Direct Numerical Simulation of Turbulent Flow in a Square Duct: Analysis of Secondary Flows
Publication: Journal of Engineering Mechanics
Volume 133, Issue 2
Abstract
A direct numerical simulation of turbulent flow in a square duct was performed for a Reynolds number based on bulk streamwise velocity and duct height equal to 4,440. The mechanism by which secondary flows are generated in a square duct was investigated. Two counterrotating secondary flows occur around the duct corner. These secondary flows were found to play a key role in momentum transfer between the corner and center of the duct. A conditional quadrant analysis was performed in the local maximum and minimum regions of the wall shear stress in order to characterize the pattern of the mean secondary flows.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was partly supported by 21st Century Frontier Research Program (Code No. 2–3–2 from Sustainable Water Resources Research Center) of the Ministry of Science of Technology in Korea. The writers would like to thank Professor Sedat Biringen, Aerospace Engineering Sciences, University of Colorado at Boulder, who kindly provided the simulation data in Huser and Biringen (1993).
References
Balint, J.-L., Wallace, J. M., and Vukoslavčević, P. (1991). “The velocity and vorticity vector fields of a turbulent boundary layer. Part 2: Statistical properties.” J. Fluid Mech., 228, 53–86.
Beam, R. M., and Warming, R. F. (1976). “An implicit finite-difference algorithm for hyperbolic systems in conservation law form.” J. Comput. Phys., 22, 87–110.
Bradshaw, P. (1987). “Turbulent secondary flows.” Annu. Rev. Fluid Mech., 19, 53–74.
Brundrett, E., and Baines, W. D. (1964). “The production and diffusion of vorticity in a square duct.” J. Fluid Mech. 19, 375–394.
Cheesewright, R., McGrath, G., and Perry, D., (1990). “LDA measurements of turbulent flow in a duct of square cross section at low Reynolds number.” Aeronautical Engineering Dept. Rep. ER 1011, Queen Mary Westfield College, Univ. of London, London.
Demuren, A. O. (1991). “Calculation of turbulence-driven secondary motion in ducts with arbitrary cross section.” AIAA J., 29(4), 531–537.
Demuren, A. O., and Rodi, W. (1984). “Calculation of turbulence-driven secondary motion in non-circular ducts.” J. Fluid Mech., 140, 189–222.
Dukowicz, J. K., and Dvinsky, A. S. (1992). “Approximate factorization as a high-order splitting for the implicit incompressible flow equations.” J. Comput. Phys., 102, 336–347.
Gavrilakis, S. (1992). “Numerical simulation of low-Reynolds-number turbulent flow through a straight square duct.” J. Fluid Mech., 244, 101–129.
Gessner, F. B. (1973). “The origin of secondary flow in turbulent flow along a corner.” J. Fluid Mech. 58, 1–25.
Gessner, F. B., Po, J. K., and Emery, A. F. (1979). “Measurements of developing turbulent flow in a square duct.” Turbulent shear flows, Vol. I, F. Durst, et al., eds., Springer, New York, 119–136.
Huser, A., and Biringen, S. (1993). “Direct numerical simulation of turbulent flow in a square duct.” J. Fluid Mech., 257, 65–95.
Huser, A., Biringen, S., and Hatay, F. F. (1994). “Direct simulation of turbulent flow in a square duct: Reynolds-stress budgets.” Phys. Fluids, 6(9), 3144–3152.
Kim, J., and Moin, P. (1985). “Application of a fractional step method to incompressible Navier-Stokes equations.” J. Comput. Phys. 59, 308–323.
Kim, K., Baek, S.-J., and Sung, H. J. (2002). “An implicit velocity decoupling procedure for the incompressible Navier–Stokes equations.” Int. J. Numer. Methods Fluids, 38(2), 125–138.
Knight, D. W., Demetriou, J. D., and Hamed, M. E. (1984). “Boundary shear in smooth rectangular channels.” J. Hydraul. Eng., 110(4), 405–422.
Launder, B. E. (1990). “Phenomenological modeling: Present . . . and future? Whither turbulence?” Turbulence at the crossroads, Lecture Notes in Physics, J. L. Lumley, ed., Springer, Berlin, 357 and 439.
Leutheusser, H. J. (1963). “Turbulent flow in rectangular ducts.” J. Hydr. Div., 89(3), 1–19.
Madabhushi, R. K., and Vanka, S. P. (1991). “Large-eddy simulation of turbulence-driven secondary flow in a square duct.” Phys. Fluids A, 3(11), 2734–2745.
Moser, R. D., Kim, J., and Mansour, N. N. (1999). “Direct numerical simulation of turbulent channel flow up to .” Phys. Fluids, 11(4), 943–945.
Naot, D., and Rodi, W. (1982). “Calculation of secondary currents in channel flow.” J. Hydr. Div., 108(8), 948–968.
Nezu, I., Nakagawa, H., and Tominaga, A. (1985). “Secondary currents in a straight channel flow and the relation to its aspect ratio.” Turbulent shear flows 4, Springer, Berlin, 246–260.
Niederschulte, M. A. (1989). Turbulent flow through a rectangular channel, Ph.D. thesis, Univ. of Illinois at Urbana-Champaign, Ill.
Perot, J. B. (1993). “An analysis of the fractional step method.” J. Comput. Phys., 108, 51–58.
Tannehill, J. C., Anderson, D. A., and Pletcher, R. H. (1984). Computational fluid mechanics and heat transfer, McGraw-Hill, New York.
Vázquez, M. S., and Métais, O. (2002). “Large-eddy simulation of the turbulent flow through a heated square duct.” J. Fluid Mech., 453, 201–238.
Willmarth, W. W. (1975). “Pressure fluctuations beneath turbulent boundary layers.” Annu. Rev. Fluid Mech., 7, 13–36.
Yokosawa, H., Fujita, H., Hirota, M., and Iwata, S. (1989). “Measurement of turbulent flow in a square duct with roughened walls on two opposite sides.” Int. J. Heat Fluid Flow, 10(2), 125–130.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Oct 28, 2003
Accepted: Sep 28, 2005
Published online: Feb 1, 2007
Published in print: Feb 2007
Notes
Note. Associate Editor: Robert J. Martinuzzi
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.