TECHNICAL PAPERS
Aug 16, 2004

Dimensional Analysis of Bilinear Oscillators under Pulse-Type Excitations

This article is a reply.
VIEW THE ORIGINAL ARTICLE
This article has a reply.
VIEW THE REPLY
Publication: Journal of Engineering Mechanics
Volume 130, Issue 9

Abstract

In this paper the response of a bilinear oscillator subjected to pulse-type motions is revisited with dimensional analysis. Using Buckingham’s Π theorem the number of variables in the response analysis is reduced from six (6) to four (4). When the response is presented in terms of dimensionless Π terms remarkable order emerges. It is shown that for a given value of dimensionless strength and dimensionless yield displacement, the response (relative dimensionless displacements and dimensionless base shears) is self-similar regardless of the intensity and duration of the pulse excitation. These self-similar solutions scale better with the peak pulse acceleration rather than with the peak pulse velocity, indicating that peak pulse acceleration is a superior intensity measure of the induced shaking. Most importantly, the paper demonstrates that for relatively small values of strength (larger values of ductility) the value of the normalized yield displacement is immaterial in the response, a finding that shows that the response of the bilinear single-degree-of-freedom oscillator exhibits a complete similarity (similarity of the first kind) in the normalized yield displacement. This finding implies that under a strong earthquake an isolated bridge will exhibit the same maximum displacement regardless if it is supported on lead-rubber bearings or friction pendulum bearings that exhibit the same strength and offer the same isolation period.

Get full access to this article

View all available purchase options and get full access to this article.

References

American Association of State Highway and Transportation Officials (AASHTO). (1999). Guide specifications for seismic isolation design, Washington, D.C.
Barenblatt, G. I. (1996). Scaling, self-similarity, and intermediate asymptotics, Cambridge University Press, Cambridge, U.K.
Black, C. J., Makris, N., and Aiken, I. D. (2002). “Component testing, stability analysis and characterization of buckling restrained braces.” Technical Rep. No. PEER 2002/08, Pacific Earthquake Engineering Research Center, University of California at Berkeley, Berkeley, Calif.
Chang, S. P., Makris, N., Whittaker, A. S., and Thompson, A. C. T.(2002). “Experimental and analytical studies on the performance of hybrid isolation systems.” Earthquake Eng. Struct. Dyn., 31, 421–443.
DebChaudhury, A.(1985). “Periodic response of yielding oscillators.” J. Eng. Mech., 111(8), 977–994.
Federal Emergency Management Agency (FEMA). (1997). NEHRP guidelines for the seismic rehabilitation of buildings, Washington, D.C.
Housner, G. W., and Hudson, D. E. (1959). Applied mechanics/dynamics, Van Nostrand, Princeton, N.J.
International Conference of Building Officials (ICBO). (2000). Seismic design of buildings and bridges, Engineering Press, Austin, Tex.
Iwan, W. D., and Gates, N. C.(1979). “Estimating earthquake response of simple hysteretic structures.” J. Eng. Mech. Div., 105(3), 391–405.
Kelly, M. J. (1997). Earthquake-resistant design with rubber, Springer, New York.
Langhaar, H. L. (1951). Dimensional analysis and theory of models, Wiley, New York.
Makris, N., and Black, C. J.(2004a). “Dimensional analysis of rigid-plastic and elastoplastic structures under pulse-type excitations.” J. Eng. Mech., 130(9), 1006–1018.
Makris, N., and Black, C. J.(2004b). “Evaluation of peak ground velocity as a “good” intensity measure for near-source ground motions.” J. Eng. Mech., 130(9), 1032–1044.
Makris, N., and Chang, S.(2000). “Effect of viscous, viscoplastic and friction damping on the response of seismic isolated structures.” Earthquake Eng. Struct. Dyn., 29, 85–107.
Miranda, E., and Ruiz-Garcia, J.(2002). “Evaluation of approximate methods to estimate maximum inelastic displacement demands.” Earthquake Eng. Struct. Dyn.31(3), 539–560.
Mohka, A., Constantinou, M. C., and Reinhorn, A. M. (1998). “Teflon bearings in aseismic base isolation: Experimental studies and mathematical modeling.” Technical Rep. NCEER 88-0038, SUNY, Buffalo, N.Y.
Schlichting, H. (1979). Boundary-layer theory, McGraw Hill, New York.
Skinner, R. I., Robinson, W. H., and McVerry, G. H. (1993). Seismic isolation, Wiley, Chichester, U.K.
Wen, Y.-K.(1975). “Approximate method for nonlinear random vibration.” J. Eng. Mech. Div.,101(4), 389–401.
Wen, Y.-K.(1976). “Method for random vibration of hysteretic systems.” J. Eng. Mech. Div., 102(2), 249–263.

Information & Authors

Information

Published In

Go to Journal of Engineering Mechanics
Journal of Engineering Mechanics
Volume 130Issue 9September 2004
Pages: 1019 - 1031

History

Received: Jan 24, 2003
Accepted: Mar 5, 2004
Published online: Aug 16, 2004
Published in print: Sep 2004

Permissions

Request permissions for this article.

Authors

Affiliations

Nicos Makris
Professor, Dept. of Civil Engineering, Univ. of Patras, Patras GR-26500, Greece; on leave from Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, CA 94720.
Cameron J. Black
PhD Candidate, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, CA 94720.

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share