Stochastic Analysis of Load Combination
Publication: Journal of Engineering Mechanics
Volume 124, Issue 9
Abstract
This paper reviews the methods for combining loads idealized as Poisson processes. Hasofer's method for combining a Poisson square wave load with a Poisson impulsive load is extended to the case of a combination of one square wave load with an arbitrary number of impulsive loads. The problem of considering the effects of dead load is addressed. Both the instantaneous and the largest value in structural life time statistics of a combination are determined. The following load combinations are considered in the applications: (1) dead and live load on floors; (2) dead and wind load; and (3) a combination involving four loads. As the percentage of dead load with respect to the sum of all load averages decreases, it is found that all fractiles of the largest value distribution increase, even considerably. Finally, a new combination rule for practical use is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Basic notes on actions.” (1976). Appendix to the Bulletin CEB, No. 112, Comité Eurointernational du Béton, Paris, France.
2.
Bosshard, W. (1975). “On stochastic load combination.”Tech. Rep. No. 20, Dept. of Civ. Engrg., Stanford University, Stanford, Calif.
3.
Breitung, K., and Rackwitz, R.(1982). “Nonlinear combination of load processes.”J. Struct. Mech., 10(2), 145–166.
4.
“Building code requirements for reinforced concrete.” (1995). ACI 318–95, American Concrete Institute, Detroit, Mich.
5.
Choi, E. C. C.(1989). “Live load model for office buildings.”The Struct. Engr., 67(24), 421–437.
6.
Choi, E. C. C.(1991). “Extraordinary live load in office buildings.”J. Struct. Engrg., ASCE, 117(11), 3216–3217.
7.
Choi, E. C. C.(1992). “Live load in office buildings: lifetime maximum load and the influence of room use.”Proc., Inst. Civ. Engrs., Struct. and Buildings, ICE, London, U.K., 94, 307–314.
8.
Corotis, R. B., and Jaria, V. A.(1979). “Stochastic nature of building live loads.”J. Struct. Div., ASCE, 105(3), 493–510.
9.
Davenport, A. G.(1961). “The application of statistical concepts to the wind loading of structures.”Proc., Inst. Civ. Engrs., ICE, London, U.K., 19, 449–471.
10.
Ditlevsen, O., and Madsen, H. O. (1981). “Probabilistic modeling of man-made load processes and their individual and combined effects.”Struct. Safety and Reliability: Proc., ICOSSAR '81, T. Moan and M. Shinozuka, eds., Trondheim, Norway, 103–135.
11.
Ditlevsen, O., and Madsen, H. O.(1983). “Transient load modeling: clipped normal processes.”J. Engrg. Mech., ASCE, 109(2), 494–515.
12.
Ditlevsen, O., Olesen, R., and Mohr, G.(1987). “Solution of a class of load combination problems by directional simulation.”Struct. Safety, 4, 95–109.
13.
Ellingwood, B., and Culver, C.(1977). “Analysis of live loads in office buildings.”J. Struct. Div., ASCE, 103(8), 1551–1560.
14.
Ferry-Borges, J., and Castanheta, M. (1971). Structural safety. LNEC, Lisbon, Portugal.
15.
Floris, C. (1993a). “Load combinations for structural analysis: I.”Tech. Rep. 1/93, Dept. Struct. Engrg., Politecnico di Milano, Milan, Italy.
16.
Floris, C. (1993b). “Load combinations for structural analysis: II.”Tech. Rep. 2/93, Dept. Struct. Engrg., Politecnico di Milano, Milan, Italy.
17.
Floris, C., Colombo, A., Mazzucchelli, A., and Morello, M. (1991a). “Analisi statistica dei dati eolici in Milano centro.”Ingegneria del vento in Italia: Proc., IN-VENTO-90, G. Augusti et al., eds., Pitagora, Bologna, Italy, 187–196 (in Italian).
18.
Floris, C., Colombo, A., and Morello, M. (1991b). “Determinazione della PDF della pressione del vento.”Ingegneria del vento in Italia, Proc., IN-VENTO-90, G. Augusti et al., eds., Pitagora, Bologna, Italy, 197–208 (in Italian).
19.
Floris, C., and Giommi, C.(1991). “On stochastic load combination modeling and algorithms for calculating probability of failure.”Proc., CERRA-ICASP 6 Int. Conf., L. Esteva and S. E. Ruiz, eds., Mexico City, Mexico, 2, 630–635.
20.
