Aging Approach to Water Effect on Alkali–Silica Reaction Degradation of Structures
Publication: Journal of Engineering Mechanics
Volume 129, Issue 1
Abstract
The maintenance of a considerable number of concrete structures the durability and serviceability of which are endangered by the alkali–silica reaction (ASR) requires a quantitative structural evaluation and prediction, in time and space, of the structural effects of ASR expansion. Considerable research effort has been dedicated to the mechanical modeling of ASR-induced concrete swelling. However, its predominant factor, the internal humidity, has not yet been clearly understood. Recent laboratory tests on the influence of humidity on ASR expansion allow us to better understand the swelling mechanisms. The aim of this paper is to discuss the role of water at both reaction and material level, to propose a comprehensive mechanical model for the material swelling with a hydrochemomechanical approach, and finally, to study structural effects of ASR by means of the new model. The proposed model adopts a two-stage mechanism for the swelling kinetics, consisting of the formation of an amorphous gel for which a characteristic time of reaction is identified and of the combination of important quantities of water by the gel. Because the combination of water shows an aging effect a second reaction with a characteristic time of aging is introduced. Furthermore, the initial phase of the material swelling is explained by the filling process of internal pores by the swollen gel. The model is verified by using experimental data. At a structural level, a characteristic ASR water diffusion length is proposed to evaluate the concrete surface delamination depth. Its range is calculated by means of an one-dimensional analysis of ASR swelling activated by water diffusion. As a case study a reactive retaining wall is analyzed with the new model integrated into a finite element scheme. The material degradation process and the structural responses are illustrated and discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Atkins, P. W. (1994). Physical chemistry, 5th Ed., Oxford University Press, Oxford, U.K.
Baroghel-Bouny, V., Mainguy, M., Lassabatere, T., and Coussy, O.(1999). “Characterization and identification of equilibrium and transfer moisture properties of ordinary and high-performance cementitious materials.” Cem. Concr. Res., 29(8), 1225–1238.
Bažant, Z. P., and Steffens, A.(2000). “Mathematical model for kinetics of alkali-silica reaction in concrete.” Cem. Concr. Res., 30(3), 419–428.
Bažant, Z. P., Zi, G., and Meyer, C.(2000). “Fracture mechanics of ASR in concretes with waste glass particles of different sizes.” J. Eng. Mech., 126(3), 226–232.
Bleszynski, R. F., and Thomas, M. D. A.(1998). “Microstructural studies of alkali-silica reaction in fly ash concretes immersed in alkaline solutions.” Adv. Cem. Based Mater., 7, 66–78.
Capra, B., and Bournazel, J.-P.(1998). “Modeling of induced mechanical effects of alkali-aggregate reactions.” Cem. Concr. Res., 28(2), 251–260.
Carlslaw, A. R., and Jaeger, C. J. (1960). Conduction of heat in solids, Oxford and Clarendon Press.
Coussy, O., and Ulm, F.-J. (2001). “Elements of durability mechanics of concrete structures.” Proc., 6th Int. Conf. Concreep6@MIT, Elsevier, New York, 393–409.
Dent Glaser, L. S., and Kataoka, N.(1981). “The chemistry of ‘alkali-aggregate’ reaction.” Cem. Concr. Res., 11(1), 1–9.
Diamond, S.(1997). “Alkali silica reactions—some paradoxes.” Cem. Concr. Compos., 19, 391–401.
Diamond, S., Barneyback, R. S., Jr., and Struble, L. J. (1981). “On the physics and chemistry of alkali-silica reactions.” Proc., 5th Conf. on Alkali-aggregate Reaction in Concrete, S252/22, 1–11.
Dron, R., and Brivot, F.(1992). “Thermodynamic and kinetic approach to the alkali-aggregate reaction. Part 1: concepts.” Cem. Concr. Res., 22(5), 941–948.
Huang, M., and Pietruszczak, S.(1999). “Modeling of thermomechanical effects of alkali-silica reaction.” J. Eng. Mech., 125(4), 476–485.
Jones, A. E. K., and Clark, L. A.(1998). “The effects of ASR on the properties of concrete and the implications for assessment.” Eng. Struct., 20(9), 785–791.
Larive, C. (1998). “Apports combinés de l’expérimentation et de la modélisation à la compréhension de l’alcali-réaction et de ses effets mécaniques.” Monograph LCPC, OA28, Laboratoire Central des Ponts et Chaussées, Paris (in French).
Lemarchand, E., and Dormieux, L. (2000). “A micromechanical approach to the modeling of swelling due to alkali-silica reaction.” Proc., 14th Eng. Mech. Conf., Austin, Tex.
Li, Z., Mu, B., and Peng, J.(2000). “Alkali-silica reaction of concrete with admixtures of concrete.” J. Eng. Mech., 126(3), 243–249.
Stanton, T. E.(1940). “Expansion of concrete through reaction between cement and aggregate.” Proc. Am. Soc. Civ. Eng., 66, 1781–1811.
Swamy, R. N. (1992). The alkali silica reaction in concrete, New York.
Swamy, R. N.(1997). “Assessment and rehabilitation of AAR-affected structures.” Cem. Concr. Compos., 19, 427–440.
Ulm, F.-J., and Coussy, O.(2001). “What is a ‘massive’ concrete structure at early-ages? Some dimensional arguments.” J. Eng. Mech., 127(5), 512–522.
Ulm, F.-J., Coussy, O., Li, K., and Larive, C.(2000). “Thermo-chemo-mechanics of ASR expansion in concrete structures.” J. Eng. Mech., 126(3), 233–242.
Willam, K.-J., and Warnke, E.-P. (1975). “Constitutive model for the triaxial behavior of concrete.” Int. Assn. Bri. Stru. Eng., 19, Zurich.
Xi, Y., Suwito, A., Meyer, C., and Jin, W. (1999). “Testing and modeling of alkali-silica reaction and the associated expansion of concrete.” Pijaudier-Cabot, Mechanics of quasi-brittle materials and structures, G. Pijaudier-Cabot, Z. Bittnar, and B. Gérard, eds., Hermes Science, Paris, 217–232.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Aug 16, 2001
Accepted: Feb 15, 2002
Published online: Dec 13, 2002
Published in print: Jan 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.