Development of Design Spectra for Actively Controlled Wall‐Frame Buildings
Publication: Journal of Engineering Mechanics
Volume 118, Issue 6
Abstract
Preliminary design of a structure controlled by active bracing or mass dampers to withstand seismic motion or high winds requires rapid means of analysis and estimates. A response spectrum technique applied to simplified models of complex structures can provide such means. The spectra required for preliminary evaluation of a controlled structure include, besides the usual response parameters (displacement, acceleration, base shear), the control resource parameters, such as the size and capacity of hydraulic actuators; power requirements; and energy consumption. This paper presents an approach to develop design spectra based on the analogy of behavior of wall frame structures with the behavior of shear‐flexural cantilever beams treated by the continuum approach. This approach is verified numerically and experimentally using simplified parameters representing the structures. The same approach is further used to develop typical response and resource spectra using simulated ground motions according to a current seismic code. Several recommendations on efficiency of control of wall‐frame structures are presented using information from the design spectra developed herein.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bullen, K. E., and Bolt, B. A. (1985). An introduction to the theory of seismology. 4 Ed., Cambridge Univ. Press, Cambridge, U.K.
2.
Chung, L. L., Lin, R. C., Soong, T. T., and Reinhorn, A. M. (1988a). “Experimental study of active control of MDOF structures under seismic excitations.” Report NCEER‐88‐0025, National Center for Earthquake Engineering Research at the State Univ. of New York, Buffalo, N.Y.
3.
Chung, L. L., Lin, R. C., Soong, T. T., and Reinhorn, A. M. (1989). “Experimental study of active control for MDOF seismic structures.” J. Engrg. Mech. Div., ASCE, 115(8), 1609–1627.
4.
Chung, L. L., Reinhorn, A. M., and Soong, T. T. (1988b). “Experiments on active control of seismic structures.” J. Engrg. Mech., ASCE, 114(2), 241–256.
5.
Gasparini, D. A., and Vanmarcke, E. H. (1976). “Simulated earthquake motions compatible with prescribed response spectra—Evaluation of seismic safety of buildings.” Report No. 2, Massachusetts Inst. of Tech., Cambridge, Mass.
6.
Goyal, A., and Chopra, A. K. (1989). “Earthquake response spectrum analysis of intake‐outlet towers.” J. Engrg. Mech., ASCE, 115(7), 1413–1433.
7.
Heidebrecht, A. C., and Stafford Smith, B. (1973). “Approximate analysis of tall wall‐frame structures.” J. Struct. Engrg. Div., ASCE, 99(2), 199–221.
8.
Lopez‐Almansa, F., and Rodellar, J. (1989). “Control systems of building structures by active cables.” J. Struct. Engrg., ASCE, 115(11), 2897–2913.
9.
Muto, K. (1974). Aseismic design analysis of buildings. Maruzen Co. Ltd., Tokyo, Japan.
10.
Reinhorn, A. M., Rutenberg, A., and Gluck, J. (1977). “Dynamic torsional coupling in asymmetric building structures.” Build. Envir., 12(4), 251–261.
11.
Reinhorn, A. M., and Soong, T. T. (1990). “Full scale implementation of active bracing for seismic control of structures.” U.S. National Workshop on Structural Control Research, G. W. Housner and S. F. Masri, eds., Univ. of Southern California, Los Angeles, Calif., 201–209.
12.
Reinhorn, A. M., Soong, T. T., Lin, R. C., Wang, Y. P., Fukao, Y., Abe, H., and Nakai, H. (1989). “1:4 scale model studies of active tendon systems and active mass dampers for aseismic protection.” Report NCEER‐89‐0026, Nat. Ctr. for Earthquake Engrg. Res., Buffalo, N.Y.
13.
“Response of buildings to lateral forces.” J. Am. Concr. Inst., ACI Committee 442, M. Fintel, chmn., 68(2), 81–106.
14.
Soong, T. T. (1990). Active structural control: Theory and practice. Longman, London, U.K. and John Wiley & Sons, Inc., New York, N.Y.
15.
Soong, T. T., Reinhorn, A. M., Wang, Y. P., and Lin, R. C. (1991). “Full‐scale implementation of active structural control under seismic loads—I. System design and simulation results.” J. Struct. Engrg., ASCE, 117(11), 3516–3536.
16.
Su, L., and Ahmadi, G. (1988). “Earthquake response of linear continuous structures by the method of evolutionary spectra.” Engrg. Struct., 10(1), 47–56.
17.
Tentative provisions for the development of seismic regulations for buildings, ATC‐3‐06 amended. (1984). Applied Technology Council, Palo Alto, Calif.
18.
Wang, Y. P. (1991). “Experimental analysis and design of active tendon control for seismic structures,” PhD dissertation, State Univ. of New York at Buffalo, Buffalo, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Jun 1, 1992
Published in print: Jun 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.