On the Determination of Bifurcation and Limit Points
Publication: Journal of Engineering Mechanics
Volume 124, Issue 8
Abstract
Necessary and sufficient conditions for the occurrence of a bifurcation in the equilibrium path of a discrete structural system are established as a consequence of the degeneracy of the solution of the rate problem at a critical point. Such result is based on the properties of the elastic-plastic rate problem formulated as a linear complementarity problem (LCP) in terms of plastic multipliers (the moduli of the plastic strain rate vectors) as basic unknowns. The conditions here given allow to distinguish, both theoretically and practically, among bounded bifurcations, unbounded bifurcations, limit points, and unloading points. All of the needed quantities depend either on the starting situation or on the actual known term increment; there is no need to compute eigenvalues or eigenvectors of stiffness matrices. The results obtained can be seen as a refinement, for the discrete elastic-plastic problem, of the uniqueness theory given by Hill. The refinement allows covering the case of vector-valued yield functions and clearly distinguishing, in operative terms, between different types of critical/limit points.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P., and Cedolin, L. (1991). Stability of structures. Elastic, inelastic, fracture, and damage theories. Oxford Univ. Press, New York.
2.
Corradi, L.(1978). “Stability of discrete elastic-plastic structures with associated flow laws.”SM Archives, 3(3), 201–259.
3.
Cottle, R. W.(1964). “Note on a fundamental theorem in quadratic programming.”J. Soc. Indust. Appl. Math., 12(3), 663–665.
4.
Franchi, A., and Cohn, M. Z.(1980). “Computer analysis of elastic-plastic structures.”Comp. Meth. Appl. Mech. Engrg., 21(3), 271–294.
5.
Franchi, A., and Genna, F.(1987). “A numerical scheme for integrating the rate plasticity equations with an “a priori” error control.”Comput. Meth. Appl. Mech. Engrg., 60, 317–342.
6.
Gale, D. (1960). The theory of linear economic models. McGraw-Hill Inc., New York.
7.
Hill, R.(1958). “A general theory of uniqueness and stability in elastic/plastic solids.”J. Mech. Phys. Solids, 7, 236–249.
8.
Hill, R.(1959). “Some basic principles in the mechanics of solids without a natural time.”J. Mech. Phys. Solids, 7, 209–225.
9.
Hill, R. (1961). “Bifurcation and uniqueness in nonlinear mechanics of continua.” Muskhelishvili Volume, Soc. Ind. Appl. Math., Philadelphia, Pa., 155–164.
10.
Hutchinson, J. W.(1973). “Post-bifurcation behavior in the plastic range.”J. Mech. Phys. Solids, 21, 191–204.
11.
Hutchinson, J. W. (1974). “Plastic buckling.”Advances in applied mechanics, C.-S. Yih, ed., Vol. 14, Academic Press, Inc., New York, 67–144.
12.
Lemke, C. E. (1967). “On complementary pivot theory.”R. P. I. Math. Rep. No. 76, Rensselaer Polytechnic Inst., Troy, N.Y., 95–114.
13.
Maier, G.(1970). “A matrix structural theory of piecewise linear elasto-plasticity with interacting yield planes.”Meccanica, 5, 54–66.
14.
Mangasarian, O. L. (1969). Nonlinear programming. McGraw-Hill Inc., New York.
15.
Sewell, M. J. (1972). “A survey of plastic buckling.”Stability, H. Leipholz, ed., Chap. 5, Univ. of Waterloo Press, Ont., Canada, 85–197.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Aug 1, 1998
Published in print: Aug 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.