Adaptive Feedback–Feedforward Control of Building Structures
Publication: Journal of Engineering Mechanics
Volume 130, Issue 7
Abstract
This paper proposes a combined feedback–feedforward control algorithm for reducing structural response of buildings to seismic excitations. The controller contains both feedback and feedforward components. The feedback component is assumed to be the same as that found from traditional linear quadratic regulator design. The feedforward component is obtained by estimating the external excitation as a series of step functions at each time increment. This feedforward gain varies with the duration of the step function used for estimation and converges as the time duration increases. Thus, a finite number of precalculated gains can be used to represent the potential feedforward gain profile. At any instant in time, the excitation is measured and by using the past measurements, the most effective feedforward gain for the recorded excitation values can be selected from the set of precalculated gains. This value is used as the feedforward gain for the current time step. Numerical examples are presented to show the effectiveness of this adaptive control scheme. The effects of varying the control objectives, the updating time for the feedforward gain, and the number and location of actuators are studied.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdel-Rohman, M., Quintanan, V. H., and Leipholz, H. H.(1980). “Optimal control of civil engineering structures.” J. Eng. Mech., 106(1), 57–73.
Antsaklis, P. J., and Michel, A. N. (1997). Linear systems, McGraw-Hill, New York.
Ascher, U. M., and Petzold, L. R. (1998). Computer method for ordinary differential equation & differential—Algebraic equations, Society for Industrial & Applied Mathematics, Philadelphia.
Brown, A. S., Ankireddi, S., and Yang, H. T. Y.(1999). “Actuator and sensor placement for multiobjective control of structures.” J. Struct. Eng., 125(7), 757–765.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures, McGraw–Hill, New York.
Dorato, P., Abdallah, C., and Cerone, V. (1995). Linear-Quadratic control, an introduction, Prentice-Hall, Englewood Cliffs, N.J.
Lasiecka, I., and Triggiani, R. (1991). Differential and algebraic Riccati equations with application to boundary/point control problems: Continuous theory and approximation theory, Springer, Berlin.
Ma, T. W. (2003). “Adaptive feedback-feedforward control and sensor fault accommodation via neural networks for seismically loaded infrastructures.” PhD thesis, Univ. of California at Santa Barbara, Santa Barbara, Calif.
Soong, T. T. (1990). Active structural control: Theory and practice, Longman’s, New York.
Spencer, B. F., Jr., and Sain, M. K.(1997). “Controlling buildings: A new frontier in feedback.” IEEE Control Syst. Mag., 17(6), 19–35.
Suhardjo, J., Spencer, B. F., Jr., and Sain, M. K.(1990). “Feedback-feedforward control of structures under seismic excitation.” Struct. Safety, 8(1–4), 69–89.
Yang, J. N.(1975). “Application of optimal control theory to civil engineering structures.” J. Eng. Mech. Div., 101(6), 819–838.
Yang, J. N., Akbarpour, A., and Ghaemmaghami, P.(1987). “New control algorithms for structural control.” J. Eng. Mech., 113(9), 1369–1386.
Yang, J. N., Li, Z., and Vongchavalitkul, S.(1994). “Stochastic hybrid control of hysteretic structures.” J. Prob. Eng. Mech., 9, 125–133.
Yang, H. T. Y., Liaw, D. G., Hsu, D. S., and Fu, H. C.(1993). “Simple model for optimal control of tall buildings.” J. Struct. Eng., 119(3), 902–919.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jan 29, 2003
Accepted: Dec 23, 2003
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.