Continuum Damage Mechanics-Based Model of Stochastic Damage Growth
Publication: Journal of Engineering Mechanics
Volume 124, Issue 9
Abstract
Structural damage accumulation is an intrinsically random phenomenon. Continuum damage mechanics seeks to express the aggregate effect of microscopic defects present within a material in terms of macroscopically defined quantities; this makes continuum damage mechanics well-suited to deal with random damage growth in the prelocalization stage. Growth of damage is a thermodynamically irreversible process where the evolution of the Helmholtz free energy is described by a random process. Under fairly general thermodynamic conditions, a set of stochastic differential equations are derived for random isotropic damage growth prior to the onset of localization. The notion that the current state of damage encapsulates the history of the entire process imparts a Markovian characteristic to the damage growth process. The stochastic differential equations are solved to assess damage growth and reliability for uniaxial ductile deformation, high-temperature creep, and fatigue cycling. The models are validated with available experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barsom, J. M., and Rolfe, S. T. (1987). Fracture and fatigue control in structures. Prentice-Hall, Inc., Englewood Cliffs, N.J.
2.
Bhattacharya, B. (1997). “A damage mechanics based approach to structural deterioration and reliability,” PhD thesis, Johns Hopkins Univ., Baltimore, Md.
3.
Bhattacharya, B., and Ellingwood, B. R. (1996). “A CDM-based approach to stochastic damage growth.”Proc., ASCE Specialty Conf. on Probabilistic Mech., ASCE, New York, 772–775.
4.
Boyer, H. E. (1987). Atlas of stress-strain curves. ASM International, Materials Park, Ohio.
5.
Breysse, D.(1990). “Probabilistic formulation of damage-evolution law of cementitious composites.”J. Engrg. Mech., ASCE, 116(7), 1489–1510.
6.
Callen, H. B. (1985). Thermodynamics and an introduction to thermostatics. John Wiley & Sons, Inc., New York, N.Y.
7.
Carmeliet, J., and Hens, H.(1994). “Probabilistic nonlocal damage model for continua with random field properties.”J. Engrg. Mech., ASCE, 120(10), 2013–2027.
8.
Chaboche, J. L.(1988). “Continuum damage mechanics—I and II.”J. Appl. Mech., 55, 59–72.
9.
Chopra, O. K., et al. (1995). “Environmentally assisted cracking in light water reactors.”Rep. No. NUREG/CR-4667, U.S. Nuclear Regulatory Commission, Washington, D.C.
10.
Chow, C. L., and Wei, Y.(1991). “A model of continuum damage mechanics for fatigue failure.”Int. J. Fracture, 50(4), 301–316.
11.
Davis, J. R. (1993). Aluminum and aluminum alloys. ASM International, Materials Park, Ohio.
12.
Davis, J. R. (1994). Stainless steels. ASM International, Materials Park, Ohio.
13.
Diao, X.(1995). “A statistical equation of damage evolution.”Engrg. Fracture Mech., 52(1), 33–42.
14.
Dowling, N. E. (1993). Mechanical behavior of materials. Prentice-Hall, Inc., Englewood Cliffs, N.J.
15.
Gardiner, C. W. (1985). Handbook of stochastic methods for physics, chemistry and the natural sciences. Springer-Verlag New York, Inc., New York, N.Y.
16.
Garofalo, R. W.(1961). “Creep and creep-rupture relationships in an austenitic stainless steel.”Trans. Metallurgical Soc. of AIME, 221, 310–319.
17.
Hansen, N. R., and Schreyer, H. L.(1994). “A thermodynamically consistent framework for theories of elastoplasticity coupled with damage.”Int. J. Solids and Struct., 31(3), 359–389.
18.
Harlow, D. G., and Delph, T. J.(1995). “A computational probabilistic model for creep-damaging solids.”Computers and Struct., 54(1), 161–166.
19.
Kachanov, L. M. (1986). Introduction to continuum damage mechanics. Martinus Nijhoff Publishers, Dordrecht, The Netherlands.
20.
Kandarpa, S., Kirkner, D. J., and Spencer, B. F.(1996). “Stochastic damage model for brittle materials subjected to monotonic loading.”J. Engrg. Mech., ASCE, 122(8), 788–795.
21.
Keisler, J., Chopra, O. K., and Shack, W. J. (1994). “Statistical analysis of fatigue strain-life data for carbon and low-alloy steels.”Rep. No. NUREG/CR-6237, ANL-94/21, Argonne Nat. Lab., Argonne, Ill.
22.
Krajcinovic, D.(1984). “Continuum damage mechanics.”Appl. Mech. Rev., 37(1), 1–6.
23.
Krajcinovic, D., and Mastilovic, S.(1995). “Some fundamental issues of damage mechanics.”Mech. of Mat., 21(3), 217–230.
24.
Krajcinovic, D., and Silva, M. A. G.(1982). “Statistical aspects of the continuous damage theory.”Int. J. Solids and Struct., 18(7), 551–562.
25.
Krajcinovic, D., and Sumarac, D. (1987). “Micromechanics of the damage process.”Continuum damage mechanics theory and applications, D. Krajcinovic and J. Lemaitre, eds., Springer-Verlag New York, Inc., New York, N.Y.
26.
Lemaitre, J.(1985). “A continuum damage mechanics model for ductile fracture.”J. Engrg. Mat. and Technol., 107(1), 83–89.
27.
Lemaitre, J. (1992). A course on damage mechanics. Springer-Verlag New York, Inc., New York, N.Y.
28.
Majumdar, S., Chopra, O. K., and Shack, W. J. (1993). “Interim failure design curves for carbon, low-alloy, and austenitic stainless steels in LWR environments.”Proc., 20th Water Reactor Safety Information Meeting, Report NUREG/OP-0126, Vol. 3, U.S. Nuclear Regulatory Commission, Washington, D.C.
29.
Ostoja-Starzewski, M. (1989). “Damage in a random microstructure: Size effects, fractals and entropy maximization.”Appl. Mech. Rev., 42(11), S202–S212.
30.
Qian, Z., Takezono, S., and Tao, K.(1996). “A nonlocal damage mechanics approach to high temperature fatigue crack growth.”Engrg. Fracture Mech., 53(4), 535–543.
31.
Sears, S. F., and Salinger, G. L. (1975). Thermodynamics, kinetic theory and statistical thermodynamics. Addison-Wesley Publishing Co., Reading, Mass.
32.
Virkler, D. A., Hillberry, B. M., and Goel, P. K.(1979). “The statistical nature of fatigue crack propagation.”J. Engrg. Mat. and Technol., 101(2), 148–153.
33.
Woo, C. W., and Li, D. L.(1992). “A general stochastic dynamic model of continuum damage mechanics.”Int. J. Solids and Struct., 29(23), 2921–2932.
34.
Woo, C. W., and Li, D. L.(1993). “Statistical analysis of material damage with changing internal structure.”Engrg. Fracture Mech., 45(2), 245–254.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Sep 1, 1998
Published in print: Sep 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.