Gaver, D. P., and Jacobs, P. A.(1981). “On combinations of random loads.”SIAM J. Appl. Math., 40(3), 454–466.
21.
Harris, M. E., Corotis, R. B., and Bova, C. J.(1981). “Area-dependent processes for structural live loads.”J. Struct. Div., ASCE, 107(5), 857–872.
22.
Hasofer, A. M.(1974). “Time dependent maximum of floor live loads.”J. Engrg. Mech. Div., ASCE, 100(5), 1086–1091.
23.
Hu, S.-L. J.(1991). “Probabilistic independence and joint cumulants.”J. Engrg. Mech., ASCE, 117(3), 640–652.
24.
Ibrahim, R. A., Soundararajan, A., and Heo, H.(1985). “Stochastic response of nonlinear dynamic systems based on a non-Gaussian closure.”J. Appl. Mech., 52(3), 965–970.
25.
Jaria, V., and Corotis, R. B.(1979). “Sum of independent gamma live load model.”J. Struct. Div., ASCE, 105(8), 1701–1705.
26.
Kanda, J.(1983). “Reliability of gust response prediction considering height dependent turbulence parameters.”J. Wind Engrg. Ind. Aerodyn., 14(5), 455–466.
27.
Kohno, M., and Sakamoto, J.(1991). “Exceedance probability of stochastic load combinations.”Proc., CERRA-ICASP 6th Int. Conf., L. Esteva and S. E. Ruiz, eds., Mexico City, Mexico, 2, 622–629.
28.
Larrabee, R. D. (1978). “Approximate stochastic analysis of combined loading.”Res. Rep. R78-28, Dept. of Civ. Engrg., MIT, Cambridge, Mass.
29.
Madsen, H. O. (1979). “Load models and load combinations.”Rep. No. R 113, Struct. Res. Lab., Technical University of Denmark, Lingby, Denmark.
30.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Methods of structural safety. Prentice Hall, Englewood Cliffs, N.J.
31.
Mc Guire, R. K., and Cornell, C. A.(1974). “Live load effects in office buildings.”J. Struct. Div., ASCE, 100(7), 1351–1366.
32.
Melchers, R. E.(1995). “Load space reliability formulation for Poisson pulse processes.”J. Engrg. Mech., ASCE, 121(7), 779–785.
33.
“Model code 1990.” (1991). CEB Bulletin No. 204, Comité Eurointernational du Béton, Paris, France.
34.
Muscolino, G., Ricciardi, G., and Vasta, M.(1997). “Stationary and non-stationary probability density functions for non-linear oscillators.”Int. J. Non-Linear Mech., 32(6), 1051–1064.
35.
Parzen, E. (1962). Stochastic processes. Holden Day, San Francisco, Calif.
36.
Peir, J. C., and Cornell, C. A.(1973). “Spatial and temporal variability of live loads.”J. Struct. Div., ASCE, 99(5), 903–922.
37.
Rackwitz, R. (1993). “Combination of non-stationary rectangular wave renewal processes.”Proc., ICOSSAR '93 Conf., Vol. 2, G. I. Schuëller et al., eds., A. A. Balkema, Rotterdam, The Netherlands.
38.
Reed, D. A.(1987). “Use of field parameters in wind engineering design.”J. Struct. Engrg., ASCE, 113(7), 1570–1585.
39.
Schuëller, G. I., Hirtz, H., and Booz, G.(1983). “The effect uncertainties in wind load estimation on reliability assessments.”J. Wind Engrg. Ind. Aerodyn., 14, 15–26.
40.
Simiu, E., and Scanlan, R. H. (1986). Wind effects on structures, 2nd Ed., John Wiley & Sons, New York, N.Y.
41.
Sobczyk, K., and Trebicki, J.(1990). “Maximum entropy principle in stochastic dynamics.”Probabilistic Engrg. Mech., 5(3), 102–110.
42.
“Structural safety.” (1976). CEB Bullétin No. 112, Comité Eurointernational du Béton, Paris, France.
43.
Tichy, M. (1993). Applied methods of structural reliability. Kluwer Academic Publ., Dordrecht, The Netherlands.
44.
Wen, Y.-K.(1977). “Statistical combination of extreme loads.”J. Struct. Div., ASCE, 103(5), 1079–1093.
45.
Wen, Y.-K. (1990). Structural load modeling and combination for performance and safety evaluation. Elsevier, Amsterdam, The Netherlands.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Sep 1, 1998
Published in print: Sep 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.