Analysis of Heterogeneous Composites Based on Moving-Window Techniques
Publication: Journal of Engineering Mechanics
Volume 129, Issue 9
Abstract
Moving-window micromechanics techniques are emerging as a useful tool for characterizing random composites, i.e., those with spatially random microstructures, in terms of local material property fields. These material property fields represent an approximate constitutive model for local material response. In this work, elastic property fields for randomly generated composite materials are estimated using a moving-window technique in combination with three micromechanical models, Mori-Tanaka, the generalized method of cells, and a brute-force finite element analysis. The first two methods make predictions of local properties based on small areas of the full sample. The brute-force finite element method performs its initial analysis on the full microstructure. Using the finite element results as the baseline solution, the fields developed from the methods are compared. Results illustrate the differences between the three methods and highlight the strong influence of window size on the analysis. Two criteria are suggested for further study of appropriate window size: A comparison of the correlation areas of the fields, which suggests an upper bound, and the analysis of a single fiber problem with known elasticity solution, which examines a potential lower bound. All of the techniques are demonstrated by application to numerically generated composite microstructures.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aboudi, J.(1989). “Micromechanical analysis of composites by the method of cells.” Appl. Mech. Rev., 42, 192.
Baxter, S. C., and Graham, L. L.(2000). “Characterization of random composites using a moving window technique.” J. Eng. Mech., 126(4), 389–404.
Baxter, S. C., Hossain, M. I., and Graham, L. L. (2001). “Micromechanics based random material property fields for particulate reinforced composites.” Int. J. Solids Struct., in press.
Bendat, J. S., and Piersol, A. G. (1986). Random data: Analysis and measurement procedures, Wiley, New York.
Benveniste, Y.(1987). “A new approach to the application of Mori-Tanaka’s theory in composite materials.” Mech. Mater., 6, 147–157.
Frantziskonis, G. N.(1998). “Stochastic modeling of heterogeneous materials—A process for the analysis and evaluation of alternative formulations.” Mech. Mater., 27, 165–175.
Gibiansky, L. V., and Torquato, S.(1995). “Geometrical-parameter bounds on the effective moduli of composites.” J. Mech. Phys. Solids, 43, 1587–1613.
Graham, L. L., and Baxter, S. C. (1998). “Stochastic finite element analysis of composite structures with random imperfections.” Stochastic structural dynamics, B. F. Spencer, Jr. and E. A. Johnson, eds., Univ. of Notre Dame, Balkema, Rotterdam, 159–164.
Graham, L. L., and Baxter, S. C. (2001), “Simulation of local material properties based on moving-window GMC.” J. Prob. Eng., in press.
Hazanov, S., and Huet, C.(1994). “Order relationships for boundary conditions effect in heterogeneous bodies smaller than the representative volume.” J. Mech. Phys. Solids, 42, 1995–2011.
Huyse, L., and Maes, M. A.(2001). “Random field modeling of elastic properties using homogenization.” J. Eng. Mech., 127(1), 27–36.
Lissenden, C. J., and Herakovich, C. T. (1992). “Comparison of micromechanical models for elastic properties.” Engineering, Construction and Operations in SPACE III, (W. Z. Sadeh, S. Sture, and R. J. Miller, eds., Space), Proc. 3rd Int. Conf., ASCE, New York, 1309–1322.
Lu, B., and Torquato, S.(1990). “Local volume fraction fluctuations in heterogeneous media.” J. Chem. Phys., 93(5), 3452–3459.
Mori, T., and Tanaka, K.(1973). “Average stress in matrix and average elastic energy of material with misfitting inclusions.” Acta Metall., 21, 571–574.
Mullen, R. L., Ballarini, R., Yin, Y., and Heuer, A. H.(1997). “Monte Carlo simulation of effective elastic constants of polycrystalline thin films.” Acta Mater., 45(6), 2247–2255.
Ostoja-Starzewski, M.(1994). “Micromechanics as a basis of continuum random fields.” Appl. Mech. Rev., 47(1), S221–S230.
Ostoja-Starzewski, M., and Wang, X.(1999). “Stochastic finite elements as a bridge between random material microstructure and global response.” Comput. Methods Appl. Mech. Eng., 168, 35–49.
Paley, M., and Aboudi, J.(1992). “Micromechanical analysis of composites by the generalized cells model.” Mech. Mater., 14, 127–139.
Papathanasiou, T. D., and Lee, P. D.(1997). “Morphological effects on the transverse permeability of arrays of aligned fibers.” Polym. Compos., 18(2), 242–253.
Roberts, A. P., and Knackstedt, M. A.(1996). “Structure-property correlations in model composite materials.” Phys. Rev. E, 54(3), 2313–2328.
Roberts, A. P., and Teubner, M.(1995). “Transport properties of heterogeneous materials derived from gaussian random fields: Bounds and simulation.” Phys. Rev. E, 51(5), 4141–4154.
Rowatt, J. D., and Spanos, P. D.(1998). “Markov chain models for life prediction of composite laminates.” Struct. Safety, 20, 117–135.
Tang, W. H., and Gilbert, R. B.(1989). “Statistics of spatial average in a random two-state medium.” Struct. Safety, 6, 271–282.
Timoshenko, S., and Goodier, J. N. (1951). Theory of elasticity, McGraw-Hill, New York.
Vanmarcke, E. (1983). Random Fields, MIT Press, Cambridge, Mass.
Everett, R. K., and Chu, J. H.(1993). “Modeling of non-uniform composite microstructures.” J. Compos. Mater., 27(11), 1128.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Aug 30, 2001
Accepted: Feb 14, 2003
Published online: Aug 15, 2003
Published in print: Sep 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.