Uncoupling of Potential Energy in Nonlinear Seismic Analysis of Framed Structures
Publication: Journal of Engineering Mechanics
Volume 133, Issue 10
Abstract
A computational analysis method is presented to investigate the potential energy of fully nonlinear framed structures and other energy characteristics due to earthquake ground motions. The overall potential energy is directly related to the stiffness of the structure, and it consists of three components in a fully nonlinear system: (1) strain energy representing the storing energy that is associated with the linear elastic portion of the structural response; (2) higher-order energy representing the energy associated with the geometric nonlinear effect of the overall structural response, which is derived from finite element method; and (3) plastic energy representing the energy dissipated by material inelasticity of the structure, and it is being derived analytically. The merit of proposed analysis method lies in the uncoupling of geometric nonlinearity and material inelasticity effects before solving for the equation of motion, and this leads directly to the analytical representations of each energy form. Both plastic energy and higher-order energy based on single-degree-of-freedom system are studied in detail to demonstrate the beauty of the proposed analysis method. In addition, a method of generating energy density spectra is also proposed, which is useful to enhance the understanding energy characteristics in seismic analysis. Finally, a five-story frame is used as a numerical example to illustrate the effectiveness and robustness of the proposed method.
Get full access to this article
View all available purchase options and get full access to this article.
References
Akbas, B., Shen, J., and Hao, H. (2001). “Energy approach in performance based seismic design of steel moment resisting frames for basic safety objective.” Struct. Des. Tall Build., 10(3), 193–217.
American Institute of Steel Construction (AISC). (1997). Seismic provisions for structural steel buildings, Chicago.
Bathe, K. J. (1996). Finite element procedures, Prentice-Hall, Englewood Cliffs, N.J.
Chen, H. (2000). “Nonlinear inelastic analysis of steel-concrete composite frames.” Ph.D. thesis, National Univ. of Singapore, Singapore.
Chen, W. F., and Lui, E. M. (1991). Stability design for steel frames, CRC, Boca Raton, Fla.
Computer and Structures Inc. (CSI). (2002). SAP2000 nonlinear version 8, Berkeley, Calif.
Cook, R. D., Malkus, D. S., Plesha, M. E., and Witt, R. J. (2001). Concepts and applications of finite element analysis, 3rd Ed., Wiley, New York.
EuroCode 8. (1995). Design provisions for earthquake resistance of structures, Parts 1-3, General Rules, ENV 1998-1 to 1998-3, London.
Federal Emergency Management Agency (FEMA). (2000). “Recommended seismic design criteria for new steel moment frames.” FEMA 350, SAC Joint Venture, Washington, D.C.
Fu, Y., and Kasai, K. (1998). “Comparative study of frames using visco elastic and viscous dampers.” J. Struct. Eng., 124(5), 513–552.
Goel, R. K. (1997). “Seismic response of asymmetric systems: Energy-based approach.” J. Struct. Eng., 123(11), 1444–1453.
Iwan, W. D. (1980). “Estimating inelastic response spectra from elastic spectra.” Earthquake Eng. Struct. Dyn., 8(4), 375–388.
Lawson, R. S., Vance, V., and Krawinkler, H. (1994). “Nonlinear static push-over analysis—Why, when, and how?” Proc., 5th U.S. National Conf. on Earthquake Engineering, Earthquake Engineering Research Institute, Vol. I, Oakland Calif., 283–292.
Mahin, S. A., and Bertero, V. V. (1981). “An evaluation of inelastic seismic design spectra.” J. Struct. Div., 107(9), 1777–1795.
Ministry of Construction of China. (2001). “Code for seismic design of buildings.” GB50011, Beijing.
Shen, J., and Akbas, B. (1999). “Seismic energy demand in steel moment frames.” J. Earthquake Eng., 3(4), 519–559.
Uang, C. M., and Bertero, V. V. (1990). “Evaluation of seismic energy in structures” Earthquake Eng. Struct. Dyn., 19(1), 77–90.
Wong, K. K. F. (2004). “Inelastic seismic response analysis based on energy density spectra.” J. Earthquake Eng., 8(2), 315–334.
Wong, K. K. F., and Yang, R. (1999). “Inelastic dynamic response of structures using force analogy method.” J. Eng. Mech., 125(10), 1190–1199.
Wong, K. K. F., and Yang, R. (2002). “Earthquake response and energy evaluation of inelastic structures.” J. Eng. Mech., 128(3), 308–317.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Nov 17, 2005
Accepted: Feb 12, 2007
Published online: Oct 1, 2007
Published in print: Oct 2007
Notes
Note. Associate Editor: Lambros S. Katafygiotis
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.