New Micromechanics Design Theory for Pseudostrain Hardening Cementitious Composite
Publication: Journal of Engineering Mechanics
Volume 125, Issue 4
Abstract
The micromechanics design theory has realized random short fiber-reinforced cement composites showing pseudostrain hardening (PSH) behavior with over 5% of strain capacity under tension. Nevertheless, this existing theory currently is limited to specific constituent properties, which does not account for chemical bond and fiber rupture. This article presents a new design theory that eliminates this restriction, achieving fiber rupture type PSH-random short fiber-reinforced cement composites with high-performance hydrophilic fibers like polyvinyl alcohol fibers. Uniaxial tensile tests are conducted employing polyvinyl alcohol fiber composites, the results of which support the validity of the proposed theory. Furthermore, parametric study employing the proposed theory quantitatively evaluates the effects of composite's micromechanics parameters, such as bond strength and fiber strength, on composite performance. This parametric study reveals that continuously increasing the degree of fiber rupture (fiber rupture intensity) enhances the strength performance of composites but not energy performance. However, an optimum rupture intensity exists for maximizing energy performance, which is critical for PSH behavior. The consistency between theoretical predictions and experimental results consequently demonstrates that the proposed theory can be utilized practically as a powerful and comprehensive tool for PSH composite design.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akihama, S., Suenaga, T., Nakagawa, H., and Suzuki, K. ( 1985). “Experimental study of vinylon fiber reinforced cement composites “VFRC” (Part I).” Kajima Annu. Tech. Rep., Kajima Corporation, 33, 123–128 (in Japanese).
2.
Aveston, J., Cooper, G. A., and Kelly, A. ( 1971). “Single and multiple fracture.” The properties of fiber composites, Guildford, U.K., 15–26.
3.
Betterman, L. R., Ouyang, C., and Shah, S. P. ( 1995). “Fiber-matrix interaction in microfiber-reinforced mortar.” Adv. Cement Based Mat., 3(2), 53–61.
4.
Evans, A. G., Domergue, J. M., and Vagaggini, E. ( 1994). “Methodology for relating the tensile constitutive behavior of ceramic matrix composites to constituent properties.” J. Am. Ceramic Soc., 77(6), 1425–1435.
5.
Garcia, S., Naaman, A. E., and Pera, J. ( 1997). “Experimental investigation on the potential use of poly(vinyl alcohol) short fibers in fiber-reinforced cement-based composites.” Mat. and Struct., Paris, 30(Jan.-Feb.), 43–52.
6.
Kanda, T., and Li, V. C. (1999). “Effect of apparent strength and fiber-matrix interface properties on crack bridging in cementitious composites.”J. Engrg. Mech., ASCE, 125(3).
7.
Kanda, T., and Li, V. C. (1998a). “Interface property and apparent strength of a high strength hydrophilic fiber in cement matrix.”J. Mat. in Civ. Engrg., ASCE, 10(1), 5–13.
8.
Kanda, T., and Li, V. C. ( 1998b). “Multiple cracking sequence and saturation in fiber reinforced cementitious composites.” Concrete Res. and Technol., Tokyo, 9(2), 1–15.
9.
Leung, C. K. Y. (1996). “Design criteria for pseudoductile fiber-reinforced composites.”J. Engrg. Mech., ASCE, 122(1), 10–14.
10.
Li, V. C. ( 1993). “From micromechanics to structural engineering—the design of cementitious composites for civil engineering applications.” J. Struct. Mech. Earthquake Engrg., Tokyo, 10(2), 37–48.
11.
Li, V. C., and Leung, K. Y. (1992). “Steady-state and multiple cracking of short random fiber composites.”J. Engrg. Mech., ASCE, 118(11), 2246–2263.
12.
Li, V. C., Mishra, D. K., and Wu, H. C. ( 1995). “Matrix design for pseudo-strain hardening fiber reinforced cementitious composites.” Mat. and Struct., Paris, 28, 586–595.
13.
Li, V. C., Wang, Y., and Backer, S. ( 1990). “Effect of inclining angle, bundling, and surface treatment on synthetic fiber pull-out from a cement matrix.” Composites, 21(2), 132–140.
14.
Li, V. C., Wu, H. C., and Chan, Y. W. ( 1996). “Effect of plasma treatment of polyethylene fibers on interface and cementitious composite properties.” J. Am. Ceramics Soc., 79(3), 700–704.
15.
Maalej, M., Li, V. C., and Hashida, T. (1995). “Effect of fiber rupture on tensile properties of short fiber composites.”J. Engrg. Mech., ASCE, 121(8), 903–913.
16.
Marshall, D. B., and Cox, B. N. ( 1988). “A J-integral method for calculating steady-state matrix cracking stresses in composites.” Mech. of Mat., 7, 127–133.
17.
Marshall, D. B., Cox, B. N., and Evans, A. G. ( 1985). “The mechanics of matrix cracking in brittle-matrix fiber composites.” Acta Metallurgica, 33(11), 2013–2021.
18.
Naaman, A. E., and Reinhardt, H. W. ( 1995). High performance fiber reinforced cement composites. E & FN Spon, London.
19.
Spearing, S. M., and Zok, F. W. ( 1993). “Stochastic aspects of matrix cracking in brittle matrix composites.” J. Engrg. Mat. and Technol., 115, 314–318.
20.
Wu, H. C., and Li, V. C. ( 1995). “Stochastic process of multiple cracking in discontinuous random fiber reinforced brittle matrix composites.” Int. J. of Damage Mech., 4(1), 83–102.
Information & Authors
Information
Published In
History
Received: Jan 26, 1998
Published online: Apr 1, 1999
Published in print: Apr 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.