Fracture Energy Formulation for Inelastic Behavior of Plain Concrete
Publication: Journal of Engineering Mechanics
Volume 120, Issue 9
Abstract
A constitutive formulation is presented that covers the triaxial load‐response spectrum of plain concrete in tension as well as in shear. The elastoplastic concrete model resorts to an isotropic‐hardening description of the prepeak behavior and to a fracture energy‐based isotropic‐softening description of the post‐peak response. To control inelastic dilatancy, a nonassociated plastic flow rule is adopted in regard to the inelastic volume change. The constitutive parameters are calibrated from a series of stroke‐controlled laboratory experiments that include the direct‐tension test and triaxial compression tests at three different levels of confinement. The predictive capabilities of the proposed model are assessed with a broad range of experimental data. The issue of failure on the constitutive level is addressed with the aid of the instability indicator for continuous material branching and the localization indicator for the formation of weak discontinuities. The relevance of these two failure diagnostics is evaluated with the experimental data of the wedge experiment on cylindrical concrete specimens when the stress path approaches the failure surface within the cone of instability.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P., and Oh, B. H. (1983). “Crack band theory for fracture of concrete.” Rilem‐Mat. et Const., 16(93), 155–177.
2.
Bažant, Z. P., and Prat, P. C. (1988). “Microplane model for brittle‐plastic material: I. Theory.” J. Engrg. Mech., ASCE, 114(10), 1672–1688.
3.
Burzynski, W. (1929). “Über die Anstrengungshypothesen.” Schweizerische Bauzeitung, Zürich, Switzerland, 94(21), 259–262 (in German).
4.
Chen, E. S., and Buyukozturk, O. (1985). “Constitutive model for concrete in cyclic compression.” J. Engrg. Mech., ASCE, 111(6), 797–814.
5.
Chen, W.‐F., and Han, D. J. (1988). Plasticity for structural engineers. Springer‐Verlag, New York, N.Y.
6.
de Borst, R. (1991). “Continuum models for discontinuous media.” Proc., RILEM/ESIS Conf. Fracture Processes in Concrete, Rock and Ceramics, J. van Mier, J. Rots and A. Bakker, eds., E&FN Spon, London, England, 2, 601–618.
7.
Drucker, D. (1959). “A definition of stable inelastic materials.” J. Appl. Mech., 26, 101–106.
8.
Etse, G. (1992). “Theoretische und numerische Untersuchung zum diffusen und lokalisierten Versagen in Beton,” PhD thesis, University of Karlsruhe, Karlsruhe, Germany.
9.
Gerstle, K. H. et al. (1980). “Behavior of concrete under multiaxial stress states.” J. Engrg. Mech., ASCE, 106(6), 1383–1403.
10.
Gopalaratnam, V., and Shah, S. (1984). “Softening response of concrete in direct tension.” Tech. Inst. Rep., Dept. of Civ. Engrg., Northwestern Univ., Evanston, Ill.
11.
Hegemier G., and Read, H. (1985). “On deformation and failure of brittle solids, some outstanding issues.” Mech. of Mat., 4, 215–259.
12.
Hill, R. (1958). “A general theory of uniqueness and stability in elastic‐plastic solids.” J. of Mech. and Physics of Solids, 6, 236–249.
13.
Hill, R. (1962). “Acceleration waves in solids.” J. of Mech. and Physics of Solids, 10, 1–16.
14.
Hoek, E., and Brown, E. T. (1980). “Empirical strength criterion for rock masses.” J. Geotech. Engrg., ASCE, 106(9), 1013–1035.
15.
Hurlbut, B. (1985). “Experimental and computational investigation of strain‐softening in concrete,” MSc thesis, University of Colorado, Boulder, Colo.
16.
Klisinski, M. (1985). “Degradation and plastic deformation of concrete.” IFTR Rep. No. 38, Polish Academy of Sciences, Warsaw, Poland, 198.
17.
Lade, P. V., Nelson, R. B., and Ito, Y. M. (1988). “Instability of granular materials with nonassociated flow.” J. of Engrg. Mech., ASCE, 114(12), 2173–2191.
18.
Launay, P., and Gachon H. (1972). “Strain and ultimate strength of concrete under triaxial stress.” Am. Concrete Inst. Spec. Publ. 34, paper 13, American Concrete Institute (ACI), Detroit, Mich.
19.
Leon, A. (1935). “Über die Scherfestigkeit des Betons.” Beton und Eisen, Berlin, Germany, 34(8) (in German).
20.
