueous leaching of crushed samples for metals and organic solvent extractions of solid ACC for polycyclic aromatic hydrocarbons (PAHs). Also, whole ACC blocks were tested for radon exhalation potential. Results show leachate concentrations were typically 10 times below, and always 100 times below the regulatory threshold of applicable drinking water standards. A Microtox bioassay procedure showed no toxic effects due to leached metals. Organic analysis of solvent extracts indicated no release of hazardous PAHs attributable to the fly ash ingredient of ACC. Measured rates of radon exhalation were too low to cause potentially dangerous buildups in confined air spaces. Fly ash ACC may be characterized as an environmentally “green” construction material based on these findings.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Conner, J. R. (1990). Chemical fixation and solidification of hazardous wastes. Van Nostrand Reinhold, New York, N.Y.
2.
Homziak, J.(1993). “Metal leaching from experimental coal fly-ash oyster cultch.”Bull. Envir. Contamination Toxicolology, 51, 317–324.
3.
Mathey, R. G., and Rossiter, W. J. (1988). “A review of autoclaved aerated concrete products.”NBSIR 87-3670, U.S. Dept. of Commerce, Nat. Bureau of Standards, Nat. Engrg. Lab.—Ctr. for Build. Technol., Washington, D.C.
4.
MICROTOX manuals, volumes 1 and 3. Parts No. 55H550-1/3. (1992). Microbics Corp., Carlsbad, Calif.
5.
Neufeld, R. D., et al. (1996a). “Environmental and physical properties of autoclaved cellular concrete; volume 1: narrative and radon exhalation study.”TR-105821, Proj. RP 9040-1. Electric Power Res. Inst., Palo Alto, Calif.
6.
Neufeld, R. D., et al. (1996b). “Environmental and physical properties of autoclaved cellular concrete; volumes 2 and 3: appendices (utility data).”TR-105821, Proj. RP 9040-1. Electric Power Res. Inst., Palo Alto, Calif.
7.
Standard test method for shake extraction of solid waste with water; D3987. (1994). ASTM, West Conshohocken, Pa.
8.
Stebbing, A. R. D.(1982). “Hormesis—the stimulation of growth by low levels of inhibitors.”Sci. Total Environment, Amsterdam, The Netherlands, 22, 213–234.
9.
Strobel, T. M., et al. (1993). “Utilization potential for duct injection residues.”Proc., 10th Int. Ash Use Symp., EPRI TR-101774, Vol. 2, 57-1–57-13.
10.
Techniques in graphite furnance atomic absorption spectrophotometry, Part No. 0993-8150. (1985). Perkin-Elmer, Norwalk, Conn.
11.
United States Department of Energy. (1991). “Clean coal technology demonstration program.” Assistant Secretary for Fossil Energy, Project Status, Washington, D.C.
12.
United States Environmental Protection Agency (USEPA). (1986). Test methods for evaluating solid waste, volume, IC-laboratory manual, physical/chemical method. SW-846. Washington, D.C.
13.
United States Environmental Protection Agency (USEPA). (1990). “Method 1311—toxicity characteristic leaching procedures.”Fed. Register, 55 FR 11862.
14.
Wolfe, W. E., Wu, T. H., and Beeghly, J. H. (1992). “Laboratory determination of engineering properties of dry FGD by-products.”Proc., 9th Ann. Int. Pittsburgh Coal Conf., 229–234.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Aug 1, 1997
Published in print: Aug 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.