Parallel Elastoplastic Models of Inelastic Material Behavior
Publication: Journal of Engineering Mechanics
Volume 121, Issue 10
Abstract
Parallel mathematical models are presented and analyzed as a basis for representing the mechanical behavior of inelastic materials. These models are developed within the framework of incremental elastoplasticity theory. The models are shown to simply represent strain hardening through the adjustment of internal stresses within internal elements of the model, to capture Bauschinger's effect during stress reversal, and to provide hysteretic loops in closed stress cycles. The models are shown to provide stable, nonassociated plastic flow for frictional materials such as geologic materials, i.e., to obey Drucker's stability postulate. A simple parallel model for rock is presented that gives the same response as a conventional elastoplastic material model when used to fit idealized uniaxial strain and triaxial compression test data. However, the two models give much different results in triaxial extension after initial hardening occurred on the compression side first. It is believed that this modeling concept holds significant promise for improving mathematical models of the inelastic mechanical behavior of a variety of engineering materials.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P., and Bhat, P. B. (1976). “Endochronic theory of inelasticity and failure of concrete.”J. Engrg. Mech. Div., ASCE, Vol. 102, 701–722.
2.
Chen, W-F., and Ting, E. C. (1980). “Constitutive models for concrete structures.”J. Engrg. Mech. Div., ASCE, Vol. 106, 1–19.
3.
Constitutive laws for engineering materials, theory and application; Proc., 2nd Int. Conf. of Constitutive Laws for Engrg. Mat.: Theory and Applications; Vols. I and II. (1987). C. S. Desai, E. Krempl, P. D. Kiousis, and T. Kundu, eds., Elsevier, New York, N.Y.
4.
Cundall, P. A., and Strack, O. D. L.(1979). “A discrete numerical model for granular assemblies.”Géotechnique, London, England, 29(1), 47–65.
5.
Desai, C. S., Krempl, E., Frantziskonis, G., and Saadatmanesh, H. (1991). “Constitutive laws for engineering materials.”Proc., 3rd Int. Conf. of Constitutive Laws for Engrg. Mat., Theory and Applications, ASME Press, New York, N.Y.
6.
DiMaggio, F. L., and Sandler, I. S. (1971). “Material model for granular soils.”J. Engrg. Mech. Div., ASCE, Vol. 97, 985–950.
7.
Drucker, D. C. (1959). “A definition of stable inelastic material.”J. Appl. Mathematics, Vol. 26, 101–106.
8.
Fung, Y. C. (1965). Foundations of solid mechanics . Prentice-Hall, Englewood Cliffs, N.J.
9.
Hill, R. (1956). The mathematical theory of plasticity . Oxford Univ. Press, Oxford, England, 8–24.
10.
Hodge, P. G. Jr. (1957). “Piecewise linear plasticity.”Proc., 9th Int. Congress on Appl. Mech., Univ. of Brussels, Brussels, Belgium, Vol. 8, 65–72.
11.
Inel, S. (1992). “Kinematic hardening model for sand behavior during large stress reversals,” PhD dissertation, UCLA Civ. Engrg. Dept., Los Angeles, Calif.
12.
Issa, J. A., and Nelson, R. B. (1992). “Numerical analysis of micromechanical behaviour of granular materials.”Engrg. Computations, Vol. 9, 211–223.
13.
Ju, J. W.(1989). “On energy-based coupled elastoplastic damage theories: constitutive modeling and computational aspects.”Int. J. Solids and Struct., 25(7), 803–833.
14.
Krieg, R. D. (1975). “A practical two-surface plasticity theory.”J. Appl. Mech., Vol. 42, 641–646.
15.
Lade, P. V., and Duncan, J. M. (1975). “Elastoplastic stress-strain theory for cohesionless soil.”J. Geotech. Engrg. Div., ASCE, Vol. 101, 1037–1053.
16.
Lade, P. V., and Musante, H. M. (1978). “Three-dimensional behavior of remolded clay.”J. Geotech. Engrg. Div., ASCE, Vol. 104, 193–209.
17.
Lade, P. V., Nelson, R. B., and Ito, Y. M.(1987). “Nonassociated flow and stability of granular materials.”J. Engrg. Mech., 113(9), 1302–1318.
18.
Lin, T. H. (1968). Theory of inelastic structures . Wiley, New York, N.Y.
19.
Mroz, A. (1963). “Non-associated flow rules in plasticity.”Journal de Mecanique, Paris, France, Vol. II, 21–42.
20.
Nayak, G. C., and Zienkiewicz, O. C.(1972). “Convenient form of stress invariants for plasticity.”J. Struct. Div., ASCE, 98(4), 949–954.
21.
Owen, D. R. J., Prakash, A., and Zienkiewicz, O. C. (1974). “Finite element analysis of non-linear composite materials by use of overlay systems.”Computers & Struct., Vol. 4, 1251–1267.
22.
Pande, G. N., Owen, D. R. J., and Zienkiewicz, O. C. (1977). “Overlay models in time-dependent nonlinear material analysis.”Computers & Struct., Vol. 7, 435–443.
23.
Prager, W. (1956). “A new method of analysing stresses and strains in work-hardening plastic solids.”J. Appl. Mech., Vol. 23, 493–496.
24.
Sandler, I. S., and Pucik, T. A. (1993). “Non-uniqueness in dynamic rate-independent non-associated plasticity.”Tech. Rep. DNA-TR-92-108, Defense Nuclear Agency, Alexandria, Va.
25.
Sandler, I. S., and Rubin, D. (1987). “The consequences of non-associated plasticity in dynamic problems.”Constitutive laws for engineering materials, theory and application, C. S. Desai, E. Krempl, P. D. Kiousis, and T. Kundu, eds., Vol. I, Elsevier, New York, N.Y., 345–352.
26.
Simo, J. C., and Ju, J. W.(1987). “Strain and stress based continuum damage models. I: formulation.”Int. J. Solids and Struct., 23(7), 821–840.
27.
Terzaghi, K. (1936). “The shearing resistance of saturated soils.”Proc., 1st Int. Conf. on Soil Mech., Grad. School of Engrg., Harvard Univ., Cambridge, Mass., Vol. 1, 54–56.
28.
Valanis, K. C. (1971). “A theory of viscoplasticity without a yield surface.”Archiwum Mechaniki Stossowanej, Poland, Vol. 23, 517–551.
29.
Ziegler, H. (1959). “A modification of Prager's hardening rule.”Quarterly of Appl. Mathematics, Vol. 17, 55–65.
30.
Zubelewicz, A., and Bažant, Z. P.(1987). “Interface element modeling of fracture in aggregate composites.”J. Engrg. Mech., 113(11), 1619–1631.
31.
Zienkiewicz, O. C., Nayak, G. C., and Owen, D. R. J. (1972). “Composite and overlay models in numerical analysis of elasto-plastic continua.”Int. Symp. Found. of Plasticity, Noordhoff International Publishers, Leiden, The Netherlands.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Oct 1, 1995
Published in print: Oct 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.