Buckling and Vibration of Thick Laminates on Pasternak Foundations
Publication: Journal of Engineering Mechanics
Volume 122, Issue 1
Abstract
This paper investigates buckling, free vibration, and vibration with initial in-plane loads for moderately thick, simply supported symmetric cross-ply rectangular laminates on Pasternak foundations. The total potential energy functional is derived based on the first-order shear deformation plate theory. The differential equations, which govern the vibration and buckling behavior of the plate are then derived from the potential energy functional. Employing the Navier solution procedure, closed-form buckling and vibration solutions have been obtained and are presented in tables and figures. Extensive parametric studies have been carried out to investigate the effects of plate geometry, in-plane load ratio, and foundation parameters on the buckling and vibration behavior of the plate system. Sets of first-known closed-form buckling and vibration results are presented for simply supported symmetric cross-ply laminates on Pasternak foundations. These results may be useful to engineers in engineering practice and to researchers in checking numerical models.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bert, C. W.(1979). “Recent research in composite and sandwich plate dynamics.”Shock and Vibration Dig., 11(10), 13–23.
2.
Bert, C. W.(1982). “Research on dynamics of composite and sandwich plates, 1979–81.”Shock and Vibration Dig., 14(10), 17–34.
3.
Bert, C. W.(1985). “Research on dynamic behavior of composite and sandwich plates-IV.”Shock and Vibration Dig., 17(11), 3–25.
4.
Bert, C. W.(1991). “Research on dynamic behavior of composite and sandwich plates-V: part I.”Shock and Vibration Dig., 23(6), 3–14.
5.
Bhaskar, A., and Dumir, P. C.(1988). “Non-linear vibration of orthotropic thin rectangular plates on elastic foundations.”J. Sound and Vibration, 125(1), 1–11.
6.
Biswas, P.(1978). “Vibrations of irregular-shaped orthotropic plates resting on elastic foundation under inplane forces.”J. Indian Inst. of Sci., 60(1), 73–38.
7.
Bowlus, J. A., Palazotto, A. N., and Whitney, J. M.(1987). “Vibration of symmetrically laminated rectangular plates considering deformation and rotatory inertia.”AIAA J., 25(11), 1500–1511.
8.
Dawe, D. J., and Craig, T. J.(1986). “The vibration and stability of symmetrically-laminated composite rectangular plates subjected to in-plane stresses.”Composite Struct., 5(4), 281–307.
9.
Dawe, D. J., and Peshkam, V. (1990). “A buckling analysis capability for use in the design of composite prismatic plate structures.”Optimum design of composite structures, I. H. Marshall and E. Demuts, eds., Elsevier Applied Science, London, England, 33–63.
10.
Deng, L. B. (1993). “Vibration of laminated plates clamped at four edges resting on Winkler-Pasternak foundations.”Acta Materiae Compositae Sinica, 10(4), 49–56 (in Chinese).
11.
Dyrbye, C. (1978). “Review of `Vibrations of irregular-shaped orthotropic plates resting on elastic foundation under inplane forces.”' Appl. Mech. Rev., 31(12), 1726.
12.
Ercoli, L., and Laura, P. A. A.(1987). “Fundamental frequencies of orthotropic plates elastically restrained against rotation along the edges and subjected to in-plane forces.”J. Sound and Vibration, 113(1), 190–193.
13.
Eslami, H., and Kandil, A. O. (1987). “A perturbation method for nonlinear forced vibration of orthotropic rectangular plates with in-plane loads.”Proc., 28th Struc., Struc. Dynamic Mat. Conf., Vol. 2A, Am. Inst. of Aeronautics and Astronautics (AIAA), New York, N.Y., 522–532.
14.
Fisher, C. A., Ewing, M. S., and Leissa, A. W. (1987). “Vibrations of unsymmetrical laminated plates subjected to in-plane initial stresses.”Comp. Struc., 4, Proc., 4th Int. Conf. on Comp. Struc., I. H. Marshall, ed., Elsevier Applied Science, London, England, 1, 1.461–1.475.
15.
