Bayesian Analysis of the Phase II IASC–ASCE Structural Health Monitoring Experimental Benchmark Data
Publication: Journal of Engineering Mechanics
Volume 130, Issue 10
Abstract
A two-step probabilistic structural health monitoring approach is used to analyze the Phase II experimental benchmark studies sponsored by the IASC–ASCE Task Group on Structural Health Monitoring. This study involves damage detection and assessment of the test structure using experimental data generated by hammer impact and ambient vibrations. The two-step approach involves modal identification followed by damage assessment using the pre- and postdamage modal parameters based on the Bayesian updating methodology. An Expectation–Maximization algorithm is proposed to find the most probable values of the parameters. It is shown that the brace damage can be successfully detected and assessed from either the hammer or ambient vibration data. The connection damage is much more difficult to reliably detect and assess because the identified modal parameters are less sensitive to connection damage, allowing the modeling errors to have more influence on the results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Beck, J.L. ( 1978). “Determining models of structures from earthquake records.” Technical Rep. EERL 78-01, Earthquake Engineering Research Laboratory, California Institute of Technology, Pasadena, Calif. 〈http://caltecheerl.library.caltech.edu/archive/00000183/〉
2.
Beck, J.L. ( 1996). “System identification methods applied to measured seismic response.” Proc., 11th World Conf. Earthquake Engineering, Acapulco, Mexico.
3.
Beck, J. L., Au, S. K., and Vanik, M. W. (2001). “Monitoring structural health using a probabilistic measure.” Comput. Aided Civ. Infrastruct. Eng., 16, 1–11.
4.
Beck J. L., and Katafygiotis, L. S. (1998). “Updating models and their uncertainties. Part 1: Bayesian statistical framework.” J. Eng. Mech., 124(4), 455–461.
5.
Beck, J.L., May, B.S., and Polidori, D.C. ( 1994). “Determination of modal parameters from ambient vibration data for structural health monitoring.” Proc., Ist World Conf. on Structural Control, Pasadena, Calif., TA3:3–TA3:12.
6.
Bernal, D. (2002). “Load vectors for damage localization.” J. Eng. Mech., 128(1), 7–14.
7.
Bernal, D., Dyke, S.J., Beck, J.L., and Lam, H.F. ( 2002). “Phase II of the ASCE benchmark study on structural health monitoring.” Proc., 15th Engineering Mechanics Division Conf., ASCE, Reston, Va.
8.
, F. Casciati, ed. ( 2002). Proc., 3rd World Conf. on Structural Control, Como, Italy.
9.
, F. K. Chang, ed. ( 2001). Proc., of 3rd Int. Workshop on Structural Health Monitoring, Stanford, Calif.
10.
Ching, J., and Beck, J.L. ( 2003c). “Detecting beam-column connection failures in ASCE Phase II simulated benchmark studies using a two-step Bayesian structural health monitoring approach.” Proc., 9th Int. Conf. on Applications of Statistics and Probability in Civil Engineering, San Francisco.
11.
Ching, J., and Beck, J.L. ( 2003b). “Two-stage Bayesian structural health monitoring approach for Phase II ASCE benchmark studies.” Proc., 21st Int. Modal Analysis Conf., Orlando, Fla.
12.
Ching, J., and Beck, J.L. ( 2003a). “Two-step Bayesian structural health monitoring approach for IASC–ASCE Phase II simulated and experimental benchmark studies.” Technical Rep. No. EERL 2003-02, Earthquake Engineering Research Laboratory, California Institute of Technology, Pasadena, Calif. 〈http://caltecheerl.library.caltech.edu/archive/00000352/〉
13.
Cox, R.T. ( 1961). The algebra of probable inference, Johns Hopkins University Press, Baltimore.
14.
Dyke, S.J., Bernal, D., Beck, J.L., and Ventura, C. ( 2001). “An experimental benchmark problem in structural health monitoring.” Proc., 3rd Int. Workshop on Structural Health Monitoring, Stanford, Calif.
15.
Dyke, S.J., Bernal, D., Beck, J.L., and Ventura, C. ( 2003). “Experimental phase of the structural health monitoring benchmark problem.” Proc., 16th Engineering Mechanics Conf., ASCE, Reston, Va.
16.
Hjelmstad, K. D., and Shin, S. (1997). “Damage detection and assessment of structures from static response.” J. Eng. Mech., 123(6), 568–576.
17.
Jaynes, E. T. (1957). “Information theory and statistical mechanics.” Phys. Rev., 106, 620–630;
Also, R. D. Rosenkrantz, ed. ( 1982). E. T. Jaynes: Papers on probability, statistics and statistical physics, Reidel, Dordrecht, Holland.
18.
Johnson, E. A., Lam, H. F., Katafygiotis, L. S., and Beck, J. L. (2004). “Phase I IASC–ASCE structural health monitoring benchmark problem using simulated data.” J. Eng. Mech., 130(1), 3–15.
19.
, H. G. Natke, and, J. T.P. Yao, eds. ( 1988). Proc., of Workshop on Structural Safety Evaluation Based on System Identification Approaches, Vieweg, Wiesbaden, Germany.
20.
Papadimitriou, C., Beck, J. L., and Katafygiotis, L. S. (1997). “Asymptotic expansions for reliabilities and moments of uncertain dynamic systems.” J. Eng. Mech., 123(12), 1219–1229.
21.
Sanayei, M., McClain, J. A. S., Wadia-Fascetti, S., and Santini, E. M. (1999). “Parameter estimation incorporating modal data and boundary conditions.” J. Struct. Eng., 125(9), 1048–1055.
22.
Shumway, R. H., and Stoffer, D. S. (1982). “An approach to time series smoothing and forecasting using the EM algorithm.” J. Time Ser. Anal., 4, 253–263.
23.
Vanik, M.W. ( 1997). “A Bayesian probabilistic approach to structural health monitoring.” Technical Rep. No. EERL 97-07, Earthquake Engineering Research Laboratory, California Institute of Technology, Pasadena, Calif. 〈http://caltecheerl.library.caltech.edu/archive/00000049/〉
24.
Vanik, M. W., Beck, J. L., and Au, S. K. (2000). “Bayesian probabilistic approach to structural health monitoring.” J. Eng. Mech., 126(7), 738–745.
25.
Yuen, K. V., Au, S. K., and Beck, J. L. (2004). “Two-stage structural health monitoring approach for Phase I benchmark studies.” J. Eng. Mech., 130(1), 16–33.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Oct 1, 2004
Published in print: Oct 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.