Damage Theory Based on Composite Mechanics
Publication: Journal of Engineering Mechanics
Volume 132, Issue 11
Abstract
A new theory of composite damage mechanics is developed. A material with damage is considered as a composite comprised of two different phases (called matrix and inclusion). Both phases are linearly elastic isotropic materials. The matrix is considered as the intact material, and the inclusion is the damaged material. Three different composite models, Voigt (parallel), Reuss (serial), and generalized self-consistent (spherical), are introduced for three types of damage distributions. These composite models are usually used for initial tangential modulus of a composite material, here we use them for secant modulus of a distressed material. Since the parallel and the serial models represent the upper and lower bounds for stiffness of materials, the composite damage theory obtains the upper and lower bounds for postpeak stress and the level of damage for the material beyond the elastic limit. The spherical model is in between the two bounds. Depending on the “elastic limit” of the inclusion, the theory can be used to describe elastic perfectly plastic behavior, strain hardening, and strain softening. Two different degradations, the linear and exponential degradations of the stress–strain response curve are introduced. The two degradation models are used in two different failure surfaces, i.e., Tresca and Mohr–Coulomb failure surfaces, to predict the postpeak behavior of distressed material.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Partial financial support under NSF Grant No. ACI-0112930 to the University of Colorado at Boulder is gratefully acknowledged.
References
Bernard, O., Ulm, F.-J., and Lemarchand, E. (2003). “A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials.” Cem. Concr. Res., 33(9), 1293–1309.
Chaboche, J. L. (1999). “Thermodynamically founded CDM models for creep and other conditions.” Creep and damage in materials and structures, H. Altenbach and J. J. Skrzypek, eds., Springer Wien, New York.
Chen, W. F., and Han, D. J. (1988). Plasticity for structural engineers, Springer, New York.
Christensen, R. M. (1979). Mechanics of composite materials, Wiley-Interscience, New York.
Christensen, R. M. (1990). “A critical evaluation for a class of micro-mechanics models.” J. Mech. Phys. Solids, 38(3), 379–404.
Christensen, R. M., and Lo, K. H. (1979). “Solutions for effective shear properties in three phase sphere and cylinder models.” J. Mech. Phys. Solids, 27(4), 315–330.
Coleman, B. D., and Gurtin, M. E. (1967). “Thermodynamics with internal state variables.” J. Chem. Phys., 47(2), 597–613.
Coleman, B. D., and Noll, W. (1964). “The thermodynamics of elastic materials with heat conduction and viscosity.” Arch. Ration. Mech. Anal., 13, 167–178.
Hashin, Z. (1983). “Analysis of composite materials: A survey.” J. Appl. Mech., 50(3), 481–505.
Hershey, A. V. (1954). “The elasticity of an isotropic aggregate of anisotropic cubic crystals.” J. Appl. Mech., 21, 236–240.
Hervé, E., and Zaoui, A. (1993). “ -layered inclusion-based micromechanical modeling.” Int. J. Eng. Sci., 31(1), 1–10.
Kachanov, M., Tsukrov, I., and Shafiro, B. (1994). “Effective moduli of solids with cavities of various shapes.” Appl. Mech. Rev., 47(1-2), S151–S174.
Krajcinovic, D. (1989). “Damage mechanics.” Mech. Mater., 8(2-3), 117–197.
Krajcinovic, D. (1996). Damage mechanics, North-Holland, Amsterdam, The Netherlands.
Lee, J., and Fenves, G. L. (1998). “Plastic-damage model for cyclic loading of concrete structures.” J. Eng. Mech., 124(8), 892–900.
Lemaitre, J. (1992). A course on damage mechanics, Springer, Berlin.
Lubliner, J., Oliver, J. S., and Onste, E. (1989). “A plastic damage model for concrete.” Int. J. Solids Struct., 25(3), 299–326.
Mazards, J., and Pijaudier-Cabot, G. (1996). “From damage to fracture mechanics and conversely: A combined approach.” Int. J. Solids Struct., 33(20-22), 3327–3342.
Mori, T., and Tanaka, K. (1973). “Average stress in the matrix and average elastic energy of materials with misfitting inclusions.” Acta Metall., 21(5), 571–574.
Murakami, S., and Ohno, N. (1981). “A continuum theory of creep and creep damage.” Creep in structures, A. Ponter and D. Hayhurst, eds., Leicester, U.K., 422–443.
Ozbolt, J., and Ananiev, S. (2003). “Scalar damage model for concrete without explicit evolution law.” Computational modeling of concrete structures, N. Bicanic, R. de Borst, H. Mang, and G. Meschke, eds., Swets & Zeitlinger, Lisse, The Netherlands, 287–293.
Pensée, V., Kondo, D., and Dormieux, L. (2002). “Micromechanical analysis of anisotropic damage in brittle materials.” J. Eng. Mech., 128(8), 889–897.
Pijaudier-Cabot, G., Gerard, B., and Moles, L. (1998). “Damage mechanics of concrete structures subjected to mechanical and environmental actions.” Computational modeling of concrete structures, R. de Borst, N. Bicanic, H. Mang, and G. Meschke, eds., Balkema, Rotterdam, The Netherlands, 567–576.
Simo, J. C., and Ju, J. W. (1987). “Stress and strain based continuum damage model. I: Formulation.” Int. J. Solids Struct., 23(7), 821–840.
Xi, Y. (2002). “A composite theory for diffusivity of distressed materials.” Proc., 15th ASCE Engineering Mechanics Conf. (CD-ROM), Columbia Univ., New York, ⟨http://www.civil.columbia.edu/em2002/⟩, Paper No. 535.
Xi, Y., and Jennings, M. (1997). “Shrinkage of cement paste and concrete modeled by a multiscale effective homogeneous theory.” Mater. Struct., 30, 329–334.
Xi, Y., and Nakhi, A. (2005). “Composite damage models for diffusivity of distressed materials.” J. Mater. Civ. Eng., 17(3), 286–295.
Zaoui, A. (2002). “Continuum Micromechanics: Survey.” J. Eng. Mech., 128(8), 808–816.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Feb 13, 2004
Accepted: Mar 16, 2006
Published online: Nov 1, 2006
Published in print: Nov 2006
Notes
Note. Associate Editor: Christian Hellmich
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.