Artificial Ground Freezing of Fully Saturated Soil: Viscoelastic Behavior
Publication: Journal of Engineering Mechanics
Volume 134, Issue 1
Abstract
The transport and mechanical properties of saturated soil drastically change when temperatures drop below the freezing temperature of water. During artificial ground freezing, this change of properties is exploited in order to minimize deformations during construction work and for groundwater control. Whereas for the latter only the size of the frozen-soil body is relevant, which is obtained by solving the thermal problem, the design of the ground-freezing work for support purposes requires information about the mechanical behavior of frozen soil. In addition to the quantification of the improvement of mechanical properties during freezing, information about the dilation associated with the 9% volume increase of water during freezing is required in order to assess the risk of damage to surface infrastructure caused by frost heave. In this paper, a micromechanics-based model for the prediction of both the aforementioned phase-change dilation and the elastic and viscous properties of freezing saturated soil is presented. Hereby, the macroscopic material behavior is related to the behavior of the different constituents such as soil particles, water, and ice. Combined with the solution of the thermal problem, the proposed model provides the basis for predictions of the performance of support structures composed of frozen soil.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers want to thank Lothar Martak and Thomas Herzfeld (MA29, Vienna, Austria) for valuable discussions and for providing access to construction sites in the Vienna area. Helpful comments by Roger Heil (Walter & Bai AG, Switzerland) and Thorsten Wille (Wille Geotechnik GmbH, Germany) on the triaxial testing equipment employed are gratefully acknowledged.
References
Abdel-Tawab, K., and Rodin, G. (1997). “Analysis of primary creep of S2 fresh-water and saline ice.” Cold Regions Sci. Technol., 26, 83–96.
Da Re, G. (2000). “The behavior of frozen Manchester fine sand at small strains in triaxial compression.” Ph.D. thesis, Massachusetts Institute of Technology, Cambridge, Mass.
Da Re, G., Germaine, J., and Ladd, C. (1999). “Strain rate and temperature dependency of the modulus of frozen Manchester fine sand.” Prefailure Deformation Characteristics of Geomaterials, Proc., 2nd Int. Symp., M. Jamiolkowski, D. Lo Presti, and R. Lancellotta, eds., Balkema, Rotterdam, The Netherlands.
Da Re, G., Germaine, J., and Ladd, C. C. (2003). “Triaxial testing of frozen sand: Equipment and example results.” J. Cold Reg. Eng., 17(3), 90–118.
Eshelby, J. (1957). “The determination of the elastic field of an ellipsoidal inclusion, and related problems.” Proc. R. Soc. London, Ser. A, 241, 376–396.
Lackner, R., Amon, A., and Lagger, H. (2005). “Artificial ground freezing of fully-saturated soil: Thermal problem.” J. Eng. Mech., 131(2), 211–220.
Lee, E. (1955). “Stress analysis in viscoelastic bodies.” Q. Appl. Math., 13, 183–190.
Mandel, J. (1966). Mécanique des milieux continus. Gauthier, Paris (in French).
Mori, T. and Tanaka, K. (1973). “Average stress in matrix and average elastic energy of materials with misfitting inclusions.” Acta Metall., 21, 571–574.
Nabarro, F. (2001). “Creep mechanism in crystalline solids.” Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd., Amsterdam, The Netherlands, 1788–1795.
Orth, W. (1986). “Gefrorener Sand als Werkstoff–Elementversuche und Materialmodell.” Ph.D. thesis, Universität Karlsruhe, Karlsruhe, Germany (in German).
Poetsch, H. (1883). “Verfahren zur Abteufung von Schächten in schwimmendem Gebirge.” Patentschrift Nr. 25015, patentiert im Deutschen Reiche [patent specification, German patent no. 25015] (in German).
Sinha, N. (1978). “Rheology of columnar-grained ice.” Exp. Mech., 18(12), 464–470.
Stehfest, H. (1970). “Algorithm 368: Numerical inversion of Laplace transforms.” Commun. ACM, 13, 47–49.
Torquato, S. (2002). Random heterogeneous materials, Springer, Berlin.
Zaoui, A. (2002). “Continuum micromechanics: Survey.” J. Eng. Mech., 128(8), 808–816.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Jan 6, 2005
Accepted: Nov 4, 2005
Published online: Jan 1, 2008
Published in print: Jan 2008
Notes
Note. Associate Editor: Yunping Xi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.