Eulerian Structure of Generalized Plasticity: Theoretical and Computational Aspects
Publication: Journal of Engineering Mechanics
Volume 134, Issue 5
Abstract
In this work a new Eulerian approach to large deformation generalized plasticity, within the context of affine tensor analysis in Euclidean spaces, is presented. The approach relies crucially on the systematic use of the Lie derivative concept. Classical plasticity is then derived, as a special case of generalized plasticity. The computational implications resulting from the absence of the requirement for the existence of a yield surface in the theory of generalized plasticity are discussed. On the basis of those implications a general integration scheme is proposed. As an application, a generalized plasticity model in large deformations is presented. The proposed model is then used for the solution of boundary value problems.
Get full access to this article
View all available purchase options and get full access to this article.
References
Atluri, S. N. (1984). “On constitutive relations at finite strain: Hypo-elasticity and elasto-plasticity with isotropic or kinematic hardening.” Comput. Methods Appl. Mech. Eng., 43(2), 137–171.
Bertram, A. (1998). “An alternative approach to finite plasticity based on isomorphisms.” Int. J. Plast., 14, 353–374.
Bodner, S. R., and Partom, Y. (1975). “Constitutive equations for elastic-viscoplastic strain-hardening materials.” J. Appl. Mech., 42, 385–389.
Bruhns, O. T., Xiao, H., and Meyers, A. (1999). “Self-consistent Eulerian type elasto-plasticity models based upon the logarithmic stress rate.” Int. J. Plast., 15, 479–520.
Bruhns, O. T., Xiao, H., and Meyers, A. (2003). “Some basic issues in traditional Eulerian formulations of finite elastoplasticity.” Int. J. Plast., 19, 2007–2026.
Cleja-Tigoiu, S., and Soos, E. (1990). “Elastoviscoplastic models with relaxed configurations and internal state variables.” Appl. Mech. Rev., 43, 131–151.
Dafalias, Y. F. (1983). “Co-rotational rates for kinematic hardening at large plastic deformations.” J. Appl. Mech., 40, 561–565.
Dafalias, Y. F. (1985). “The plastic spin.” J. Appl. Mech., 52, 865–871.
Eisenberg, M. A., and Phillips, A. (1971). “A theory of plasticity with non-coincident yield and loading surfaces.” Acta Mech., 11, 247–260.
Green, A. E., and Naghdi, P. M. (1965). “A general theory of an elasto-plastic continuum.” Arch. Ration. Mech. Anal., 18, 251–281.
Green, A. E., and Naghdi, P. M. (1971). “Some remarks on elastic-plastic deformation at finite strains.” Int. J. Eng. Sci., 9, 1219–1229.
Haupt, P., and Tsakmakis, C. (1986). “On kinematic hardening and large plastic deformations.” Int. J. Plast., 2, 279–293.
Hughes, T. J. R., and Winget, J. (1980). “Finite rotation effects in numerical integration of rate constitutive equations arising in large deformation analysis.” Int. J. Numer. Methods Eng., 15, 1862–1867.
Key, S. W., and Krieg, R. D. (1982). “On the numerical implementation of inelastic time dependent, finite strain constitutive equations in structural mechanics.” Comput. Methods Appl. Mech. Eng., 33, 439–432.
Kleiber, M. (1975). “Kinematics of deformation processes in materials subjected to finite elastoplastic strains.” Int. J. Eng. Sci., 13, 413–525.
Le, K. H., and Stumpf, H. (1993). “Constitutive equations for elastoplastic bodies at finite strain: Thermodynamic implementation.” Acta Mech., 100, 155–170.
Lee, E. H., Mallet, R. L., and Wertheimer, T. B. (1983). “Stress analysis for anisotropic hardening in finite deformation plasticity.” J. Appl. Mech., 50, 554–560.
Lovelock, D., and Rund, H. (1989). Tensors, differential forms and variational principles, Dover, New York.
Lubliner, J. (1974). “A simple theory of plasticity.” Int. J. Solids Struct., 10, 313–319.
