Investigation of the Damage-Dependent Response of Mooring Ropes
Publication: Journal of Engineering Mechanics
Volume 135, Issue 11
Abstract
The focus of this paper is on the development of an analytical damage model for predicting the deterioration of the mechanical properties of polyester (PET) ropes subjected to static tension loading. Experimental data on small PET ropes are used to estimate the evolution of damage using the effective stress concept and the principle of strain equivalence. The proposed damage model relies on an empirically based cumulative scalar damage function, which is founded on the assumption that the strain range experienced by rope elements is the main source of damage under static tension loading conditions. In this particular study, the evolution of the damage function is represented by both power law and polynomial forms. Based on experimental observations, softening behavior is developed by rope elements after reaching their maximum load-carrying capacities. This softening behavior is captured by the damage function through an asymptotic expansion technique (perturbation method). Comparisons between predicted rope responses and experimental data are provided to illustrate the use of the proposed damage model to estimate PET rope response.
Get full access to this article
View all available purchase options and get full access to this article.
References
Banfield, S., and Casey, N. (1998). “Evaluation of fibre rope properties for offshore mooring.” Ocean Eng., 25(10), 861–879.
Bartle, R., and Sherbert, D. (1982). Introduction to real analysis, Wiley, New York.
Beltran, J. F. (2006). “Computational modeling of synthetic-fiber ropes.” Ph.D. dissertation, Univ. of Texas at Austin, Austin, Tex.
Beltran, J. F., Rungamornrat, J., and Williamson, E. B. (2003). “Computational model for the analysis of damaged ropes.” Proc., 13th Int. Offshore and Polar Engineering Conf., ISOPE, Honolulu, 705–710.
Beltran, J. F., and Williamson, E. B. (2004). “Investigation of the damage-dependent response of mooring ropes.” Proc., 14th Int. Offshore and Polar Engineering Conf., ISOPE, Toulon, France.
Beltran, J. F., and Williamson, E. B. (2005). “Degradation of rope properties under increasing monotonic load.” Ocean Eng., 32, 823–844.
Carmeliet, J. (1999). “Optimal estimation of gradient damage parameters from localization phenomena in quasi-brittle materials.” Mech. Cohesive-Frict. Mater., 4, 1–16.
Chaboche, J. L. (1988). “Continuum damage mechanics: Part I—General concepts. Part II—Damage growth, crack initiation and crack growth.” J. Appl. Mech., 55, 59–72.
Costello, G. A. (1990). Theory of wire rope, Springer, New York.
Foster, G. P. (2002). “Advantages of fiber rope over wire rope.” J. Industrial Textile, 32, 67–75.
Geers, M., De Borst, R., and Brekelmans, W. (1996a). “Computing strain fields from discrete displacement fields in 2D-solids.” Int. J. Solids Struct., 33, 4293–4307.
Geers, M., Peijs, T., Brekelmans, W., and De Borst, R. (1996b). “Experimental monitoring of strain localization and failure behaviour of composite materials.” Compos. Sci. Technol., 56, 1283–1290.
Ghoreishi, S. R., Mesager, T., Cartraud, P., and Davies, P. (2004). “Assessment of cable models for synthetic mooring lines.” Proc., 14th Int. Offshore and Polar Engineering Conf., ISOPE, Toulon, France.
Holmes, M. (1995). Introduction to perturbation methods, Springer, New York.
Hooker, J. G. (2000). “Synthetic fibre ropes for ultradeep water moorings in drilling and production applications.” 2nd Offshore and Marine Technology, OMT, Singapore.
Kachanov, L. M. (1986). Introduction to continuum damage mechanics, Kluwer, Dordrecht, The Netherlands.
Karayaka, M., Srinivasan, S., and Wang, S. (1999). “Advanced design methodology for synthetic moorings.” Proc., Offshore Technology Conf., OTC, Houston.
Lagerstrom, P. A. (1988). Matched asymptotic expansions: Ideas and techniques, Springer, New York.
Le Ballégo, C., Dubé, J., Pijaudier-Cabot, G., and Gérard, B. (2003). “Calibration of nonlocal damage model from size effect tests.” Eur. J. Mech. A/Solids, 22, 33–46.
Leech, C. M. (1987). “Theory and numerical methods for the modeling of synthetic ropes.” Commun. Appl. Numer. Methods, 3, 407–713.
Leech, C. M. (2002). “The modeling of friction in polymer fibre ropes.” Int. J. Mech. Sci., 44, 621–643.
Lemaitre, J., and Chaboche, J. L. (1990). Mechanics of solid materials, Cambridge University Press, Cambridge.
Li, D., Miyase, A., Williams, J. G., and Wang, S. S. (2002). “Damage tolerance of synthetic-fiber mooring ropes: Small-scale experiments and analytical evaluation of damaged subropes and elements.” Technical Rep. No. CEAC-TR-03-0101, Univ. of Houston.
Linz, P. (1979). Theoretical numerical analysis: An introduction to advanced techniques, Dover, New York.
Liu, F. (1989). “Static response model of synthetic-fiber lines with internal friction.” Technical Rep. No. TR-2052-OCN, Naval Facilities Engineering Services, Port Hueneme, Calif.
Liu, F. (1995). “Computer modeling of high-strength synthetic lines under static and cyclical loads.” Rep. No. TM 44-89-14, Naval Civil Engineering Laboratory, Port Hueneme, Calif.
Lo, K. H., Xu, H., and Skogsberg, L. A. (1999). “Polyester rope mooring design considerations.” Proc., Int. Offshore and Polar Engineering Conf., Brest, France.
Logan, J. D. (1997). Applied mathematics, Wiley, New York.
Mandell, J. F. (1987). “Modeling of marine rope fatigue behavior.” Text. Res. J., 57(6), 318–330.
Najar, J. (1987). Continuum damage mechanics. Theory and applications, Springer, New York.
Nayfeh, A. H. (1973). Introduction to perturbation techniques, Wiley, New York.
Reusch, F., and Estrin, Y. (1998). “FE-analysis of mechanical response of simple structures with random nonuniformity of material properties.” Comput. Mater. Sci., 11(4), 294–308.
Rungamornrat, J., Beltran, J. F., and Williamson, E. B. (2002). “Computational model for synthetic-fiber rope response.” Proc., 15th Eng. Mechanics Conf., ASCE, New York.
Seo, M. H., Backer, S., and Mandell, J. F. (1990). “Modeling of synthetic fiber ropes deterioration caused by internal abrasion and tensile fatigue.” MTS Science and Technology for a New Oceans Decade, MTS, Washington D.C.
Van den Heuvel, C. J. M., Heuvel, H. M., Faasen, W. A., Veurink, J., and Lucas, L. J. (1993). “Molecular changes of PET yarns during stretching measured with rheo-optical infrared spectroscopy and other techniques.” J. Appl. Polym. Sci., 49, 925–934.
Ward, E. G., Ayres, R. R., Banfield, S., O’Hear, N., and Smith, C. E. (2005). “Experimental investigation of damage tolerance of polyester ropes.” Proc., 4th Int. Conf. on Composite Materials for Offshore Operations, CEAC, Houston.
Wu, H. C., Seo, M. H., Backer, S., and Mandell, J. F. (1995). “Structural modeling of double-braided synthetic fiber ropes.” Text. Res. J., 65(11), 619–631.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 22, 2007
Accepted: Jun 19, 2009
Published online: Oct 15, 2009
Published in print: Nov 2009
Notes
Note. Associate Editor: Christian Hellmich
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.