Numerical Simulation of Advected Thermal Using Gaussian-Vortex Model
Publication: Journal of Engineering Mechanics
Volume 126, Issue 10
Abstract
The Gaussian-vortex integral model is applied to laboratory data on an advected thermal and field experimental data for a single submerged sewage outfall. The Gaussian-vortex integral model is distinguished from other conventional jet integral models that do not consider vortex-pair formation effects on the behavior of a buoyant jet in the buoyancy- and ambient-dominated regions. The experimental data relative to an advected thermal, measured by a laser-induced fluorescence technique were used for verifications of the numerical model. With the incorporation of vortex-pair formation effects, the simulated results on the bulk characteristics of an advected thermal were in good agreement with the laboratory data, and for applications the simulated surface minimum dilutions also show fairly good agreement with field experimental data. Finally, the numerical model is applied to a horizontal buoyant jet in cross-flow to demonstrate the capability of the numerical model for the buoyant jet that has 3D characteristics.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cheung, V. ( 1991). “Mixing of a round buoyant jet in a current.” PhD thesis, Dept. of Civ. and Struct. Engrg., University of Hong Kong, Hong Kong.
2.
Chu, V. H. ( 1977). A line and impulse model for buoyant jets in a crossflow in heat transfers and turbulent buoyant convection, D. B. Spalding and N. Afgan, eds., Vol. 1, 325–337.
3.
Chu, V. H. (1985). “Oblique turbulent jets in a crossflow.”J. Engrg. Mech., ASCE, 111(11), 1343–1360.
4.
Chu, V. H., and Goldberg, M. B. (1974). “Buoyant forced-plumes in cross flow.”J. Hydr. Div., ASCE, 100(9), 1203–1214.
5.
Cresswel, R. W., Morton, B. R., Nguyen, K. C., and Baines, D. G. ( 1992). “Thermals, puffs and mass sources 3—Laboratory studies.” Proc., 11th Australasian Fluid Mech. Conf., Vol. 2, 1149–1152.
6.
Davidson, M. J. ( 1989). “The behaviour of single and multiple, horizontally discharged, buoyant flows in a non-turbulent coflowing ambient fluid.” Res. Rep. No. 89-3, University of Canterbury, Christchurch, New Zealand.
7.
Davidson, M. J., Kundsen, M., and Wood, I. R. (1991). “The behavior of a single, horizontally discharged, buoyant flow in a non-turbulent coflowing ambient fluid.”J. Hydr. Res., Delft, The Netherlands, 29(4), 545–566.
8.
Fan, L. N. ( 1967). “Turbulent buoyant jets into stratified or flowing ambient fluids.” Rep. No. KH-R-15, California Institute of Technology, Pasadena, Calif.
9.
Fischer, H. B., List, E. J., Koh, R. C. Y., Imberger, J., and Brooks, N. H. ( 1979). Mixing in inland and coastal waters, Academic, San Diego.
10.
Fric, T. F., and Roshko, A. ( 1994). “Vortical structure in the wake of a transverse jet.” J. Fluid Mech., Cambridge, U.K., 279, 1–47.
11.
Gaskin, S. J. ( 1995). “Single buoyant jet in a crossflow and the advected line thermal.” PhD thesis, Dept. of Civ. Engrg., University of Canterbury, Christchurch, New Zealand.
12.
Gerald, C. F., and Wheatley, P. O. ( 1984). Applied numerical analysis, 3rd Ed., Addison-Wesley, Reading, Mass.
13.
Knudsen, M. ( 1988). “Buoyant horizontal jets in an ambient flow.” PhD thesis, Dept. of Civ. Engrg., University of Canterbury, Christchurch, New Zealand.
14.
Lee, J., and Seo, I. W. ( 1999). “Numerical modeling of mixing processes of a round buoyant jet in flowing stratified ambients.” Rep. No. SNU/HER-40, Hydroengrg. Lab., Dept. of Civ. Engrg., Seoul National University, Seoul.
15.
Lee, J. H. W., and Cheung, V. (1990). “Generalized Lagrangian model for buoyant jets in current.”J. Envir. Engrg., ASCE, 116(6), 1085–1106.
16.
Lee, J. H. W., and Chu, P. C. K. ( 1995). “Application of video image processing in the study of environmental flows.” Proc., 10th Conf. Engrg. Mech. Div., ASCE, New York, 1014–1017.
17.
Lee, J. H. W., and Neville-Jones, P. (1987). “Initial dilution of horizontal jet in crossflow.”J. Hydr. Engrg., ASCE, 113(5), 615–629.
18.
Muellenhoff, W. P., Soldate, A. M., Jr. Baumgartner, D. J., Schuldt, M. D., Davis, L. R., and Frick, W. E. ( 1985). Initial mixing characteristics of municipal ocean discharges, Vol. I. Procedures and applications, EPA 630/3-85-073a, Marine Operation Div.: 301(h) Program, Office of Marine and Estuarine Protection, Washington, D.C.
19.
Papanicolaou, P. N. ( 1984). “Mass and momentum transport in a turbulent buoyant vertical axisymmetric jet.” PhD thesis, W. M. Keck Lab. of Hydr. and Water Resour., California Institute of Technology, Pasadena, Calif.
20.
Papanicolaou, P. N., and List, E. J. ( 1988). “Investigations of round vertical turbulent buoyant jets.” J. Fluid Mech., Cambridge, U.K., 195, 341–391.
21.
Proni, J. R., Huang, H., and Dammann, W. P. (1994). “Initial dilution of Southeast Florida Ocean outfalls.”J. Hydr. Engrg., ASCE, 120(12), 1409–1425.
22.
Richards, J. M. ( 1963). “Experiments on the motions of isolated cylindrical thermals through unstratified surroundings.” Int. J. Air and Water Pollution, 7, 17–34.
23.
Scorer, R. S. ( 1959). “The behavior of chimney plumes.” Int. J. Air Pollution, 1, 198–220.
24.
Wong, C. F. ( 1991). “Advected line thermals and puffs.” MS thesis, University of Hong Kong, Hong Kong.
25.
Wood, I. R. (1993). “Asymptotic solutions and behavior of outfall flumes.”J. Hydr. Engrg., ASCE, 119(5), 553–580.
26.
Wood, I. R., Bell, R. G., and Wilkinson, D. L. ( 1993). Ocean disposal of wastewater, World Scientific, Singapore.
27.
Wright, S. J. ( 1977). Effects of ambient crossflows and density stratification on the characteristic behavior of round turbulent buoyant jets, KH-R-36, W. M. Keck Lab. of Hydr. and Water Resour., California Institute of Technology, Pasadena, Calif.
28.
Wright, S. J. (1984). “Buoyant jets in density-stratified crossflow.”J. Hydr. Engrg., ASCE, 110(5), 643–656.
Information & Authors
Information
Published In
History
Received: Aug 25, 1999
Published online: Oct 1, 2000
Published in print: Oct 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.