Seismic Performance of Fixed‐Base and Base‐Isolated Steel Frames
Publication: Journal of Engineering Mechanics
Volume 118, Issue 5
Abstract
The seismic performance of fixed‐base and base‐isolated concentrically braced and special moment‐resisting steel frames are determined. The fixed‐base frames are designed in accordance with the 1990 Structural Engineers Association of California (SEAOC) Recommended Lateral Force Requirements and Commentary, while the base‐isolated frames are designed to 100%, 50%, and 25% of the SEAOC‐recommended lateral force levels. Nonlinear time‐history analyses, for 54 ground motion records, are then conducted. The number of yielded or collapsed frames, number of yielded elements, total and relative roof displacement, and isolation‐bearing displacement are statistically evaluated. Comparable or better performance is achieved for the base‐isolated braced frame designed to 50% of the SEAOC‐recommended lateral force. Comparable performance is achieved for the base‐isolated moment frame at various design force levels, depending on the performance criteria.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderson, T. L. (1989). “Seismic Isolation for the Los Angeles County Fire Department.” Seismic engineering: Research and practice, C. A. Kircher and A. K. Chopra, eds., ASCE, New York, N.Y., 615–624.
2.
Guide specifications for seismic isolation design. (1991). American Association of State Highway and Transp. Officials (AASHTO), Washington, D.C.
3.
Jain, A. K., and Goel, S. C. (1978). “Hysteresis models for steel members subjected to cyclic buckling or cyclic end moments and buckling.” Report No. UMEE 78R6, Univ. of Michigan, Ann Arbor, Mich.
4.
Kanaan, A. E., and Powell, G. G. (1973). “DRAIN‐2D User Guide.” EERC Report 73‐6, 73–22, Univ. of California, Berkeley, Calif.
5.
Kelly, T. E., Mayes, R. L., and Weissberg, S. (1989). “Earthquake damage estimates of conventional and isolated structures.” Seismic engineering: Research and practice, C. A. Kircher and A. K. Chopra, eds., ASCE, New York, N.Y., 119–128.
6.
Kircher, C. A., and Lashkari, B. (1989). Statistical evaluation of nonlinear response of seismic isolator systems. Jack Benjamin and Associates, Inc., San Francisco, Calif.
7.
Kulak, R. F., and Wang, C. Y. (1989). “Design and analysis of seismically isolated structures.” Proc., First Int. Seminar on Seismic Base Isolation for Nuclear Power Facilities, Argonne National Laboratory.
8.
Manual of steel construction, allowable stress design. (1989). Ninth Ed., American Inst. of Steel Constr. (AISC), Chicago, Ill.
9.
Mayes, R. L., Jones, L. R., and Buckle, I. G. (1990). “Impediments to the implementation of seismic isolation.” Earthquake Spectra, 6(2), 283–296.
10.
MSC/Nastran user's manual, Version 66A. The MacNeal‐Schwendler Corp., Los Angeles, Calif.
11.
Nagarajaiah, S., Reinhorn, A. M., and Constantinou, M. C. (1989). “Nonlinear dynamic response of three‐dimensional base isolated structures.” NCEER 89‐0019, State Univ. of New York, Buffalo, N.Y.
12.
PATRAN Plus User Manual, Release 2.4, PDA Engrg., Costa Mesa, Calif.
13.
Powell, G. H. (1990). DRAIN‐2DX version 0.01 user guide. Univ. of California, Berkeley, Calif.
14.
Recommended lateral force requirements and commentary. (1990). Struct. Engrs. Association of California (SEAOC), Sacramento, Calif.
15.
Seed, H. B., Ugas, C., and Lysmer, J. (1976). “Site‐dependent spectra for earthquake‐resistant design.” Bull. Seismological Society of America, 66(1), 221–243.
16.
“Tentative provisions for the development of seismic regulations for buildings.” (1978). ATC‐3‐06, Applied Tech. Council, Redwood City, Calif.
17.
Uniform building code. (1991). Int. Conf. of Bldg. Officials (ICBO), Whittier, Calif.
18.
Way, D., and Jeng, V. (1989). “N‐PAD: A three‐dimensional program for the analysis of base‐isolated structures.” Seismic engineering: Research and practice. C. A. Kircher, and A. K. Chopra, eds., ASCE, New York, N.Y., 169–178.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.