Energy Approach to Rock Slope Stability Analysis
Publication: Journal of Engineering Mechanics
Volume 124, Issue 4
Abstract
Rock slope stability analyses for plane and wedge slides have been widely used for the last thirty years. Given certain assumptions, the distribution of normal forces among the contact planes is statistically determinate for plane and wedge slides, and the resisting and driving forces and the factor of safety may be calculated by limiting equilibrium methods. Certain geologic environments, however, produce potential failures on curved failure surfaces that cannot be modeled as either plane or wedge slides. Standard rock stability analysis methods presently available are not adequate to treat these rock slopes with curved sliding surfaces. This paper presents an energy approach that can analyze the stability of a rock block with any number of contact planes or a curved contact surface.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arwood, S. M. (1996). “An energy model for rock slope stability analysis,” MS thesis, Dept. Civ. and Envir. Engrg., University of Tennessee, Knoxville, Tenn.
2.
Barton, N. R., Bandis, S., and Bakhtar, K.(1985). “Strength, deformation and conductivity coupling of rock joints.”Int. J. Rock Mech. Min. & Geomech. Abstr., 22, 121–140.
3.
Brady, B. H. G., and Brown, E. T. (1993). Rock mechanics for underground mining, 2nd Ed., Chapman & Hall, Ltd., London, England.
4.
Chan, H. C., and Einstein, H. H.(1981). “Approach to complete limit equilibrium analysis for rock wedges—the method of artificial supports.”Rock Mech., 14, 59–86.
5.
Desai, C. S. (1979). Elementary finite element method. Prentice-Hall, Inc., Englewood Cliffs, N.J.
6.
Franklin, J. A., and Dusseault, M. B. (1989). Rock engineering, McGraw-Hill, Inc., New York, N.Y.
7.
Goodman, R. E. (1976). Methods of geological engineering in discontinuous rocks. West Publishing Co., St. Paul, Minn.
8.
Goodman, R. E. (1989). Introduction to rock mechanics, 2nd Ed., John Wiley & Sons, Inc., New York, N.Y.
9.
Herget, G. (1988). Stresses in rock. A. A. Balkema, Rotterdam, The Netherlands.
10.
Hoek, E., and Bray, J. (1981). Rock slope engineering. Institute of Mining and Metallurgy, London, England.
11.
John, K. W.(1968). “Graphical stability analysis of slopes in folded rocks.”Proc., ASCE, ASCE, 94(2), 47–52.
12.
Londe, P., Vigier, G., and Vormeringer, R.(1969). “Stability of rock slopes, a three-dimensional study.”Proc., ASCE, ASCE, 95(1), 235–262.
13.
Londe, P., Vigier, G., and Vormeringer, R.(1970). “Stability of rock slopes&mdashρaphical methods.”Proc., ASCE, ASCE, 96(4), 1411–1434.
14.
Mauldon, M., and Ureta, J. (1995). “Sliding stability of prismatic blocks.”Rock Mechanics, Proc., 35th US Symp., A. A. Balkema, Rotterdam, The Netherlands, 39–44.
15.
Mauldon, M., and Ureta, J.(1996). “Stability analysis of rock wedges with multiple sliding surfaces.”Geotech. and Geological Engrg., London, England, 14, 51–66.
16.
Ramsay, J. G. (1967). Folding and fracturing of rocks. McGraw-Hill, Inc., New York, N.Y.
17.
Ramsay, J. G., and Huber, M. I. (1987). The techniques of modern structural geology, Vol. 2: Folds and fractures. Academic Press, Inc., San Diego, Calif.
18.
Spiegel, M. R. (1968). Mathematical handbook of formulas and tables. McGraw-Hill Inc., New York, N.Y.
19.
St. John, C. M. (1971). “Three dimensional analysis of jointed rock slopes.”Proc. Int. Symp. of Rock Mechanics, Nancy, France.
20.
Turner, A. K., and Schuster, R. L. (1996). “Landslides, investigation and mitigation.”Transp. Res. Board Special Rep. 247, National Academy Press, Washington, D.C.
21.
Ureta, J. A. (1994). “Stability analysis of prismatic rock blocks,” MS thesis, Dept. Civ. and Envir. Engrg., University of Tennessee, Knoxville, Tenn.
22.
Whitten, E. H. T. (1966). Structural geology of folded rocks. Rand McNally & Co., Chicago, Ill.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 124 • Issue 4 • April 1998
Pages: 395 - 404
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Apr 1, 1998
Published in print: Apr 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.