Young's Modulus Interpreted from Compression Tests with End Friction
Publication: Journal of Engineering Mechanics
Volume 123, Issue 1
Abstract
This paper derives an approximate expression for the true Young's modulus of a solid circular cylinder under compression between two end blocks with friction, provided that the Poisson's ratio is known. The conventional method of evaluating the Young's modulus assumes that uniform stress and deformation fields exist inside the specimen. However, if friction exists between the loading platens and the end surfaces of the specimen, a correction factor must be applied to the apparent Young's modulus. A correction factor with calculable error is obtained through the use of the Prager-Synge function space concept. The amount of friction is quantified by proposing a measurable parameter to model partial slip conditions. Numerical results show that the correction factor increases with both the slenderness ratio and the Poisson's ratio; these observations agree qualitatively with Filon's classical result. For the cases of partial slip, tables are provided for quick calculation of the correction factor.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al-Chalabi, M.(1972). “Discussion of `On stresses within elastic cylinders loaded uniaxially and triaxially' by S. D. Peng.”Int. J. Rock Mech. Min. Sci. and Geomech. Abstracts, 9, 665.
2.
Al-Chalabi, M., and Huang, C. L.(1974). “Stress distribution within circular cylinders in compression.”Int. J. Rock Mech. Min. Sci. and Geomech. Abstracts, 11, 45–56.
3.
Al-Chalabi, M., McCormick, F. J., and Huang, C. L.(1974). “Strain distribution within compressed circular cylinders.”Experimental Mech., 14, 497–501.
4.
Balla, A.(1960a). “A new solution of the stress conditions in triaxial compression.”Acta Tech. Hungary, 28, 349–387.
5.
Balla, A.(1960b). “Stress conditions in triaxial compression.”J. Soil Mech. and Found. Div., ASCE, 86(6), 57–84.
6.
Brady, B. T.(1971). “An exact solution to the radially end-constrained circular cylinder under triaxial loading.”Int. J. Rock Mech. Min. Sci., 8, 165–178.
7.
Edelman, F.(1949). “On the compression of a short cylinder between rough end-blocks.”Quarterly Appl. Mathematics, 7, 334–337.
8.
Filon, L. N. G.(1902). “On the equilibrium of circular cylinders under certain practical systems of load.”Philosophical Trans. Royal Soc., London, England, Ser. A, 198, 147–233.
9.
Goodman, R. E. (1989). Introduction to rock mechanics, 2nd Ed., John Wiley & Sons, Inc., New York, N.Y.
10.
Greenberg, H. J., and Truell, R.(1948). “On a problem in plane strain.”Quarterly Appl. Mathematics, 6, 53–62.
11.
Lambe, T. W., and Whitman, R. V. (1979). Soil Mechanics (SI version). John Wiley & Sons, Inc., New York, N.Y.
12.
Neville, A. M. (1975). Properties of Concrete, 2nd Ed., Pitman Publishing, Ltd., London, England.
13.
Peng, S. D.(1971). “Stresses within elastic circular cylinders loaded uniaxially and triaxially.”Int. J. Rock Mech. Min. Sci., 8, 339–432.
14.
Peng, S. D.(1973). “Closure to `On stresses within elastic cylinders loaded uniaxially and triaxially.”' Int. J. Rock Mech. Min. Sci. and Geomech Abstracts, 10, 761–762.
15.
Pickett, G. (1944). “Application of the Fourier method to the solution of certain boundary problems in the theory of elasticity.”J. Appl. Mech., 66, A176–A182.
16.
Prager, W., and Synge, J. L.(1947). “Approximations in elasticity based on the concept of function space.”Quarterly Appl. Mathematics, 5, 241–269.
17.
Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T. (1992). Numerical recipes: the art of scientific computing, 2nd Ed., Cambridge Univ. Press, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Jan 1, 1997
Published in print: Jan 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.