Updating Structural System Parameters Using Frequency Response Data
Publication: Journal of Engineering Mechanics
Volume 126, Issue 12
Abstract
New approaches are developed that use two sets of measured frequency response data to update the analytical system mass and stiffness parameters in order to improve the agreement between the dynamical behaviors of the analytical and actual systems. Taking the differences between the measured frequency response and the analytical predictions, the resulting matrix equations are first manipulated to isolate the mass correction matrix of the system, after which the stiffness matrix can be adjusted. Rearranging the system correction matrices into vector forms, the connectivity information can be enforced, thereby preserving the physical configuration of the system and reducing the sizes of the least-squares problems that need to be solved. Solution techniques to perform the model update are introduced, and the numerical issues associated with solving overdetermined and underdetermined least-squares problems are investigated. Heuristic criteria are given for determining the minimum number of frequency response data points that need to be measured in order to ensure sufficiently accurate updated mass and stiffness matrices, and numerical experiments are presented to validate the proposed model updating techniques based on using the frequency response data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bathe, K. J. ( 1982). Finite element procedures in engineering analysis, Prentice-Hall, Englewood Cliffs, N.J.
2.
Béliveau, J. G. ( 1976). “Identification of viscous damping in structures from modal information.” J. Appl. Mech., 43(2), 335–338.
3.
Chen, F. Y. ( 1971). “On modeling and direct solution of certain free vibration systems.” Sound and Vibration, 14(1), 57–79.
4.
Creamer, N. G., and Junkins, J. C. ( 1988). “Identification method for lightly damped structures.” AIAA J. Guidance, 11(6), 571–576.
5.
Friswell, M. I. ( 1989). “Updating physical parameters from frequency response function data.” Proc., 12th Biennial ASME Conf. on Mech. Vibration and Noise, 18(4), 393–400.
6.
Goh, E. L., and Mottershead, J. E. ( 1993). “On model reduction techniques for finite element updating.” Proc., NAFEMS/DTA Int. Conf. on Struct. Dyn., Modelling, Test, Analysis, and Correlation, 421–432.
7.
Golub, G. H., and Van Loan, C. F. ( 1989). Matrix computations, 2nd Ed., Johns Hopkins University Press, Baltimore.
8.
Hart, G. C., and Martinez, D. R. ( 1982). “Improving analytic dynamic models using frequency response data—application.” Proc., 23rd AIAA/ASME/ASCE/AHS Struct. Dyn. and Mat. Conf., 46–55.
9.
Hasselman, T. K. ( 1972). “A method of constructing a full modal damping matrix from experimental measurements.” AIAA J., 10(4), 526–527.
10.
Hughes, T. J. R. ( 1987). The finite element method: Linear static and dynamic finite element analysis, Prentice-Hall, Englewood Cliffs, N.J.
11.
Minas, C., and Inman, D. J. ( 1991). “Identification of a non-proportional damping matrix from incomplete modal information.” J. Vibration and Acoustics, 113(2), 219–224.
12.
Mottershead, J. E., and Friswell, M. I. ( 1993). “Model updating in structural dynamics: A survey.” Sound and Vibration, 167(2), 347–375.
13.
O'Callahan, J. C. ( 1989). “A procedure for an improved reduced system (IRS) model.” Proc., 7th Int. Modal Analysis Conf., 17–21.
14.
Rao, C. R., and Mitra, S. K. ( 1971). Generalized inverse of matrices and its applications, Wiley, New York.
15.
Visser, W. J., and Imregun, M. ( 1991). “A technique to update finite element models using frequency response data.” Proc., 9th IMAC, 462–468.
Information & Authors
Information
Published In
History
Received: Aug 5, 1999
Published online: Dec 1, 2000
Published in print: Dec 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.