Gbadeyan, J. A.(1990). “Lateral vibration analysis of an initially stressed rectangular thin plate on Pasternak elastic foundation.”Modelling, Simulation & Control B: Mech. & Thermal Engrg., Mat. & Resour., Chem., 27(3), 9–35.
16.
Kapania, R. K., and Byun, C. (1989). “Vibrations of laminated panels under complex inplane loads.”Vibration and behavior of composite structures, C. Mei, H. F. Wolfe, and I. Elishakoff, eds., ASME, New York, N.Y., AD-Vol. 14, 41–46.
17.
Kapania, R. K., and Raciti, S.(1989). “Recent advances in analysis of laminated beams and plates, part II: vibrations and wave propagation.”AIAA J., 27(7), 935–946.
18.
Laura, P. A. A., and Gutierrez, R. H.(1985). “Vibrating nonuniform plates on elastic foundation.”J. Engrg. Mech., ASCE, 111(9), 1185–1196.
19.
Leissa, A. W.(1977). “Recent research in plate vibrations: complicating effects.”Shock and Vibration Dig., 9(11), 21–35.
20.
Leissa, A. W.(1981). “Plate vibration research: 1976–1980: complicating effects.”Shock and Vibration Dig., 13(10), 19–36.
21.
Leissa, A. W.(1987). “Recent research in plate vibrations: 1981–1985. Part II: complicating effects.”Shock and Vibration Dig., 19(3), 10–24.
22.
Liew, K. M., Hung, K. C., and Lim, M. K.(1993a). “A continuum three-dimensional vibration analysis of thick rectangular plates.”Int. J. Solids and Struct., 30(24), 3357–3379.
23.
Liew, K. M., Xiang, Y., and Kitipornchai, S.(1993b). “Transverse vibration of thick rectangular plates—IV. Influence of isotropic in-plane pressure.”Comp. and Struct., 49(1), 69–78.
24.
Liew, K. M., Xiang, Y., Kitipornchai, S., and Wang, C. M.(1994). “Buckling and vibration of annular Mindlin plates with internal concentric ring supports subjected to in-plane radial pressure.”J. Sound and Vibration, 177(5), 689–707.
25.
Oyediran, A. A., and Gladeyan, J. A. (1986). “Vibration of a prestressed orthotropic rectangular thin plate via singular perturbation techniques.”Acta Mechanica, 64(3–4), 165–178.
26.
Roufaeil, O. L., and Dawe, D. J.(1982). “Rayleigh-Ritz vibration analysis of rectangular Mindlin plates subjected to membrane stresses.”J. Sound and Vibration, 85(2), 263–275.
27.
Schecter, R. S. (1967). The variational methods in engineering, McGraw-Hill Book Co., Inc., New York, N.Y.
28.
Shih, Y. S., and Blotter, P. T.(1993). “Non-linear vibration analysis of arbitrarily laminated thin rectangular plates on elastic foundations.”J. Sound and Vibration, 167(3), 433–459.
29.
Takahashi, K., and Sonoda, T. (1992). “Dynamic stability of a rectantular plate on Pasternak foundation subjected to sinusoidally time-varying in-plane load.”Theoretical and Appl. Mech., 41, Univ. of Tokyo Press, Tokyo, Japan, 55–62.
30.
Xiang, Y., Liew, K. M., Kitipornchai, S., and Wang, C. M.(1994a). “Vibration of triangular Mindlin plates subjected to isotropic in-plane stresses.”J. Vibration and Acoustics, 116(1), 61–66.
31.
Xiang, Y., Wang, C. M., and Kitipornchai, S.(1994b). “Exact vibration solution for initially stressed Mindlin plates on Pasternak foundation.”Int. J. of Mech. Sci., 36(4), 311–316.
32.
Yang, I. H., and Shieh, J. A.(1987). “Vibrations of initially stressed thick, rectangular orthotropic plates.”J. Sound and Vibration, 119(3), 545–558.
33.
Yang, P. C., Norris, C. H., and Stavsky, Y.(1966). “Elastic wave propagation in heterogeneous plates.”Int. J. Solids and Struct., 2(4), 665–684.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jan 1, 1996
Published in print: Jan 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.