Micromechanic Formulation of Macroscopic Structures in a Granular Medium
Publication: Journal of Engineering Mechanics
Volume 127, Issue 10
Abstract
A granular medium is viewed as a heterogeneous continuum that satisfies mechanical equilibrium at each material point. Analysis of the strain distribution under deviatoric loading displays structures formation when the strain pattern is filtered through a directionally sensitive deformation intensity analyzer. The same type of analysis carried out on numerical experiments yields similar structures. Comparison between the two methods permits an estimate of the radius of the mesodomain that is characteristic for granular media. This scale is one of the necessary scales of discrimination that is needed for the understanding of the deformation of granular materials with elastofrictional particle interaction. Evolution of the thickness of the structures is also analyzed. They become elongated with increasing deviatoric deformation. The encroachment of the mesoscale onto the microscale (that is, the particle interactive scale) is signaled.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abramowitz, M., and Stegun, I. A. ( 1965). Handbook of mathematical functions, Dover, New York.
2.
Allersma, H. G. B. ( 1982). “Photo-elastic stress analysis and strains in simple shear.” Proc., IUTAM Conf. Deformation and Failure in Granular Mat., P. A. Vermeer and H. J. Luger, eds., Balkema, Rotterdam, The Netherlands, 345–354.
3.
Arthur, J. R. F., Chua, K. S., Dunstan, T., and del Rodriguez, C. J. I. (1980). “Principal stress rotation: A missing parameter.”J. Geotech. Engrg. Div., ASCE, 106(4), 419–433.
4.
Bagi, K. ( 1996). “Stress and strain in granular assemblies.” Mech. of Mat., 22(3), 165–177.
5.
Beran, M. J. ( 1968). “Statistical continuum mechanics.” Wiley, New York.
6.
Cundall, P. ( 1991). “Structural and material mechanics.” Mechanics computing in 1990's and beyond, H. Adeli and R. I. Sierakowski, eds., Vol. 2, ASCE, New York, 1279–1283.
7.
Cundall, P. A., Drescher, A., and Strack, O. D. L. ( 1982). “Numerical experiments on granular assemblies; measurements and observations.” Proc., IUTAM Conf. Deformation and Failure in Granular Mat., P. A. Vermeer and H. J. Luger, eds., Balkema, Rotterdam, The Netherlands, 355–370.
8.
Cundall, P. A., and Strack, O. D. L. ( 1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29, 47–65.
9.
Drescher, A., and de Josselin de Jong, G. ( 1972). “Photoeleastic verification for a model of the flow of a granular material.” J. Mech. Phys. Solids, 20, 337–351.
10.
Ericksen, J. L., Kinderlehrer, D., Kohn, R., and Lions, J.-L. ( 1986). Homogenization and effective moduli of materials and media, Springer, New York.
11.
Gaspar, N., and Koenders, M. A. ( 2000). “Micromechanic formulation of macroscopic structures in a granular medium.” Proc., 14th Engrg. Mech. Conf., J. L. Tassoulas, ed., ASCE, Reston, Va.
12.
Gaspar, N., and Koenders, M. A. ( 2001). “Estimates of the shear modulus of a granular assembly using heterogeneous media techniques.” Proc., Powders and Grains 2001, Balkema, Rotterdam, The Netherlands.
13.
Israelachvili, J. ( 1991). Intermolecular and surface forces, 2nd Ed., Academic, San Diego.
14.
Johnson, K. L. ( 1985). Contact mechanics, Cambridge University Press, New York.
15.
Kaisalam, M., and Ponte Castañeda, P. ( 1998). “A general constitutive theory for linear and non-linear particulate media with microstructure evolution.” J. Mech. Phys. Solids, 46(3), 427–465.
16.
Koenders, M. A. ( 1987). “The incremental stiffness of an assembly of particles.” Acta Mechanica, 70, 31–49.
17.
Koenders, M. A. ( 1997). “The evolution of spatially structured elastic materials using a harmonic density function.” Physical Rev., 56(5E), 5585–5593.
18.
Koenders, M. A. ( 1998). “Effects of microstructure and non-linearity in heterogeneous materials.” J. Phys. D, 31(15), 1875–1882.
19.
Konishi, J. ( 1978). “Microscopic model studies on the mechanical behaviour of granular materials.” Proc., U.S.-Japan Seminar on Continuum Mech. and Statistical Approaches in Mech. of Granular Mat., S. C. Cowin, and M. Satake, eds., Gakujutsu Bunken Fukyukai, Tokyo.
20.
Kröner, E. ( 1967). “Elastic moduli of perfectly disordered composite materials.” J. Mech. Phys. Solids, 15, 319–329.
21.
Kuhn, M. ( 1998). “Slip deformation structures in granular materials.” Proc., 12th Engrg. Mech. Conf., H. Murakami and J. E. Luco, eds., ASCE, Reston, Va., 1736–1739.
22.
Kuhn, M. ( 1999). “Structured deformation in granular materials.” Mech. of Mat., 31, 407–429.
23.
Murphy, G. J. ( 1959). Control engineering, Van Nostrand Reinhold, New York.
24.
Oda, M. ( 1972a). “Initial fabrics and their relations to mechanical properties of granular material.” Soils and Found., 12(1), 17–36.
25.
Oda, M. ( 1972b). “The mechanism of fabric changes during compressional deformation of sand.” Soils and Found., 12(4), 45–63.
26.
Peirce, A., et al. ( 1998). “Pacific Institute for the Mathematical Sciences (PIMMS).” Proc., Workshop on Micro-Structural Models of Rock Fracture, University of British Columbia, Vancouver.
27.
Satake, M. ( 1992). “A discrete-mechanical approach to granular materials.” Int. J. Engrg. Sci., 30(10), 1525.
28.
Williams, J. R., and Rege, N. ( 1997). “Coherent vortex structures in deforming granular materials.” Mech. of Cohesive-Frictional Mat., 2(3), 223–236.
Information & Authors
Information
Published In
History
Received: Mar 20, 2001
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.