Levine, H. (1982). “A two surface plastic and microcracking model for plain concrete.” ASME Symp. Vol 82‐73178, L. Schwer, ed., New York, N.Y., 27–48.
21.
Maier, G., and Hueckel, T. (1979). “Non‐associated and coupled flow rules of elastoplasticity for rock‐like materials.” Int. J. Rock Mech. Min. Sci. and Geomech. Abstr., 16, 77–92.
22.
Mills, L., and Zimmermann, R. (1970). “Compressive strength of plain concrete under multiaxial loading conditions.” J. Amer. Concrete Inst., 67(10), 802–807.
23.
Mirsky, L. (1983). An introduction to linear algebra. Dover Publications, Inc., New York, N.Y.
24.
Ortiz, M. (1984). “A constitutive theory for the inelastic behavior of concrete.” Mech. of Mat., 4, 67–93.
25.
Ortiz, M., and Popov, E. (1985). “Accuracy and stability of integration algorithms for elasto‐plastic constitutive relations.” Int. J. Numer. Meth. Engrg., 21, 1561–1576.
26.
Pramono, E., and Willam, K. (1989). “Fracture energy‐based plasticity formulation of plain concrete.” J. Engrg. Mech., ASCE, 115(6), 1183–1203.
27.
Reinhardt, H. W. (1984). “Fracture mechanics of an elastic softening material like concrete.” Heron, Delft, The Netherlands, 29(2), 42.
28.
Rots, J. G., and Blaauwendraad, J. (1989). “Crack models for concrete: discrete and smeared? fixed multi‐directional or rotating?” Heron, Delft, The Netherlands, 34,1.
29.
Rudnicki, J., and Rice, J. (1975). “Conditions for the localization of deformation in pressure‐sensitive dilatant materials.”J. of Mech. and Physics of Solids, 23, 371–394.
30.
Sandler, I., and Wright, J. (1984). “Strain‐softening.” Theoretical foundation for large‐scale computations for nonlinear material behavior. S. Nemat‐Nasser, R. J. Asam, and G. A. Hegemier, eds. Martinus Nijhoff Publ., Amsterdam, The Netherlands, chapter XI, 285–296.
31.
Schickert, G., and Winkler, H. (1977). “Versuchsergebnisse zur Festigkeit und Verformung von Beton bei mehraxialer Druckbeanspruchung.” Bundesanstalt für Materialprüfung. Deutscher Ausschuβ für Stahlbeton, 277, Berlin, Germany (in German).
32.
Schleicher, F. (1925). “Die Energiegrenze der Elastizität (Plastizitätsbedingung).” Z. Ang. Math. Mech., Berlin, Germany, 5, 478–492 (in German).
33.
Simo, J. C., and Ju, J. W. (1977). “Strain‐ and stress‐based continuum damage models‐ I. formulation.” Int. J. Solids Struct. 23(7), 821–840.
34.
Smith, S. (1987). “On fundamental aspects of concrete behavior,” MSc thesis, University of Colorado, Boulder, Colo.
35.
Smith, S., Willam, K., Gerstle, K., and Sture, S. (1989). “Concrete over the top or: is there life after peak?” Am. Concrete Inst., Mat. J., 86(5), 491–497.
36.
Stankowski, T., and Gerstle, K. H. (1985). “Simple formulation of concrete behavior under multiaxial load histories.” Am. Concrete Inst., 82(2), 213–221.
37.
Thomas, T. (1961). Plastic flow and fracture in solids. Academic Press, New York, N.Y.
38.
Valanis, K., and Read, H. (1984). “An endochronic plasticity theory for concrete.” S‐Cube Topical Rep., La Jolla, Calif., 93.
39.
van Mier, J. (1984). “Strain‐softening of concrete under multiaxial loading conditions,” PhD thesis, Eindhoven University of Technology, Eindhoven, The Netherlands.
40.
Weihe, S. (1989). “Implicit integration schemes for multi‐surface yield criteria subjected to hardening/softening,” MSc thesis University of Colorado, Boulder, Colo.
41.
Willam, K., and Warnke, E. (1975). “Constitutive models for the triaxial behavior of concrete.” Proc., Int. Assoc. Bridge Struct. Engrg., Report 19, Zurich, Switzerland, 1–30.
42.
Willam, K., Hurlbut, B., and Sture, S. (1986). “Experimental and constitutive aspects of concrete failure.” Proc., US‐Japan Seminar on Finite Element Analysis of Reinforced Concrete Structures, ASCE‐Spec. Publ. ASCE, New York, N.Y., 226–254.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jun 15, 1993
Published online: Sep 1, 1994
Published in print: Sep 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.