Numerical Integrators for Elastic-Secondary Creep
Publication: Journal of Engineering Mechanics
Volume 123, Issue 7
Abstract
A method has been developed for building error maps to present the accuracy of time-dependent inelastic material models similar to the error maps used for time-independent plasticity. The elastic-secondary creep constitutive model with a Norton creep behavior is used throughout the paper to illustrate the method. It is noted that this is very simple unified creep-plasticity model with no internal state variables, i.e., no back stress or change in the drag stress. The error maps for nine integrators, which are used or have been proposed to be used for creep or unified creep-plasticity models, are then presented. Included are an explicit Euler integrator, explicit Runge-Kutta methods of second, third, and fourth orders, three implicit integrators, and two integrators, which have been specially designed for this equation. A quantitative measure of the accuracy of an integrator is also defined and applied to the nine integrators. A special integrator for the equation was found to be best and the Euler method ranked sixth. Other considerations for choosing an optimum integrator is also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abramowitz, A., and Stegun, I. A. (1964). Handbook of mathematical functions. Nat. Bureau of Standards, U.S. Govt. Printing Ofc., Washington, D.C., 887.
2.
Banthia, V., and Mukherjee, S. (1982). “Improved time integration scheme for stiff constitutive models of inelastic deformation.”ER-45055-5, Dept. of Energy.
3.
Bodner, S. R., and Partom, Y.(1975). “Constitutive equations for elastic-viscoplastic strain hardening materials.”ASME J. Appl. Mech., 42, 385–389.
4.
Caillaud, J. B., and Padmanabhan, L.(1971). “An improved semi-implicit Runge-Kutta method for stiff equations.”Chemical Engrg. J., 2, 227–232.
5.
Flanagan, D. P., and Taylor, L. M.(1987). “A numerical algorithm for the accurate integration of stress under finite rotations.”Comp. Methods in Appl. Mech. and Engrg., 62, 305–320.
6.
Gittus, J. H.(1971). “The mechanical equation of state for dislocation creep due to stresses varying in magnitude and direction.”Philosophical Magazine, 24, 1423–1430.
7.
Haisler, W. E., and Imbrie, P. K. (1984). “Numerical considerations in the development and implementation of constitutive models.”NASA Conf. Publ. 2369—Nonlinear Constitutive Relations for High Temperature Application, Nat. Aeronautics and Space Admin., Washington, D.C.
8.
Hart, E. W., Li, C. Y., Yamada, H., and Wire, G. L. (1975). “Phenomenological theory: a guide to constitutive relations and fundamental deformation properties.”Constitutive equations in plasticity, A. S. Argon, ed., MIT Press, Cambridge, Mass., 149–198.
9.
Johnson, G. C., and Bammann, D. J.(1984). “On the analysis of rotation and stress rate in deforming bodies.”Int. J. Solids and Structures, 20(8), 217–232.
10.
Krieg, R. D. (1977). “Numerical integration of some new unified plasticity-creep formulations.”Proc., 4th Int. Conf. on Struct. Mech. in Reactor Technol., Paper No. M6/4, Commission of the European Communities, Luxembourg.
11.
Krieg, R. D. (1983). “Implementation of creep equations for a metal into a finite element computer program.”Computer methods for nonlinear solids and structural mechanics, S. N. Atluri and N. Perrone, eds., ASME Publ. AMD—Vol. 54, New York, N.Y., 133–144.
12.
Krieg, R. D., and Krieg, D. B.(1977). “Accuracies of numerical solution methods for the time independent elastic-plastic model.”J. Pressure Vessel and Piping Technol., 99, 510–515.
13.
Krieg, R. D., Swearengen, J. C., and Jones, W. B. (1987). “A physically based internal variable model for rate dependent plasticity.”Unified constitutive equations for creep and plasticity, A. K. Miller, ed., Elsevier Science Publishing Co., Inc., New York, N.Y., 248–251.
14.
Kumar, V., Morjaria, M., and Mukherjee, S.(1980). “Numerical integration of some stiff constitutive models of inelastic deformation.”ASME J. Engrg. Mat. and Technol., 102(1), 92–96.
15.
Miller, A. K. (1975). “A unified phenomenological model for the monotonic, cyclic, and creep deformation of strongly work-hardening materials,” PhD thesis, Stanford Univ., Palo Alto, Calif.
16.
Miller, A. K., and Tanaka, T. G.(1988). “NONSS: a method for integrating unified constitutive equations under complex histories.”J. Engrg. Mat. Technol., 110, 205–211.
17.
Schreyer, H. L., Kulak, R. F., and Kramer, J. M.(1979). “Accurate numerical solutions for elastic-plastic models.”ASME J. Pressure Vessel Technol., 101, 226–230.
18.
Tanaka, T. G. (1983). “A unified numerical method for integrating stiff time-dependent constitutive equations for elastic/viscoplastic deformation of metals and alloys,” PhD thesis, Dept. Mat. Sci. Engrg., Stanford Univ.
19.
Walker, K. P. (1976). “An implicit functional theory of viscoplasticity,” PhD thesis, Rensselaer Polytechnic Inst., Troy, N.Y.
20.
Walker, K. P. (1980). “Representation of hastelloy—X behavior at elevated temperature with a functional theory of viscoplasticity.”Proc., ASME/Pressure Vessel and Piping Century Two Emerging Technol. Conf., San Francisco, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jul 1, 1997
Published in print: Jul 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.