General Realization Algorithm for Modal Identification of Linear Dynamic Systems
Publication: Journal of Engineering Mechanics
Volume 134, Issue 9
Abstract
The general realization algorithm (GRA) is developed to identify modal parameters of linear multi-degree-of-freedom dynamic systems subjected to measured (known) arbitrary dynamic loading from known initial conditions. The GRA extends the well known eigensystem realization algorithm (ERA) based on Hankel matrix decomposition by allowing an arbitrary input signal in the realization algorithm. This generalization is obtained by performing a weighted Hankel matrix decomposition, where the weighting is determined by the loading. The state-space matrices are identified in a two-step procedure that includes a state reconstruction followed by a least-squares optimization to get the minimum prediction error for the response. The statistical properties (i.e., bias, variance, and robustness to added output noise introduced to model measurement noise and modeling errors) of the modal parameter estimators provided by the GRA are investigated through numerical simulation based on a benchmark problem with nonclassical damping.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Support of this research by the National Science Foundation, Grant No. NSFDMI-0131967, under a Blue Road Research STTR Project on which UCSD was the principal subcontractor is gratefully acknowledged. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the writers and do not necessarily reflect those of the National Science Foundation.
References
Alvin, K. F., Robertson, A. N., Reich, G. W., and Park, K. C. (2003). “Structural system identification: From reality to models.” Comput. Struct., 81(12), 1149–1176.
Caughey, T. H., and O’Kelly, M. E. J. (1965). “Classical normal modes in damped linear dynamic systems.” J. Appl. Mech., 32, 583–588.
De Callafon, R. A. (2003). “Estimating parameters in a lumped parameter system with first principle modeling and dynamic experiments.” Proc., 13th IFAC Symp. on System Identification, Rotterdam, The Netherlands, 1613–1618.
Gilbert, E. G. (1963). “Controllability and observability in multivariable control systems.” SIAM J. Control Optim., 1(2), 128–151.
Ho, B. L., and Kalman, R. E. (1966). “Effective construction of linear state-variable models from input–output functions.” Regelungstechnik, 14(12), 545–592.
James, G. H., Carne, T. G., and Lauffer, J. P. (1993). “The natural excitation technique for modal parameters extraction from operating wind turbines.” SAND92-1666, UC-261, Sandia National Laboratories, Sandia, N.M.
Juang, J. N., Cooper, J. E., and Wright, J. R. (1988). “An eigensystem realization algorithm using data correlations (ERA/DC) for model parameter identification.” Control Theory Adv. Technol., 4(1), 5–14.
Juang, J. N., and Pappa, R. S. (1985). “An eigensystem realization algorithm for model parameter identification and model reduction.” J. Guid. Control Dyn., 8(5), 620–627.
Kalman, R. E. (1963). “Mathematical description of linear dynamical systems.” SIAM J. Control Optim., 1(2), 152–192.
Kung, S. Y. (1978). “A new identification and model reduction algorithm via singular value decomposition.” Proc., 12th Asilomar Conf. on Circuits, Systems and Computers, Pacific Grove, Calif., 705–714.
Ljung, L. (1999). System identification: Theory for the user, 2nd Ed., Prentice-Hall, Englewood Cliffs, N.J.
Lus, H., Betti, R., and Longman, R. W. (2002). “Obtaining refined first order predictive models of linear structural systems.” Earthquake Eng. Struct. Dyn., 31(7), 1413–1440.
Moaveni, B., De Callafon, R. A., and Conte, J. P. (2007). “General realization algorithm for modal identification of linear dynamic systems.” Rep. No. SSRP-07/18, Dept. of Structural Engineering, Univ. of California, San Diego.
Noble, B., and Daniel, J. W. (1988). Applied linear algebra, 2nd Ed., Prentice-Hall, Englewood Cliffs, N.J.
Oppenheim, A. V., and Schafer, R. W. (1989). Discrete-time signal processing, Prentice-Hall, Englewood Cliffs, N.J.
Peeters, B., and De Roeck, G. (2001). “Stochastic system identification for operational modal analysis: A review.” J. Dyn. Syst., Meas., Control, 123(4), 659–667.
Peng, B. F., and Conte, J. P. (1998). “Closed-form solutions for the response of linear systems to fully non-stationary earthquake excitation.” J. Eng. Mech., 124(6), 684–694.
Phan, M., Horta, L. G., Juang, J.-N., and Longman, R. W. (1992). “Identification of linear systems by an asymptotically stable observer.” NASA Technical Paper No. TP-3164, Langley Research Center, Hampton, Va.
Phan, M., Juang, J. N., and Longman, R. W. (1991). “On Markov parameters in system identification.” NASA Technical Memorandum No. 104156, Langley Research Center, Hampton, Va.
Silverman, L. M. (1971). “Realization of linear dynamical systems.” IEEE Trans. Autom. Control, 16(6), 554–567.
Vandewalle, J., and de Moor, B. (1988). “On the use of the singular value decomposition in identification and signal processing.” Proc., Workshop of the NATO Advanced Study Institute on Numerical Linear Algebra, Digital Signal Processing and Parallel Algorithms, Leuven, Belgium, 321–360.
Van Overschee, P., and de Moor, B. (1996). Subspace identification for linear systems, Kluwer Academic, Boston.
Veletsos, A. S., and Ventura, C. E. (1986). “Modal analysis of non-classically damped linear systems.” Earthquake Eng. Struct. Dyn., 14(2), 217–243.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Nov 3, 2006
Accepted: Feb 25, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Notes
Note. Associate Editor: Lambros S. Katafygiotis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.