Damage Detection Utilizing the Damage Index Method to a Benchmark Structure
Publication: Journal of Engineering Mechanics
Volume 130, Issue 2
Abstract
This paper addresses the first generation benchmark problem on structural health monitoring developed by the ASCE Task Group on Structural Health Monitoring. The focus of the problem is a four-story model of an existing physical model at the University of British Columbia where simulated data are used for the system identification. Modal parameters were extracted using the frequency domain decomposition method. Rather than relying on data from the undamaged structure, a new proposed methodology based on ratios between stiffness and mass values from the eigenvalue problem is presented to identify the undamaged state of the structure. Once the structural identification is complete, the damage index method is used to detect the location and severity of damage. By not relying on undamaged structure information, this approach may be applicable to existing structures that may already incorporate some amount of damage.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alampalli, S., Fu, G., and Dillon, E.(1997). “Signal versus noise in damage detection by experimental modal analysis.” J. Struct. Eng., 123(2), 237–245.
Biswas, M., Pandey, A. K., and Sammam, M. M.(1990). “Diagnostic experimental spectral/modal analysis of a highway bridge.” Int. J. Anal. Exp. Modal Anal., 5(1), 33–42.
Black, C. J., and Ventura, C. E. (1998). “Blind test on damage detection of a steel frame structure.” Proc., 16th Int. Modal Analysis Conf.
Brinker, R., Zhang, L., and Andersen, P. (2000). “Modal identification from ambient responses using frequency domain decomposition.” Proc., 18th Int. Modal Analysis Conf., 625–630.
Chang, K. C., Shen, Z., and Lee, G. C. (1993). “Modal analysis technique for bridge damage detection.” Structural engineering in natural hazards mitigation, ASCE, Reston, Va., 1083–1088.
Chang, T. Y. P., Chang, C. C., and Xu, Y. G. (1999). “Updating structural parameters: An adaptive neural network approach.” Proc., 2nd Int. Workshop on Structural Health Monitoring, F.-K. Chang, ed., Stanford University Press, Stanford, Calif., 379–389.
Dyke, S. J. (2001). “Structural Health Monitoring Committee.” 〈http://wusceel.cive.wustl.edu/asce.shm/default.htm〉 (Nov. 23, 2002).
Elkordy, M. F., Chang, K. C., and Lee, G. C.(1994). “Application of neural networks in vibrational signature analysis.” J. Eng. Mech., 120(2), 250–265.
Farrar, C. R., and Jauregui, D. A.(1998). “Comparative study of damage identification algorithms applied to a bridge: 1. Experiment.” Smart Mater. Struct., 7, 704–719.
Hearn, G., and Testa, R. B.(1991). “Modal analysis for damage detection in structures.” J. Struct. Eng., 11(10), 3042–3063.
Hou, Z., and Noori, M. (1999). “Application of wavelet analysis for structural health monitoring.” Proc., 2nd Int. Workshop on Structural Health Monitoring, F.-K. Chang, ed., Stanford University Press, Stanford, Calif., 946–955.
Johnson, E. A., Lam, H. F., Katafygiotis, L. S., and Beck, J. L. (2000). “A benchmark problem for structural health monitoring and damage detection.” Proc., 14th ASCE Engineering Mechanics Conf. (EM2000) (CD-Rom), Reston, Va., paper EAJOHN.PDF.
Loh, C.-H., and Huang, C.-C. (1999). “Damage identification of multi-story steel frames using neural networks.” Proc., 2nd Int. Workshop on Structural Health Monitoring, F.-K. Chang, ed., Stanford University, Stanford, Calif. 390–399.
Mazurek, D. F., and DeWolf, J. T.(1990). “Experimental study of bridge monitoring technique.” J. Struct. Eng., 116(9), 2532–2549.
Nemat-Nasser, S. (2001). “Session: Benchmark problems in SHM.” Proc., ASME-ASCE Joint Mechanics and Materials Conf., Reston, Va.
Pandey, A. K., and Biswas, M.(1991). “Damage detection in structures using changes in flexibility.” J. Sound Vib., 169(1), 3–17.
Stubbs, N., and Kim, J.-T.(1996). “Damage localization in structures without baseline modal parameters.” AIAA J., 34(8), 1644–1649.
Stubbs, N., Kim, J.-T., and Tapole, K. (1992). “An efficient and robust algorithm for damage localization in offshore platforms.” ASCE 10th Structures Congress, Reston, Va.
Stubbs, N., and Osegueda, R.(1990). “Global non-destructive damage evaluation in solids.” Int. J. Anal. Exp. Modal Anal., 5(2), 67–79.
Tassoulas, J. L. (2000). “Session: Structural health monitoring benchmark problem.” Proc., Engineering Mechanics Conf. (EM2000), ASCE, Reston, Va.
Vincent, H. T., Hu, S.-L. J., and Hou, Z. (1999). “Damage detection using empirical mode decomposition method and wavelet analysis.” Proc., 2nd Int. Workshop on Structural Health Monitoring, F.-K. Chang, ed., Stanford University Press, Stanford, Calif., 891–900.
Wolf, T., and Richardson, M. (1989). “Fault detection in structures from changes in their modal properties.” Proc., 7th Int. Modal Analysis Conf., 87–94.
Zhang, Z., and Aktan, H. M. (1995). “The damage indices for constructed facilities.” Proc., Int. Modal Analysis Conf.
Zhao, J., and DeWolf, J. T.(1999). “Sensitivity study for vibrational parameters used in damage detection.” J. Struct. Eng., 125(4), 410–416.
Zhao, J., Ivan, J. N., and DeWolf, J. T.(1998). “Structural damage detection using artificial neural networks.” J. Infrastruct. Syst., 4(3), 93–101.
Zimmerman, D. C., and Kauk, M.(1994). “Structural damage detection using a minimum rank update theory.” J. Sound Vib., 116(2), 221–231.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Jan 29, 2002
Accepted: Jun 9, 2003
Published online: Jan 16, 2004
Published in print: Feb 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.