The “Chunnel” Fire. I: Chemoplastic Softening in Rapidly Heated Concrete
Publication: Journal of Engineering Mechanics
Volume 125, Issue 3
Abstract
This paper and its companion paper present the main results of an assessment of the fire in the Channel Tunnel (the “Chunnel”), which destroyed a part of the concrete tunnel rings by thermal spalling. The study seeks (1) to evaluate the effect of thermal damage (loss of elastic stiffness) and thermal decohesion (loss of material strength) upon the stress state and cracking at a structural level; and (2) to check whether restrained thermal dilatation can explain the thermal spalling observed during the fire. In the present paper, a macroscopic material model for rapidly heated concrete is developed. It accounts explicitly for the dehydration of concrete and its cross-effects with deformation (chemomechanical couplings) and temperature (chemothermal couplings). The thermal decohesion is considered as chemoplastic softening within the theoretical framework of chemoplasticity. Furthermore, kinetics of dehydration, dimensional analysis, and thermodynamic equilibrium considerations show that a unique thermal dehydration function exists that relates the hydration degree to the temperature rise, provided that the characteristic time of dehydration is much inferior to the characteristic time of structural heat conduction. The experimental determination of the thermal dehydration function from in-situ measurements of the elastic modulus versus furnace temperature rise is shown from experimental data available from the chunnel concrete. Finally, by way of an example, the proposed constitutive model for rapidly heated concrete is combined with the three-parameter William-Warnke criterion extended to isotropic chemoplastic softening.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahmed, G. N., and Hurst, J. P. ( 1995). “Modeling the thermal behavior of concrete slabs subjected to the ASTM E119 standard fire conditions.” J. Fire Protection Engrg., 7(4), 125–132.
2.
Anderberg, Y. ( 1997). “Spalling phenomena of HPC and OC.” Proc., Int. Workshop on Fire Performance of High-Strength Concrete, NIST Spec. Publ. 919, L. T. Phan, N. J. Carino, D. Duthinh, and E. Garboczi, eds., National Institute of Standards and Technology, Gaithersburg, Md., 69–73.
3.
Bažant, Z. P. ( 1997). “Analysis of pore pressure, thermal stresses and fracture in rapidly heated concrete.” Proc., Int. Workshop on Fire Performance of High-Strength Concrete, NIST Spec. Publ. 919, L. T. Phan, N. J. Carino, D. Duthinh, and E. Garboczi, eds., National Institute of Standards and Technology, Gaithersburg, Md., 155–164.
4.
Bažant, Z. P., and Kaplan, M. F. ( 1996). Concrete at high temperatures: Material properties and mathematical models, Longman (Addison-Wesley, London.
5.
Bažant, Z. P., and Thongutai, W. (1978). “Pore pressure and drying of concrete at high temperature.”J. Engrg. Mech. Div., ASCE, 104, 1058–1080.
6.
Bažant, Z. P., and Thongutai, W. ( 1979). “Pore pressure in heated concrete walls: Theoretical prediction.” Mag. of Concrete Res., London, 31(107), 67–76.
7.
Boumiz, A., Vernet, C., and Cohen Tenoudji, F. ( 1996). “Mechanical properties of cement pastes and mortars at early ages. Evolution with time and degree of hydration.” Advanced Cement Based Mat., 3, 94– 106.
8.
Byfors, J. ( 1980). “Plain concrete at early ages.” Res. Rep. F3:80, Swedish Cement and Concrete Research Institute, Stockholm.
9.
Chen, W. F., and Han, D. J. ( 1988). Plasticity for structural engineers. Springer, New York.
10.
“Conception et dimensionnement des structures mixtes acier-béton.” Eurocode 4, AFNOR, Paris.
11.
Consolazio, G. R., McVay M., and Rish, J. W. III. ( 1997). “Measurement and prediction of pore pressure in cement mortar subjected to elevated temperature.” Proc., Int. Workshop on Fire Performance of High-Strength Concrete, NIST Spec. Publ. 919, L. T. Phan, N. J. Carino, D. Duthinh, and E. Garboczi, eds., National Institute of Standards and Technology, Gaithersburg, Md., 125–148.
12.
Coussy, O. ( 1995). Mechanics of porous continua. Wiley, Chichester, U.K.
13.
Coussy, O., and Ulm, F.-J. ( 1996). “Creep and plasticity due to chemo-mechanical couplings.” Archive of Appl. Mech., 66, Springer, Berlin, 523–535.
14.
Fasseu, P. ( 1997). “Eurotunnel-Fire. Analysis of the effect of the fire on the concrete quality.” Res. Rep. No. 96.6002532 (April 1997), Laboratoire Regional des Ponts et Chaussées de Lille, Lille, France (in French).
15.
Franssen, J. M. ( 1987). “Analysis of the fire behavior of steel-concrete composite structures,” PhD thesis, No. 111, University of Liège, Liège, Belgium (in French).
