Computations of Granular Flow and Pressures in a Flat-Bottomed Silo
Publication: Journal of Engineering Mechanics
Volume 127, Issue 10
Abstract
The most demanding design situations for silo structures usually occur at the onset of discharge, when the silo is still almost full of granular solid. In this condition, the pattern of solids flow affects the wall pressures, and both are currently difficult to predict even using the best numerical models. This paper describes part of an international collaborative study in which finite element and discrete element models were used by many leading research groups around the world to model a single well-defined problem of discharge from a flat-bottomed silo using many different programs. The results show that discrete element models give good qualitative predictions of flow patterns, and the finite-element models give good quantitative predictions of pressure regimes, but there is little agreement on the details either within each modeling paradigm or between them. Further extensive research is needed to reach a scientific consensus on the requirements for a reliable formulation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS/standard user's manual, volume 1, version 5.4. (1994). Hibbitt, Karlsson & Sorenson Inc., Pawtucket, R.I.
2.
Beverloo, W. A., Leniger, H. A., and van de Velde, J. ( 1961). “The flow of granular solids through orifices.” Chemical Engrg. Sci., 15, 260–269.
3.
Boyce, H. R. ( 1980). “A non-linear model for the elastic behaviour of granular material under repeated loading.” Proc., Int. Symp. on Soils under Cyclic and Transient Loading, Vol. 1, Swansea, U.K., 285–294.
4.
Brown, C. J., and Nielsen, J., eds. ( 1998). Silos: Fundamentals of theory, behaviour and design, E & FN Spon, London.
5.
Chen, J. F., Rotter, J. M., and Ooi, J. Y. ( 1998). “A review of numerical prediction methods for silo wall pressures.” Adv. in Struct. Engrg., 2(2), 119–136.
6.
Christoffersen, J., Mehrabadi, M. M., and Nemat-Nasser, S. ( 1981). “A micromechanical description of granular material behaviour.” J. Appl. Mech., 48(2), 339–343.
7.
Cundall, P. A., and Strack, O. D. L. ( 1979). “A discrete numerical model for granular assemblies.” Géotechnique, London, 29(1), 47–65.
8.
Drescher, A. ( 1991). Analytical methods in bin-load analysis, Elsevier Science, New York.
9.
Haussler, U., and Eibl, J. (1984). “Numerical investigations on discharging silos.”J. Engrg. Mech., ASCE, 110(6), 957–971.
10.
Holst, J. M. F. G., Ooi, J. Y., Rotter, J. M., and Rong, G. H. (1999a). “Numerical modelling of silo filling. Part 1: Continuum analyses.”J. Engrg. Mech., ASCE, 125(1), 94–103.
11.
Holst, J. M. F. G., Rotter, J. M., Ooi, J. Y., and Rong, G. H. (1999b). “Numerical modelling of silo filling. Part 2: Discrete element analyses.”J. Engrg. Mech., ASCE, 125(1), 104–110.
12.
Holst, J. M. F. G., Rotter, J. M., Ooi, J. Y., and Rong, G. H., eds. ( 1997). “Discrete particle and continuum modelling of particulate solids in silos: Silo filling.” Final Rep. No. R97-7, Dept. of Civ. and Envir. Engrg., University of Edinburgh, Edinburgh, U.K.
13.
Janbu, N. ( 1963). “Soil compressibility as determined by oedometer and triaxial tests.” Proc., Eur. Conf. on Soil Mech. and Found. Engrg., Vol. 1, 19–25.
14.
Janssen, H. A. ( 1895). “Versuche über Getreidedruck in Silozellen.” Zeitschrift des Vereins Deutscher Ingenieure, 39, 1045–1049.
15.
Kuhn, M. ( 1997). “Deformation measures for granular materials.” Proc., Symp. Mech. of Deformation and Flow of Particulate Mat., ASME-ASCE Meeting, Evanston, Ill., 91–104.
16.
Lade, P. V. ( 1977). “Elasto-plastic stress strain theory for cohesionless soil with curved yield surface.” Int. J. Solids and Struct., 13, 1019–1035.
17.
Masson, S., Martinez, J., and Deserable, D. ( 1996). “Comparative simulations of particle flow within a cone-in-cone silo using a distinct element method and a lattice grain model.” Proc., 5th World Congr. Chem. Engrg., San Diego, Calif., 349–354.
18.
Nedderman, R. M. ( 1992). Statics and kinematics of granular materials, Cambridge University Press, Cambridge, U.K.
19.
Potapov, A. V., and Campbell, C. S. ( 1998). “A fast model for the simulation of non-round particles.” Granular Matter, 1, 9–14.
20.
Ragneau, E., Aribert, J. M., and Sanad, A. M. ( 1994). “Modele tri-dimensionnel aux elements finis pour le calcul des actions sur les parois d'un silo (remplissage et vidange).” Construction Métallique, 2, 3–25.
21.
Ristow, G. H., and Hermann, H. J. ( 1995). “Forces on the walls and stagnation zones in a hopper filled with granular material.” Physica, 213A, 474–481.
22.
Rong, G., Negi, S. C., and Jofriet, J. C. ( 1995). “Simulation of flow behavior of bulk solids in bins, Part I. DEM model development and validation, Part II. Shear bands, flow corrective inserts and velocity profiles.” J. Agric. Engrg. Res., 62, 247–269.
23.
Rotter, J. M., Holst, J. M. F. G., Ooi, J. Y., and Sanad, A. M. ( 1998a). “Silo pressure predictions using discrete element and finite element analyses.” Philosophical Trans. Royal Soc., London, 356(1747), 2685–2712.
24.
Rotter, J. M., Moore, I. D., Ooi, J. Y., Holst, J. M. F. G., and Stove, A. D. ( 1998b). “Effect of non-uniform wall friction on filling pressures in silos.” Proc., 6th Int. Conf. on Bulk Mat. Storage, Handling and Transp., Institution of Engineers, Australia, Wollongong, Australia, 425–434.
25.
Sanad, A. M., Holst, J. M. F. G., Ooi, J. Y., and Rotter, J. M., eds. ( 1997). “Discrete particle and continuum modelling of particulate solids in silos: Silo discharge.” Final Rep. No. R97-11, Dept. of Civ. and Envir. Engrg., University of Edinburgh, Edinburgh, U.K.
26.
Ting, J. M., Khwaja, M., Meachum, L. R., and Rowell, J. D. ( 1993). “An ellipse-based discrete element model for granular materials.” Int. J. Numer. and Analytical Methods in Geomech., 17(9), 603–623.
27.
Walker, D. M. ( 1966). “An approximate theory for pressure and arching in hoppers.” Chemical Engrg. Sci., 21, 975–997.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 127 • Issue 10 • October 2001
Pages: 1033 - 1043
History
Received: Apr 27, 2001
Published online: Oct 1, 2001
Published in print: Oct 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.