Linearized Stability and Accuracy for Step-by-Step Solutions of Certain Nonlinear Systems
Publication: Journal of Engineering Mechanics
Volume 134, Issue 12
Abstract
In this work, stability and accuracy of the Newmark method for nonlinear systems are obtained from a linearized analysis. This analysis reveals that an unconditionally stable integration method for linear elastic systems is unconditionally stable for nonlinear systems and a conditionally stable integration method for linear elastic systems remains conditionally stable for nonlinear systems except that its upper stability limit might vary with the step degree of nonlinearity and step degree of convergence. A sufficient condition to have a stable computation for nonlinear systems in a whole step-by-step integration procedure is also developed in this study. Furthermore, it is also found that numerical accuracy in the solution of nonlinear systems is closely related to the step degree of nonlinearity and step degree of convergence although its characteristics are similar to those of the preceding works for linear elastic systems. Since these results are obtained from a linearized analysis, they can be applicable to the nonlinear systems that satisfied the simplifications for the analysis but may not be applicable to general nonlinear systems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writer is grateful to acknowledge that this study is financially supported by the National Science Council of Taiwan, R.O.C., under Grant No. NSCTNSC-94-2211-E-027-011.
References
Argyris, J., Papadrakakis, M., and Mauroutis, Z. S. (2003). “Nonlinear dynamic analysis of shells with the triangular element TRIC.” Comput. Methods Appl. Mech. Eng., 192, 3005–3038.
Armero, F., and Petocz, E. (1998). “Formulation and analysis of conserving algorithms for frictionless dynamic contact/impact problems.” Comput. Methods Appl. Mech. Eng., 158, 269–300.
Bathe, K. J., and Wilson, E. L. (1973). “Stability and accuracy analysis of direct integration methods.” Earthquake Eng. Struct. Dyn., 1, 283–291.
Belytschko, T., and Hughes, T. J. R. (1983). Computational methods for transient analysis, Elsevier Science, North-Holland, Amsterdam.
Belytschko, T., and Schoeberle, D. F. (1975). “On the unconditional stability of an implicit algorithm for nonlinear structural dynamics.” J. Appl. Mech., 17, 865–869.
Betsch, P., and Steinmann, P. (2000). “Conservation properties of a time FE method. Part I: Time-stepping schemes for N-body problems.” Int. J. Numer. Methods Eng., 49, 599–638.
Chang, S. Y. (1996). “A series of energy conserving algorithms for structural dynamics.” J. Chin. Inst. Eng., 19(2), 219–230.
Chang, S. Y. (1997). “Improved numerical dissipation for explicit methods in pseudodynamic tests.” Earthquake Eng. Struct. Dyn., 26, 917–929.
Chang, S. Y. (2002). “An evaluation technique for inelastic dynamic analysis.” J. Chin. Inst. Civ. Hydraul. Eng., 14(3), 467–475 (in Chinese).
Chang, S. Y. (2007). “Improved explicit method for structural dynamics.” J. Eng. Mech., 133(7), 748–760.
Crisfield, M. A., Galvanetto, U., and Jelenic, G. (1997). “Dynamics of 3-D co-rotational beams.” Comput. Mech., 20, 507–519.
Dobbs, M. W. (1974). “Comments on ‘Stability and accuracy analysis of direct integration methods’ by Bathe and Wilson.” Earthquake Eng. Struct. Dyn., 2, 295–299.
Goudreau, G. L., and Taylor, R. L. (1972). “Evaluation of numerical integration methods in elasto-dynamics.” Comput. Methods Appl. Mech. Eng., 2, 69–97.
Hilber, H. M., and Hughes, T. J. R. (1978). “Collocation, dissipation, and ‘overshoot’ for time integration schemes in structural dynamics.” Earthquake Eng. Struct. Dyn., 6, 99–118.
Hilber, H. M., Hughes, T. J. R., and Taylor, R. L. (1977). “Improved numerical dissipation for time integration algorithms in structural dynamics.” Earthquake Eng. Struct. Dyn., 5, 283–292.
Houbolt, J. C. (1950). “A recurrence matrix solution for the dynamic response of elastic aircraft.” J. Aeronaut. Sci., 17, 540–550.
Hughes, T. J. R. (1976). “Stability, convergence and growth and decay of energy of the average acceleration method in nonlinear structural dynamics.” Comput. Struct., 6, 313–324.
Hughes, T. J. R. (1987). The finite element method, Prentice-Hall, Inc., Englewood Cliffs, N.J.
Hughes, T. J. R., Caughy, T. K., and Liu, W. K. (1978). “Finite-element methods for nonlinear elasto-dynamics which conserve energy.” J. Appl. Mech., 45, 366–370.
Kuhl, D., and Crisfield, M. A. (1999). “Energy-conserving and decaying algorithms in nonlinear structural dynamics.” Int. J. Numer. Methods Eng., 45, 569–599.
Kuhl, D., and Ramm, E. (1996). “Consistent energy momentum algorithm and its application to nonlinear dynamics of shells.” Comput. Methods Appl. Mech. Eng., 136, 293–315.
Newmark, N. M. (1959). “A method of computation for structural dynamics.” J. Engrg. Mech. Div., 85, 67–94.
Ortega, J. M. (1972). Numerical analysis—A second course, Academic, New York.
Park, K. C. (1975). “An improved stiffly stable method for direct integration of nonlinear structural dynamic equations.” J. Appl. Mech., 42, 464–470.
Simo, J. C., and Tarnow, N. (1994). “A new energy and momentum conserving algorithm for the nonlinear dynamics shells.” Int. J. Numer. Methods Eng., 37, 2527–2549.
Strang, G. (1986). Linear algebra and its applications, Harcourt Brace Jovanovich, San Diego.
Wood, W. L., Bossak, M., and Zienkiewicz, O. C. (1981). “An alpha modification of Newmark’s method.” Int. J. Numer. Methods Eng., 15, 1562–1566.
Zienkiewicz, O. C. (1977a). The finite element method, 3rd Ed., McGraw-Hill, London.
Zienkiewicz, O. C. (1977b). “A new look at the Newmark, Houbolt and other time stepping formulas. A weighted residual approach.” Earthquake Eng. Struct. Dyn., 5, 413–418.
Zienkiewicz, O. C., Wood, W. L., Hine, N. W., and Taylor, R. L. (1984). “A unified set of single time step algorithms. Part I: General formulation and applications.” Int. J. Numer. Methods Eng., 20, 1529–1552.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jul 11, 2006
Accepted: May 16, 2008
Published online: Dec 1, 2008
Published in print: Dec 2008
Notes
Note. Associate Editor: Jiun-Shyan Chen
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.