16.
Harmathy, T. Z. ( 1965). “Effect of moisture on the fire endurance of building materials.” No. 385, ASTM, Philadelphia, 74–95.
17.
Heinfling, G., Reynouard, J. M., Merabet, O., and Duval, C. ( 1997). “A thermo-elastic-plastic model for concrete at elevated temperatures including cracking and thermo-mechanical interaction strains.” Computational Plasticity. Fundamentals of Applications (Proc. COMPLAS V), D. R. J. Owen, E. Onate, and E. Hinton, eds., Vol. 2, CIMNE, Barcelona, Spain, 1493–1498.
18.
Hellmich, C., Ulm, F.-J., and Mang, H. A. ( 1997). “Chemoplasticity for shotcrete at early ages.” Computational Plasticity. Fundamentals and Applications (Proc. COMPLAS V), D. R. J. Owen, E. Onate, and E. Hinton, eds., Vol. 2, CIMNE, Barcelona, Spain, 1499–1507.
19.
Khennane, A., and Baker, G. ( 1992). “Plasticity models for the biaxial behavior of concrete at elevated temperatures.” Computational Methods of Appl. Mech. and Engrg., 100, 207–223.
20.
Kontani, O. ( 1994). “Experimental determination and theoretical prediction of pore pressure in sealed concrete at sustained high temperatures,” PhD thesis, Northwestern University, Evanston, Ill.
21.
Laube, M. ( 1990). “Constitutive model for the analysis of temperature-stresses in massive structures,” PhD thesis, TU Braunschweig, Braunschweig, Germany (in German).
22.
Lin, W.-M., Lin, T. D., and Powers-Couche, L. J. ( 1996). “Microstructure of fire-damaged concrete.” ACI Mat. J., 93(3), 199–205.
23.
Mindess, S., Young, J. F., and Lawrence, F.-V. ( 1978). “Creep and drying shrinkage of calcium silicate pastes. I: Specimen preparation and mechanical properties.” Cement and Concrete Res., 8, 591–600.
24.
Noumowé, N. A. ( 1995). “Effect of high temperature (20°–600°C) on concrete. The case of high performance concretes,” PhD thesis, INSA de Lyon, Lyon, France (in French).
25.
Ortiz, M., and Simo, J. C. ( 1986). “An analysis of a new class of integration algorithms for elastoplastic constitutive relations.” Int. J. Numer. Methods in Engrg., 23, 353–366.
26.
Phan, L. T. ( 1997). “Fire performance of high-strength concrete: A report of the state-of-the art.” Res. Rep. NISTIR 5934, National Institute of Standards and Technology, Gaithersburg, Md.
27.
Phan, L. T., Carino, N. J., Duthinh, D., and Garboczi, E., eds. ( 1997). Proc., Int. Workshop on Fire Performance of High-Strength Concrete, NIST Spec. Publ. 919, National Institute of Standards and Technology, Gaithersburg, Md.
28.
Powers, G., and Brownyard, T. L. ( 1948). “Studies of the physical properties of hardened portland cement paste.” Res. Bull. 22, Portland Cement Association, Skokie, Ill.
29.
Schneider, U. ( 1982). “Behavior of concrete at high temperatures.” Deutscher Ausschuss fur Stahlbeton, Heft 337, Verlag Wilhelm Ernst u. Sohn, Berlin.
30.
Simo, J. C., and Hughes, T. J. R. ( 1997). Elastoplasticity and viscoplasticity. Computational aspects. Springer, Berlin.
31.
Torrenti, J.-M. ( 1992). “Strength of concrete at very early stages.” Bulletin de liaison des laboratoires des ponts et chaussees, Paris, 179, 31–41 (in French).
32.
Ulm, F.-J., Acker, P., and Lévy, M. (1999). “The `Chunnel' fire. II: Analysis of Concrete Damage.”J. Engrg. Mech., ASCE, 125(3), 283–289.
33.
Ulm, F.-J., and Coussy, O. (1995). “Modeling of thermochemomechanical couplings of concrete at early ages.”J. Engrg. Mech., ASCE, 121(7), 785–794.
34.
Ulm, F.-J., and Coussy, O. (1996). “Strength growth as chemoplastic hardening in early age concrete.”J. Engrg. Mech., ASCE, 122(12), 1123–1132.
35.
Willam, K. J., and Warnke, E. P. ( 1975). “Constitutive model for the triaxial behavior of concrete.” IABSE Proc., 19, Seminar on Concrete Structures Subjected to Triaxial Stresses, Paper III-1, International Association for Bridge and Structural Engineering, Zurich.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 125 • Issue 3 • March 1999
Pages: 272 - 282
History
Received: Oct 29, 1997
Published online: Mar 1, 1999
Published in print: Mar 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.