Mixed Integer Nonlinear Least-Squares Problem for Damage Detection in Truss Structures
Publication: Journal of Engineering Mechanics
Volume 131, Issue 7
Abstract
We present a mixed integer nonlinear least-squares problem for identifying damage in truss structures from their measured response. In detecting damage based on parameter estimation, the number of unknown parameters is often less than that of measurements, which gives rise to nonunique solutions. To overcome the difficulty, we formulate damage detection as a mixed integer nonlinear least-squares problem, where the subset of unknown parameters is sought that best represents damaged sites. To solve the problem, we present four heuristic algorithms based on the greedy algorithm. One is its direct application. The other three select the near-optimal subsets more efficiently by linearizing the error function, by applying the line search, and by grouping unknown parameters. We assess the performance of these algorithms along with conventional regularization methods through numerical experiments, where many synthetic damage cases are tested. The effect of modeling and measurement errors on the estimate is also studied. We found from the numerical experiments that the linearization-based approach was more efficient than the direct application while the two methods gave reasonably accurate estimates.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
This research was supported by Grant-in-Aid No. UNSPECIFIED15760425 from the Japan Society for the Promotion of Science.
References
Cobb, D. G., and Liebst, B. S. (1997). “Sensor placement and structural damage identification from minimal sensor information.” AIAA J., 35(2), 369–374.
Coleman, T., Branch, M. A., and Grace, A. (1999). Optimization Toolbox Ver. 2, The Math Works, Natick, Mass.
Coleman, T., and Li, Y. (1996). “An interior, trust region approach for nonlinear minimization subject to bounds.” SIAM J. Optim., 6, 418–445.
Contursi, T., Mangialardi, L. M., and Messina, A. (1998). “Detection of structural faults by modal data, lower bounds and shadow sites.” J. Sound Vib., 210(2), 267–278.
Farrar, C. R., and Doebling, S. W. (1999). “Damage detection and evaluation II.” Modal analysis and testing, J. M. M. Silva, and N. M. M. Maia, eds., Kluwer Academic, Dordrecht, The Netherlands, 345–378.
Friswell, M. I., and Mottershead, J. E. (1995). Finite element model updating in structural dynamics, Kluwer Academic, Dordrecht, The Netherlands.
Friswell, M. I., Penny, J. E. T., and Garvey, S. D. (1997). “Parameter subset selection in damage location.” Inverse Probl. Eng., 5(3), 189–215.
Ge, L., and Soong, T. T. (1998). “Damage identification through regularization method. I: Theory.” J. Eng. Mech., 124(1), 103–108.
Gill, P. E., Murray, W., and Wright, M. H. (1981). Practical optimization, Academic, London.
Hassiotis, S., and Jeong, G. D. (1995). “Identification of stiffness reductions using natural frequencies.” J. Eng. Mech., 121(10), 1106–1113.
He, J. (1999). “Damage detection and evaluation I.” Modal analysis and testing, J. M. M. Silva, and N. M. M. Maia, eds., Kluwer Academic, Dordrecht, The Netherlands, 325–344.
Hjelmstad, K. D., and Shin, S. (1997). “Damage detection and assessment of structures from static response.” J. Eng. Mech., 123(6), 568–576.
Lallement, G., and Piranda, J. (1990). “Localization methods for parameter updating of finite element models in elastodynamics.” Proc. 8th International Conf., Kissimmee, Fla, 579–585.
Messina, A., Willams, E. J., and Contursi, T. (1998). “Structural damage detection by a sensitivity and statistical-based method.” J. Sound Vib., 216(5), 791–808.
Miller, A. (2002). Subset selection in regression, 2nd Ed., CRC Press, Boca Raton, Fla.
Natke, H. G., and Cempel, C. (1997). Model-aided diagnosis of mechanical systems, Springer, Berlin.
Pothisiri, T., and Hjelmstad, K. D. (2003). “Structural damage detection and assessment from modal response.” J. Eng. Mech., 129(2), 135–145.
Ricles, J. M., and Kosmatka, J. B. (1992). “Damage detection in elastic structures using vibratory residual forces and weighted sensitivity.” AIAA J., 130(9), 2310–2316.
Shi, Z. Y., Law, S. S., and Zhang, L. M. (2000). “Damage localization by directly using incomplete mode shapes.” J. Eng. Mech., 126(6), 656–660.
Sohn, H., and Law, K. H. (1997). “A Baysian probabilistic approach for structure damage detection.” Earthquake Eng. Struct. Dyn., 26, 1259–1281.
Yeo, I., Shin, S., Lee, H. S., and Chang, S. P. (2000). “Statistical damage assessment of framed structures from static responses.” J. Eng. Mech., 126(4), 414–421.
Zimmerman, D. C., Kim, H. M., Bartkowicz, T. J., and Kaouk, M. (2001). “Damage detection using expanded dynamic residuals.” J. Dyn. Syst., Meas., Control, 123, 699–705.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Apr 9, 2003
Accepted: Nov 9, 2004
Published online: Jul 1, 2005
Published in print: Jul 2005
Notes
Note. Associate Editor: Arif Masud
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.