Elastoplastic Deflections for Prismatic and Nonprismatic Beams
Publication: Journal of Engineering Mechanics
Volume 119, Issue 6
Abstract
Analytical solutions are presented for deflections beyond the elastic limit for prismatic and nonprismatic beams (beams with linearly varying depth) restrained and loaded in any way. The analytical solutions provide by differentiation the rotation, curvature, moment, and the shearing force. Simply supported and built‐in beams with uniform cross section and with linear variations in depth symmetrically with respect to midspan, loaded at midspan, are analyzed; and the results are given in a dimensionless form. The displacement occurring just prior to the collapse mechanism is 2.243 of that occurring at the limit elastic behavior for simple and built‐in uniform beams. For ratios between the minimum and the maximum depths of the beam less than 0.41, the collapse mechanism occurs with plastic hinges located at midspan and along the beam. Five elastoplastic behaviors for built‐in beams with linearly varying depth are established, and the limit ratios between the maximum and the minimum depths of the beam separating these behaviors are determined.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bhat, S. U., and Xirouchakis, P. C. (1986). “Plastic analysis of floating beams.” J. Engrg. Mech., ASCE, 112(2), 198–214.
2.
Chang, C. (1992). “Consistent stiffness iteration method for elastic‐plastic analysis.” Computers and Struct., 43(2), 255–263.
3.
Fertis, D. G., and Keene, M. E. (1990). “Elastic and inelastic analysis of nonprismatic members.” J. Struct. Engrg., ASCE, 116(2), 475–489.
4.
Fertis, D. G., and Taneya, R. (1991). “Equivalent system for inelastic analysis of prismatic and nonprismatic members.” J. Struct. Engrg., ASCE, 117(2), 473–488.
5.
Gürkök, A., and Hopkins, H. G. (1981). “Plastic beams at finite deflection under transverse load with variable end‐constraints.” J. Mech. Phys. Solids, 29(5/6), 447–476.
6.
Hodge, P. G. (1957). “Interaction curves for shear and bending of plastic beams.” J. Appl. Mech., 24(3), 453–456.
7.
Romano, F., and Zingone, G. (1992). “Deflections of beams with varying rectangular cross section.” J. Engrg. Mech., ASCE, 118(10), 2128–2134.
8.
Schubak, R. B., Olson, M. D., and Anderson, D. L. (1987). “Simplified rigid‐plastic beam analysis.” J. Appl. Mech., 54(3), 720–722.
9.
Timoshenko, S. (1941). Strength of material. Part II: Advanced theory and problems. D. Van Nostrand Co., Inc., New York, N.Y.
10.
Tin‐Loi, F. (1991). “Post‐yield analysis of rigid‐plastic beams with variable restraints.” J. Engrg. Mech., ASCE, 117(1), 54–69.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jul 15, 1992
Published online: Jun 1, 1993
Published in print: Jun 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.