TPEA Device as Seismic Damper for High-Rise Buildings
Publication: Journal of Engineering Mechanics
Volume 121, Issue 10
Abstract
The tapered-plate energy absorber (TPEA) has been accepted as an effective energy dissipator to absorb earthquake-induced energy and improve seismic resistance of a structure. Previous analytical studies associated with the TPEA device were primarily based on simple methods to predict its behavior. In this study, a more complex model, based on plasticity theory, and a finite-element formulation for the TPEA device are developed. The proposed model predicts effectively the device behavior under wind and earthquake loadings. Analytical results obtained by the proposed model are in good agreement with the experimental observations from the tests of the TPEA devices. Furthermore, numerical simulations of a 10-story building equipped with TPEA devices and subjected to earthquake ground motions show that the energy-dissipation capacity of the structure increases, and that its responses to earthquake loadings are significantly reduced when the TPEA devices are employed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bergman, D. M., and Hanson, R. D. (1990). “Viscoelastic versus steel plate mechanical damping devices: an experimental comparison.”Proc., 4th U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engrg. Res. Inst., Oakland, Calif., Vol. III, 469–477.
2.
Chen, P. F.-S., and Powell, G. H. (1982). “Generalized plastic hinge concepts for 3D beam-column elements.”Rep. No. UCB/EERC-82/20, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley.
3.
Kelly, J. M., and Skinner, M. S. (1980). “The design of steel energy-absorbing restrainers and their incorporation into nuclear power plants for enhanced safety (Vol. 2): development and testing of restraints for nuclear piping system.”Rep. No. UCB/EERC-80/21, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley.
4.
Kelly, J. M., Skinner, M. S., and Beucke, K. E. (1980). “Experimental testing of an energy absorbing base isolation system.”Rep. No. UCB/EERC-80/35, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley.
5.
Mendelson, A. (1968). Plasticity: theory and application . Macmillan Co., New York, N.Y.
6.
Phillips, A., and Lee, C. W. (1979). “Yield surfaces and loading surfaces; experiments and recommendations.”Int. J. of Solids and Struct., Vol. 15, 715–729.
7.
Pong, W. S., Tsai, C. S., and Lee, G. C. (1994a). “Seismic study of buildings with added energy-absorbing devices.”Tech. Rep. NCEER-94-0016, Nat. Ctr. for Earthquake Engrg. Res., State Univ. of New York at Buffalo.
8.
Pong, W. S., Tsai, C. S., Tsai, K. C., and Lee, G. C. (1994b). “Parametric study of TPEA devices for high-rise buildings.”Proc., 1st World Conf. on Struct. Control, Inst. Assoc. for Struct. Control, Pasadena, Calif., wp3-33–wp3-42.
9.
Scholl, R. E. (1990). “Improve the earthquake performance of structures with added damping and stiffness elements.”Proc., 4th U.S. Nat. Conf. on Earthquake Engrg., Earthquake Engrg. Res. Inst., Oakland, Calif., Vol. III, 489–498.
10.
Skinner, R. I., Kelly, J. M., and Heine, A. J. (1975). “Hysteretic dampers for earthquake-resistant structures.”Int. J. Earthquake Engrg. Struct. Dyn., Vol. 3, 287–296.
11.
Steimer, S. F., and Chow, F. L. (1984). “Curved plate energy absorbers for earthquake resistant structures.”Proc. 8th World Conf. on Earthquake Engrg., Earthquake Engrg. Res. Inst., Oakland, Calif., Vol. V, 967–974.
12.
Steimer, S. F., Godden, W. G., and Kelly, J. M. (1981). “Experimental behavior of a spatial piping system with steel energy absorbers subjected to a simulated differential seismic input.”Rep. No. UCB/EERC-81/09, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley.
13.
Su, Y.-F., and Hanson, R. D. (1990). “Comparison of effective supplement damping: equivalent viscous and hysteretic.”Proc., 4th Nat. Conf. on Earthquake Engrg., Earthquake Engrg. Res. Inst., Oakland, Calif., Vol. III, 507–516.
14.
Tsai, C. S.(1993). “Innovative design of viscoelastic dampers for seismic mitigation.”Nuclear Engrg. and Design, 139(2), 165–182.
15.
Tsai, C. S.(1994). “Temperature effect of viscoelastic dampers during earthquakes.”J. Struct. Engrg., ASCE, 120(2), 394–409.
16.
Tsai, C. S., and Lee, H. H. (1992a). “Applications of viscoelastic damper to jointed structures for seismic mitigation.”Proc., 9th Engrg. Mech. Conf., ASCE, College Station, Tex., 685–688.
17.
Tsai, C. S., and Lee, H. H. (1992b). “Applications of viscoelastic dampers to bridges for seismic mitigation.”Proc., ASME Pressure Vessels and Piping Conf., ASME, New York, N.Y., PVP-Vol. 229, 113–118.
18.
Tsai, C. S., and Lee, H. H.(1993). “Applications of viscoelastic dampers to high-rise buildings.”J. Struct. Engrg., ASCE, 119(4), 1222–1233.
19.
Tsai, C. S., and Tsai, K. C. (1992). “ADAS devices for seismic mitigation of high-rise buildings.”Proc., Workshop on Base Isolation and Energy Dissipation Techniques for Struct., Taipei, Taiwan, R.O.C.
20.
Tsai, K. C., Chen, H. W, Hong, C. P., and Su, Y. F.(1993). “Design of steel triangular plate energy absorbers for seismic-resistant construction.”Earthquake Spectra, 9(3), 505–528.
21.
Tsai, K. C., and Hong, C. P. (1992). “Steel triangular plate energy absorbers for earthquake resistant buildings.”Proc., 1st World Conf. on Constructional Steel Design, Mexico, 529–538.
22.
Tsai, K. C., Hong, C. P., and Su, Y. F. (1992). “Experimental study of steel triangular plate energy absorbing device for seismic-resistant structures.”Rep. No., R81-08, Ctr. for Earthquake Engrg. Res., Nat. Taiwan Univ., Taipei, Taiwan, R.O.C. (in Chinese).
23.
Tseng, N. T., and Lee, G. C.(1983). “Simple plasticity model of two-surface.”J. Engrg. Mech., ASCE, 109(3), 795–810.
24.
Whittaker, A. S., Bertero, V. V., Alonso, L. J., and Thompson, C. (1989). “Earthquake simulator testing of steel plate added damping and stiffness elements.”Rep. No. UCB/EERC-89/02, Earthquake Engrg. Res. Ctr., Univ. of California at Berkeley.
25.
Xia, C., Hanson, R. D., and Wight, J. K. (1990). “A study of ADAS element parameters and their influence on earthquake response of building structures.”Rep. UMCE 90-12, Univ. of Michigan, Ann Arbor.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Oct 1, 1995
Published in print: Oct 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.