Imperfections in Cylindrical Shells Resulting from Fabrication Misfits
Publication: Journal of Engineering Mechanics
Volume 125, Issue 4
Abstract
This paper presents part of a rigorous numerical study of the geometry changes in cylindrical shells due to localized fabrication misfit and the associated consistent residual stress field. The search for practically useful and credible modes of imperfections has led to this study of the geometric imperfections arising from misfits of construction. These are treated here by using a geometrically nonlinear analysis to study the effect of a mismatch in geometry at a point or a seam in a cylinder, or alternatively to explore the role of weld shrinkage in the formation of geometric imperfections. The imperfect geometries arising from these misfits are demonstrated, and some simplifications are given so that their shape may later be used in methods for characterizing imperfection patterns that can be applied to measurements of structures in service. It is found that the geometrical changes are essentially linear for most of the shrinkages considered.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS/standard users's manual, volume 1, version 5.7. (1997). Hibbitt, Karlsson & Sorenson, Inc., Pawtucket, R.I.
2.
Bornscheuer, F. W., Hafner, L., and Ramm, E. ( 1983). “Zur Stabilität eines Kreiszylinders mit einer Rundschweißnaht unter Axialbelastung.” Der Stahlbau, Berlin, 52, 313–318 (in German).
3.
Calladine, C. R. ( 1983). Theory of shell structures. Cambridge University Press, Cambridge, U.K.
4.
Calladine, C. R. ( 1995). “Understanding imperfection-sensitivity in the buckling of thin-walled shells.” Thin Walled Struct.: Spec. Issue on Imperfection-Sensitive Shells, G. D. Galletly, ed., 23, 215–235.
5.
Ding, X. L., Coleman, R. D., and Rotter, J. M. (1996). “Technique for precise measurement of large-scale silos and tanks.”J. Surv. Engrg., ASCE, 122(1), 14–25.
6.
Holst, J. M. F. G., Rotter, J. M., and Calladine, C. R. ( 1996). “Geometric imperfections and consistent residual stress fields in elastic cylinder buckling under axial compression.” Proc., Int. Workshop on Imperfections in Metal Silos: Measurement, Characterisation, and Strength Analysis, 199–216.
7.
Lacher, G., and Haspel, H. ( 1980). “Baustellenmaßnahmen zur Erzielung der Maßhaltigkeit bei einem großen Zementklinkersilo.” Der Stahlbau, Berlin, 49, 65–69 (in German).
8.
Lukasiewicz, S. ( 1979). Local loads in plates and shells. Sijthoff and Noordhoff International Publishers, Alpen aan den Rijn, The Netherlands.
9.
Martens, P. ( 1988a). “Stahl- und Aluminiumsilos.” Silo-Handbuch, P. Martens, ed., Wilhelm Ernst and Sohn, Berlin, 255–341 (in German).
10.
Martens, P. ( 1988b). “Bauausführung: Ausführung in Stahl.” Silo-Handbuch, P. Martens, ed., Wilhelm Ernst and Sohn, Berlin, 460–463 (in German).
11.
Rotter, J. M. ( 1996). “Elastic plastic buckling and collapse in internally pressurised axially compressed silo cylinders with measured axisymmetric imperfections: Interactions between imperfections, residual stresses, and collapse.” Proc., Int. Workshop on Imperfections in Metal Silos: Measurement, Characterisation, and Strength Analysis, 119–140.
12.
Rotter, J. M. ( 1997). “Design standards and calculations for imperfect pressurised axially compressed cylinders.” Proc., Int. Conf. on Carrying Capacity of Steel Shell Struct., V. Krupka and P. Schneider, eds., 354–360.
13.
Rotter, J. M., and Teng, J. G. (1989). “Elastic stability of cylindrical shells with weld depressions.”J. Struct. Engrg., ASCE, 115(5), 1244– 1263.
14.
Rotter, J. M., and Zhang. (1990). “Elastic buckling of imperfect cylinders containing granular solids.”J. Struct. Engrg., ASCE, 116(8), 2253–2271.
15.
Teng, J. G., and Rotter, J. M. (1992). “Buckling of pressurized axisymmetrically imperfect cylinders.”J. Engrg. Mech., ASCE, 118(2), 229– 247.
16.
Theimer, O. F., and Martens, P. ( 1988). “Siloschäden.” Silo-Handbuch, P. Martens, ed., Wilhelm Ernst and Sohn, Berlin, 465–481 (in German).
17.
Timoshenko, S. P., and Woinowsky-Krieger, S. ( 1959). Theory of plates and shells, 2nd Ed., McGraw-Hill, New York.
18.
Yamaki, N. ( 1984). Elastic stability of circular cylindrical shells. North-Holland, Amsterdam.
Information & Authors
Information
Published In
History
Received: Dec 29, 1997
Published online: Apr 1, 1999
Published in print: Apr 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.