Updating Properties of Nonlinear Dynamical Systems with Uncertain Input
Publication: Journal of Engineering Mechanics
Volume 129, Issue 1
Abstract
A spectral density approach for the identification of linear systems is extended to nonlinear dynamical systems using only incomplete noisy response measurements. A stochastic model is used for the uncertain input and a Bayesian probabilistic approach is used to quantify the uncertainties in the model parameters. The proposed spectral-based approach utilizes important statistical properties of the Fast Fourier Transform and their robustness with respect to the probability distribution of the response signal in order to calculate the updated probability density function for the parameters of a nonlinear model conditional on the measured response. This probabilistic approach is well suited for the identification of nonlinear systems and does not require huge amounts of dynamic data. The formulation is first presented for single-degree-of-freedom systems and then for multiple-degree-of freedom systems. Examples using simulated data for a Duffing oscillator, an elastoplastic system and a four-story inelastic structure are presented to illustrate the proposed approach.
Get full access to this article
View all available purchase options and get full access to this article.
References
Beck, J. L. (1990). “Statistical system identification of structures.” Structural Safety and Reliability, ASCE, New York, 1395–1402.
Beck, J. L., and Au, S. K.(2002). “Bayesian updating of structural models and reliability using Markov Chain Monte Carlo simulation.” J. Eng. Mech., 128(4), 380–391.
Beck, J. L., and Katafygiotis, L. S.(1998). “Updating models and their uncertainties. I: Bayesian statistical framework.” J. Eng. Mech., 124(4), 455–461.
Beck, J. L., May, B. S., and Polidori, D. C. (1994). “Determination of modal parameters from ambient vibration data for structural health monitoring.” Proc., 1st World Conf. on Structural Control, Pasadena, Calif., TA3:3–TA3:12, International Association of Structural Control.
Box, G. E. P., and Tiao, G. C. (1973). Bayesian Inference in Statistical Analysis. Addison-Wesley, Reading, Mass.
Brillinger, D. R.(1969). “Asymptotic properties of spectral estimates of second order.” Biometrika, 56(2), 375–390.
Clough, R. W., and Penzien, J. (1975). Dynamics of structures, McGraw-Hill, New York.
Gersch, W., Taoka, G. T., and Liu, R.(1976). “Structural system parameter estimation by two-stage least squares method.” J. Eng. Mech., 102(5), 883–899.
Hoshiya, M., and Saito, E.(1984). “Structural identification by extended Kalman filter.” J. Eng. Mech., 110(12), 1757–1770.
Housner, G. W., Bergman, L. A., Caughey, T. K., Chassiakos, A. G., Claus, R. O., Masri, S. F., Skelton, R. E., Soong, T. T., Spencer, B. F., and Yao, J. T. P. (1997). “Special issue on structural control: past, present, and future.” J. Eng. Mech., 123(9).
Iwan, W. D., and Lutes, L. D.(1968). “Response of the bilinear hysteretic system to stationary random excitation.” J. Acoust. Soc. Am., 43, 545–552.
Katafygiotis, L. S., Papadimitriou, C., and Lam, H. F.(1998). “A probabilistic approach to structural model updating.” Soil Dyn. Earthquake Eng., 17(7–8), 495–507.
Katafygiotis, L. S., and Yuen, K.-V.(2001). “Bayesian spectral density approach for modal updating using ambient data.” Earthquake Eng. Struct. Dyn., 30(8), 1103–1123.
Krishnaiah, P. R.(1976). “Some recent developments on complex multivariate distributions.” J. Multivariate Anal., 6, 1–30.
Loh, C.-H., and Tsaur, Y.-H.(1988). “Time domain estimation of structural parameters.” Eng. Struct., 10(2), 95–105.
Lutes, L. D., and Sarkani, S. (1997). Stochastic analysis of structural and mechanical vibrations, Prentice Hall, Englewood Cliffs, N.J.
MATLAB (1994). Matlab user’s guide, MathWorks, Inc., Natick, Mass.
Natke, H. G., and Yao, J. T. P. (1988). Proc., Workshop on Structural Safety Evaluation Based on System Identification Approaches, Vieweg and Sons, Wiesbaden.
Roberts, J. B., Dunne, J. F., and Debonos, A.(1995). “A spectral method for estimation for nonlinear system parameters from measured response.” Probab. Eng. Mech., 10(4), 199–207.
Roberts, J. B., and Spanos, P. D. (1990). Random vibration and statistical linearization, Wiley, New York.
Vanik, M. W., Beck, J. L., and Au, S. K.(2000). “A Bayesian probabilistic approach to structural health monitoring.” J. Eng. Mech., 126(7), 738–745.
Yaglom, A. M. (1987). Correlation theory of stationary and related random functions. Springer, New York.
Yajima, Y.(1989). “A central limit theorem of fourier transforms of strongly dependent stationary processes.” J. Time Ser. Anal., 10(4), 375–383.
Yuen, K.-V. (1999). “Structural modal identification using ambient dynamic data.” MPhil thesis, Tech. Rep., Hong Kong Univ. of Science and Technology, Hong Kong.
Yuen, K.-V., Beck, J. L., and Katafygiotis, L. S.(2002). “Probabilistic approach for modal identification using non-stationary noisy response measurements only.” Earthquake Eng. Struct. Dyn., 31(4), 1007–1023.
Yuen, K.-V., and Katafygiotis, L. S.(2001). “Bayesian time-domain approach for modal updating using ambient data.” Probab. Eng. Mech., 16(3), 219–231.
Yuen, K.-V., and Katafygiotis, L. S.(2002). “Bayesian modal updating using complete input and incomplete response noisy measurements.” J. Eng. Mech., 128(3), 340–350.
Yuen, K.-V., Katafygiotis, L. S., and Beck, J. L.(2002). “Spectral density estimation of stochastic vector processes.” Probab. Eng. Mech., 17(3), 265–272.
Zeldin, B. A., and Spanos, P. D.(1998). “Spectral identification of nonlinear structural systems.” J. Eng. Mech., 124(7), 728–733.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Oct 8, 2001
Accepted: May 20, 2002
Published online: Dec 13, 2002
Published in print: Jan 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.