Softening-Induced Dynamic Localization Instability: Seismic Damage in Frames
Publication: Journal of Engineering Mechanics
Volume 122, Issue 12
Abstract
This paper analyzes dynamic localization of damage in structures with softening inelastic hinges and studies implications for the seismic response of reinforced concrete or steel frames of buildings or bridges. First, the theory of limit points and bifurcation of the symmetric equilibrium path due to localization of softening damage is reviewed. It is proven that, near the state of static bifurcation or near the static limit point, the primary (symmetric) path of dynamic response or periodic response temporarily develops Liapunov-type dynamic instability such that imperfections representing deviations from the primary path grow exponentially or linearly while damage in the frame localizes into fewer softening hinges. The implication for seismic loading is that the kinetic energy of the structure must be absorbed by fewer hinges, which means faster collapse. The dynamic localizations are demonstrated by exact analytical solutions of torsional rotation of the floor of a symmetric and symmetrically excited frame, and of horizontal shear excitation of a building column. Static bifurcations with localization are also demonstrated for a portal frame, a multibay frame, and a multibay-multistory frame. The widely used simplification of a structure as a single-degree-of-freedom oscillator becomes invalid after the static bifurcation state is passed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P.(1976). “Instability, ductility and size effect in strain-softening concrete.”J. Engrg. Mech., ASCE, 102(2), 331–44.
2.
Bažant, Z. P.(1988). “Stable states and paths of structures with plasticity or damage.”J. Engrg. Mech., ASCE, 114(12), 2013–2034.
3.
Bažant, Z. P., and Cedolin, L. (1991). Stability of structures: elastic, inelastic, fracture and damage theories . Oxford University Press, New York, N.Y.
4.
Bažant, Z. P., and Cedolin, L.(1993). “Why direct tension specimens break flexing to the side.”J. Struct. Engrg., ASCE, 119(4), 1101–1113.
5.
Bažant, Z. P., and Kazemi, M. T. (1994). “Localization of softening damage in frames and implications for earthquake resistance.”Proc., 5th U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engrg. Res. Inst., Oakland, Calif., Vol. 1, 313–322.
6.
Bažant, Z. P., Pan, J.-Y., and Pijaudier-Cabot, G.(1987a). “Softening in reinforced concrete beams and frames.”J. Struct. Engrg., ASCE, 113(12), 2333–2347.
7.
Bažant, Z. P., Pijaudier-Cabot, G., and Pan, J.-Y.(1987b). “Ductility, snapback, size effect and redistribution in softening beams and frames.”J. Struct. Engrg., ASCE, 113(12), 2348–2364.
8.
Borrè, G., and Maier, G.(1989). “On linear versus nonlinear flow rules in strain localization analysis.”Meccanica, Italy, 24(1), 36–41.
9.
Chopra, A. K. (1995). Dynamics of structures: theory and applications to earthquake engineering . Prentice-Hall, Inc., Englewood Cliffs, N.J.
10.
de Borst, R.(1989). “Numerical methods for bifurcation analysis in geomechanics.”Appl. Mech. (Ingenieur-Archiv), Berlin, Germany, 59, 160–74.
11.
Delallera, J. C., and Chopra, A. K.(1994). “Accidental torsion in buildings due to base rotational excitation.”Earthquake Engrg. and Struct. Dynamics, 23(9), 1003–1021.
12.
Delallera, J. C., and Chopra, A. K.(1995). “Understanding the inelastic seismic behavior of asymmetric plan buildings.”Earthquake Engrg. and Struct. Dynamics, 24(4), 549–572.
13.
Guckenheimer, J., and Holmes, P. (1983). Nonlinear oscillations, dynamical systems, and bifurcations of vector fields . Springer-Verlag, Berlin, Germany.
14.
Hunt, G. W., and Baker, G.(1995). “Principles of localization in the fracture of quasi-brittle structure.”J. Mech. and Phys. of Solids, 43(7), 1127–1150.
15.
Leroy, Y., and Ortiz, M.(1989). “Finite element analysis of strain localization in frictional materials.”Int. J. Numer. and Anal. Methods in Geomech., 13, 53–74.
16.
Maier, G. (1971). “Instability due to strain softening.”Stability of Continuous Systems, Proc., IUTAM Symp., Springer-Verlag, Berlin, Germany, 411–417.
17.
Maier, G., and Zavelani, A.(1970). “Sul comportamento di aste metalliche compresse eccentricamente. Indagine sperimentale e considerazioni teoriche,”Costruzioni Metalliche, 22(4), 282–297.
18.
Maier, G., Zavelani, A., and Dotreppe, J. C.(1973). “Equilibrium branching due to flexural softening.”J. Engrg. Mech., ASCE, 99(4), 897–901.
19.
Rots, J. G., and de Borst, R.(1989). “Analysis of concrete fracture in direct tension.”Int. J. Solids and Struct., 25(12), 1381–1394.
20.
Runesson, K., Larsson, R., and Sture, S.(1989). “Characteristics and computational procedure in softening plasticity.”J. Engrg. Mech., ASCE, 115(8), 1628–46.
21.
“Seismic design guidelines for essential buildings.” (1986). Rep. DA-TM-5-809-10-1, Dept. of Army, Navy and Air Force, Washington, D.C.
22.
Stolz, C. (1989). “On some aspect of stability and bifurcation in fracture and damage mechanics.”Cracking and damage: strain localization and size effect, J. Mazars and Z. P. Bažant, eds., Elsevier, London, England, 207–216.
23.
Wiggins, S. (1990). Introduction to applied nonlinear dynamical systems and chaos . Springer-Verlag, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Dec 1, 1996
Published in print: Dec 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.