Lubliner, J. (1975). “On loading, yield and quasi-yield hypersurfaces in plasticity theory.” Int. J. Solids Struct., 11, 1011–1016.
Lubliner, J. (1986). “Normality rules in large-deformation plasticity.” Mech. Mater., 5, 29–34.
Lubliner, J. (1987). “Non-isothermal generalized plasticity.” Thermo-mechanical couplings in solids, H. D. Bui and Q. S. Nyugen, eds., 121–133.
Lucchesi, M., and Podio-Guidugli, P. (1992). “Materials with elastic range: A theory with a view toward applications: Part II.” Arch. Ration. Mech. Anal., 110, 9–42.
Marsden, J. E., and Hughes, T. J. R. (1994). Mathematical foundations of elasticity, Dover, New York.
McMeeking, R. M., and Rice, J. R. (1975). “Finite-element formulations for problems of large elastoplastic deformations.” Int. J. Solids Struct., 11, 601–616.
Miehe, C. (1998). “A constitutive frame of elastoplasticity at large strains based on the notion of a plastic metric.” Int. J. Solids Struct., 35, 3859–3897.
Naghdi, P. M. (1990). “A critical review of the state of finite plasticity.” Z. Angew. Math. Phys., 41, 315–387.
Nagtegall, J. C., and De Jong, J. E. (1981). “Some computational aspects of elastic-plastic large strain analysis.” Int. J. Numer. Methods Eng., 17, 15–41.
Nemat-Nasser, S. (1982). “On finite deformation elastoplasticity.” Int. J. Solids Struct., 18, 857–872.
Ogden, R. W. (1984). Non-linear elastic deformations, Ellis Horwood Ltd., West Sussex, U.K.
Pinsky, P. M., Ortiz, M., and Pister, K. S. (1983). “Numerical integration of rate constitutive equations in finite deformation analysis.” Comput. Methods Appl. Mech. Eng., 40, 137–158.
Pipkin, A. C., and Rivlin, R. S. (1965). “Mechanics of rate-independent materials.” Z. Angew. Math. Phys., 16, 313–326.
Rivlin, R. S. (1955). “Further remarks on the stress-deformation relations for isotropic materials.” J. Ration. Mech. Anal., 4, 681–702.
Rubinstein, R., and Atluri, S. N. (1983). “Objectivity of incremental constitutive relations over finite time steps in computational finite deformation analyses.” Comput. Methods Appl. Mech. Eng., 36, 277–293.
Simo, J. C. (1988). “A framework for finite strain elastoplasticity based on maximum plastic dissipation and multiplicative decomposition. Part I: Continuum formulation.” Comput. Methods Appl. Mech. Eng., 66, 199–219.
Simo, J. C., and Hughes, T. J. R. (1997). Computational inelasticity, Springer, New York.
Simo, J. C., and Marsden, J. E. (1984). “On the rotated stress tensor and the material version of the Doyle-Ericksen formula.” Arch. Ration. Mech. Anal., 86, 213–231.
Simo, J. C., and Ortiz, M. (1985). “A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive equations.” Comput. Methods Appl. Mech. Eng., 49, 221–245.
Simo, J. C., and Pister, K. S. (1984). “Remarks on rate constitutive equations for finite deformation problems: Computational implications.” Comput. Methods Appl. Mech. Eng., 46, 201–215.
Stumpf, H., and Hoppe, U. (1997). “The application of tensor algebra on manifolds to nonlinear continuum mechanics—Invited survey article.” Z. Angew. Math. Mech., 5, 327–339.
Truesdell, C. (1955). “Hypo-elasticity.” J. Ration. Mech. Anal., 4, 83–133, 1019–1020.
Wang, N. M., and Budiansky, B. (1978). “Analysis of sheet metal stamping by a finite-element method.” J. Appl. Mech., 45, 73–82.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 134 • Issue 5 • May 2008
Pages: 354 - 361
Copyright
© 2008 ASCE.
History
Received: May 18, 2007
Accepted: Jul 18, 2007
Published online: May 1, 2008
Published in print: May 2008
Notes
Note. Associate Editor: George Z. Voyiadjis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.