Constructing Second-Order Models of Mechanical Systems from Identified State Space Realizations. Part I: Theoretical Discussions
This article has a reply.
VIEW THE REPLYPublication: Journal of Engineering Mechanics
Volume 129, Issue 5
Abstract
This paper and its companion study constitute a two-part attempt at providing a common framework for some methodologies used in obtaining physical parameters of mechanical systems from identified state space models. In the theoretical part, the authors discuss the basic ideas and formulations involved in such algorithms. It is argued that the problem of extracting the physical matrices of the underlying second-order model is equivalent to the identification of certain linear transformation matrices, and that each of the evaluated approaches differs from the others mainly in the particular physically meaningful state space model it chooses as its objective. The choice of this state space model, and the formulations employed therein, define the applicability of the methodologies in terms of the number of sensors and/or actuators they require for a complete identification.
Get full access to this article
View all available purchase options and get full access to this article.
References
Agbabian, M. S., Masri, S. F., Miller, R. K., and Caughey, T. K.(1991). “System identification approach to detection of structural changes.” J. Eng. Mech., 117(2), 370–390.
Alvin, K. F. (1993). “Second-order structural identification via state space based system realizations.” PhD thesis, Univ. of Colorado, Boulder, Colo.
Alvin, K. F., and Park, K. C.(1994). “Second-order structural identification procedure via state-space-based system identification.” AIAA J., 32(2), 397–406.
Alvin, K. F., Peterson, L. D., and Park, K. C.(1995). “Method for determining minimum-order mass and stiffness matrices from modal test data.” AIAA J., 33(1), 128–135.
Balmès, E.(1997). “New results on the identification of normal modes from experimental complex modes.” Mech. Syst. Signal Process., 11(2), 229–243.
Baruch, M.(1982). “Optimal correction of mass and stiffness matrices using measured modes.” AIAA J., 20(11), 1623–1626.
Beck, J. L., and Katafygiotis, L. S.(1998). “Updating models and their uncertainties. Part I: Bayesian statistical framework.” J. Eng. Mech., 124(4), 455–461.
Berman, A.(1979). “Mass matrix correction using an incomplete set of measured modes.” AIAA J., 17(10), 1147–1148.
Bernal, D., and Gunes, B. (2000). “Extraction of second order system matrices from state space realizations.” Proc., 14th ASCE Engineering Mechanics Conf., ASCE, Austin, Tex.
Chen, S. Y., Ju, M. S., and Tsuei, Y. G.(1996). “Extraction of normal modes for highly coupled incomplete systems with general damping.” Mech. Syst. Signal Process., 10(1), 93–106.
De Angelis, M., Luş, H., Betti, R., and Longman, R. W.(2002). “Extracting physical parameters of mechanical models from identified state space representations.” ASME Trans. J. Appl. Mech., 69, 617–625.
Ewins, D. J. (1984). Modal testing: Theory and practice, Letchworth, Research Studies Press, Hertfordshire, England.
Ibrahim, S. R.(1977). “Random decrement technique for modal identification of structures.” J. Spacecr. Rockets, 14(11), 696–700.
Ibrahim, S. R.(1983a). “Computation of normal modes from identified complex modes.” AIAA J., 21(3), 446–451.
Ibrahim, S. R.(1983b). “Dynamic modeling of structures from measured complex modes.” AIAA J., 21(6), 898–901.
Ibrahim, S. R., and Mikulcik, E. C.(1977). “A method for the direct identification of vibration parameters from the free response.” Shock Vibration Bull., 47(4), 183–198.
Imregun, M., and Ewins, D. J. (1993). “Realisation of complex modeshapes.” Proc., 11th Int. Modal Analysis Conf., SEM, Kissimme, Fla., 1303–1309.
Juang, J. N., and Pappa, R. S.(1985). “An eigensystem realization algorithm for model parameter identification and model reduction.” J. Guid. Control Dyn., 8(5), 620–627.
Juang, J. N., Cooper, J. E., and Wright, J. R.(1988). “An eigensystem realization algorithm using data correlations (ERA/DC) for model parameter identification.” Control Theory Adv. Technol., 4(1), 5–14.
Juang, J. N., Phan, M., Horta, L. G., and Longman, R. W.(1993). “Identification of observer/kalman filter markov parameters: Theory and experiments.” J. Guid. Control Dyn., 16(2), 320–329.
Lancester, P., and Maroulas, J.(1987). “Inverse eigenvalue problems for damped vibrating systems.” J. Math. Anal. Appl., 127, 238–261.
Luş, H. (2001). “Control theory based system identification.” PhD thesis, Columbia Univ., New York.
Luş, H., Betti, R., and Longman, R. W.(1999). “Identification of linear structural systems using earthquake-induced vibration data.” Earthquake Eng. Struct. Dyn., 28, 1449–1467.
Luş, H., Betti, R., and Longman, R. W.(2002a). “Obtaining refined first order predictive models of linear structural systems.” Earthquake Eng. Struct. Dyn., 31, 1413–1440.
Luş, H., De Angelis, M., Betti, R., and Longman, R. W.(2003). “Constructing second-order models of mechanical systems from identified state space realizations. Part II: Numerical investigations.” J. Eng. Mech., 129(5), 489–501.
Luş, H., De Angelis, M., Betti, R., and Longman, R. W. (2002b). “Identifying the physical properties of mechanical systems using vibration measurements.” Rep., Dept. of Civil Engineering and Engineering Mechanics, Columbia Univ., New York.
Mottershead, J. E., and Friswell, M. I.(1993). “Model updating in structural dynamics: A survey.” J. Sound Vib., 165(2), 347–375.
Sestieri, A., and Ibrahim, S. R.(1994). “Analysis of errors and approximations in the use of modal coordinates.” J. Sound Vib., 177(2), 145–157.
Smyth, A. W., Masri, S. F., Caughey, T. K., and Hunter, N. F.(2000). “Surveillance of intricate mechanical systems on the basis of vibration signature analysis.” ASME Trans. J. Appl. Mech., 67(3), 540–551.
Starek, L., and Inman, D. J.(1997). “A symmetric inverse vibration problem for nonproportional underdamped systems.” ASME Trans. J. Appl. Mech., 64, 601–605.
Starek, L., and Inman, D. J.(2001). “Symmetric inverse eigenvalue vibration problem and its applications.” Mech. Syst. Signal Process., 15(1), 11–29.
Tseng, D. H., Longman, R. W., and Juang, J. N.(1994a). “Identification of gyroscopic and nongyroscopic second order mechanical systems including repeated problems.” Adv. Astronaut. Sci., 87, 145–165.
Tseng, D. H., Longman, R. W., and Juang, J. N.(1994b). “Identification of the structure of the damping matrix in second order mechanical systems.” Adv. Astronaut. Sci., 87, 166–190.
Vold, H., Kundrat, J., Rocklin, G. T., and Russell, R.(1982). “A multiple-input modal estimation algorithm for mini computers.” SAE Trans.,91(1), 815–821.
Yang, C. D., and Yeh, F. B.(1990). “Identification, reduction, and refinement of model parameters by the eigensystem realization algorithm.” J. Guid. Control Dyn., 13(6), 1051–1059.
Zhang, Q., and Lallement, G.(1987). “Comparison of normal eigenmodes calculation methods based on identified complex eigenmodes.” J. Spacecr. Rockets, 24, 69–73.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 129 • Issue 5 • May 2003
Pages: 477 - 488
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 10, 2001
Accepted: Oct 17, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.