Postbuckling of Shear Deformable Laminated Cylindrical Shells
Publication: Journal of Engineering Mechanics
Volume 128, Issue 3
Abstract
A postbuckling analysis is presented for a shear deformable laminated cylindrical shell of finite length subjected to compressive axial loads. The governing equations are based on Reddy’s higher-order shear deformation shell theory with a von Kármán–Donnell type of kinematic nonlinearity. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of shear deformable laminated cylindrical shells under axial compression. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, unstiffened or stiffened, moderately thick, cross-ply laminated cylindrical shells. The effects of transverse shear deformation, shell geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are studied.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anastasiadis, J. S., Tabiei, A., and Simitses, G. J.(1994). “Instability of moderately thick, laminated, cylindrical shells under combined axial compression and pressure.” Composite Struct., 27(4), 367–378.
Batdorf, S. B. (1947). “A simplified method of elastic-stability analysis for thin cylindrical shells.” National Advisory Committee for Aeronautics Rep. TR-874, Washington, D.C.
Eslami, M. R., and Shariyat, M.(1999). “A higher-order theory for dynamic buckling and postbuckling analysis of laminated cylindrical shells.” J. Pressure Vessel Technol., 121(1), 94–102.
Eslami, M. R., Shariyat, M., and Shakeri, M.(1998). “Layerwise theory for dynamic buckling and postbuckling of laminated composite cylindrical shells.” AIAA J., 36(10), 1874–1882.
Iu, V. P., and Chia, C. Y.(1988). “Effect of transverse shear on nonlinear vibration and postbuckling of anti-symmetric cross-ply imperfect cylindrical shells.” Int. J. Mech. Sci., 30(10), 705–718.
Kardomateas, G. A.(1993). “Stability loss in thick transversely isotropic cylindrical shells under axial compression.” J. Appl. Mech., 60(2), 506–513.
Kardomateas, G. A.(1995). “Bifurcation of equilibrium in thick orthotropic cylindrical shells under axial compression.” J. Appl. Mech., 62(1), 43–52.
Mao, R., and Williams, F. W.(1998). “Nonlinear analysis of cross-ply thick cylindrical shells under axial compression.” Int. J. Solids Struct., 35(17), 2151–2171.
Reddy, J. N., and Liu, C. F.(1985). “A higher-order shear deformation theory of laminated elastic shells.” Int. J. Eng. Sci., 23(3), 319–330.
Reddy, J. N., and Liu, C. F. (1987). “A higher-order theory for geometrically nonlinear analysis of composite laminates.” National Aeronautics and Space Administration Rep. CR-4056, Washington, D.C.
Reddy, J. N., and Savoia, M.(1992). “Layer-wise shell theory for postbuckling of laminated circular cylindrical shells.” AIAA J., 30(8), 2148–2154.
Shen, H. S.(1997a). “Kármán-type equations for a higher-order shear deformation plate theory and its use in the thermal postbuckling analysis.” Appl. Math. Mech., 18(12), 1137–1152.
Shen, H. S.(1997b). “Post-buckling analysis of imperfect stiffened laminated cylindrical shells under combined external pressure and axial compression.” Comput. Struct., 63(2), 335–348.
Shen, H. S.(1997c). “Thermomechanical postbuckling analysis of stiffened laminated cylindrical shell.” J. Eng. Mech., 123(5), 433–443.
Shen, H. S.(1998). “Postbuckling analysis of imperfect stiffened laminated cylindrical shells under combined external pressure and thermal loading.” Int. J. Mech. Sci., 40(4), 339–355.
Shen, H. S.(2001). “The effects of hygrothermal conditions on the postbuckling of shear deformable laminated cylindrical shells.” Int. J. Solids Struct., 38(36), 6357–6380.
Shen, H. S., and Chen, T. Y.(1988). “A boundary layer theory for the buckling of thin cylindrical shells under external pressure.” Appl. Math. Mech., 9(6), 557–571.
Shen, H. S., and Chen, T. Y. (1990). “A boundary layer theory for the buckling of thin cylindrical shells under axial compression.” Advances in Applied Mathematics and Mechanics in China, Vol. 2, W. Z. Chien and Z. Z. Fu, eds., International Academic, Beijing, 155–172.
Shen, H. S., and Chen, T. Y.(1991). “Buckling and postbuckling of cylindrical shells under combined external pressure and axial compression.” Thin-Walled Struct., 12(4), 321–334.
Shen, H. S., Zhou, P., and Chen, T. Y.(1993). “Postbuckling analysis of stiffened cylindrical shells under combined external pressure and axial compression.” Thin-Walled Struct., 15(1), 43–63.
Simitses, G. J., and Anastasiadis, J. S.(1991). “Buckling of axially-loaded, moderately-thick, cylindrical laminated shells.” Composites Eng., 1(6), 375–391.
Simitses, G. J., and Anastasiadis, J. S.(1992). “Shear deformable theories for cylindrical laminates-equilibrium and buckling with applications.” AIAA J., 30(3), 826–834.
Tabiei, A., and Simitses, G. J.(1997). “Imperfection sensitivity of shear deformable moderately thick laminated cylindrical shells.” Comput. Struct., 62(1), 165–174.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Aug 7, 2000
Accepted: Jul 3, 2001
Published online: Mar 1, 2002
Published in print: Mar 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.