postbuckling of orthotropic rectangular Plates in Biaxial Compression
Publication: Journal of Engineering Mechanics
Volume 117, Issue 5
Abstract
The buckling and postbuckling behavior of orthotopic composite rectangular plates with simply supported edges in biaxial compression are investigated using a deflection‐type perturbation technique. Using the technique, the nonlinear generalized von Kármán equations of orthotropic plates are solved. The effects of geometrical imperfections are considered in the research. It is of interest that the behaviors of orthotropic and isotropic plates are markedly different from each other during buckling and postbuckling.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Becker, H. (1977). “Instability strength of polyaxially loaded plates and relation to design.” Steel plated structures, D. J. Dowling et al., eds., 559–580.
2.
Becker, H., et al. (1970). “Compressive strength of ship hull girders, part 1: Unstiffened plates,” Report 217.
3.
Becker, H., et al. (1977). “Compressive strength of ship hull girders, part 3: Theory and additional experiments,” Report 267.
4.
Dier, A. F., and Dowling, P. J. (1980). “Plates under combined lateral loading and biaxial compression.” CESLIC Report SP8.
5.
Dier, A. F., and Dowling, P. J. (1984). “The strength of plates subjected to biaxial forces.” Behavior of thin‐walled structures, J. Rhodes and J. Spence, eds., 329–353.
6.
Halach, H. W. (1986). “Post‐buckling stability of orthotropic, linear elastic rectangular plates under biaxial loads.” Int. J. Mech. Sci., 28, 739–756.
7.
Harris, G. Z. (1975). “The buckling and postbuckling behavior of composite plates under biaxial loading.” Int. J. Mech. Sci., 17, 187–202.
8.
Harris, G. Z. (1976). “Buckling and postbuckling of orthotropic plates.” AIAA J., 14, 1505–1506.
9.
Libove, C. (1983). “Buckle pattern of biaxial compressed simply supported orthotropic rectangular plates.” J. Composite Mat., 17, 45–48.
10.
Mckenzie, K. I. (1964). “The buckling of a rectangular plate under combined biaxial compression, bending and shear.” Aero. Quart., 15, 237–246.
11.
Narayanan, R., et al. (1983). “Compressive strength of biaxial loaded plates.” Plated structures stability and strength, R. Narayanan, ed., 195–219.
12.
Prabhakara, M. K., and Chia, C. Y. (1973). “Postbuckling behavior of rectangular orthotropic plates.” J. Mech. Eng. Sci., 15, 25–33.
13.
Shen, S. H., and Zhang, J. W. (1988). “Perturbation analysis for the postbuckling of simply supported rectangular plates under uniaxial compression.” J. Appl. Mathematics and Mech., 9, 793–804.
14.
Shen, S. H., and Zhang, J. W. (1989). “Postbuckling behavior of simply supported rectangular plates under biaxial compression.” Chinese J. Appl. Mech., 6, 61–67.
15.
Timoshenko, S. (1936). Theory of elastic stability, McGraw‐Hill Book Co., Inc., New York, N.Y.
16.
Valsgard, S. (1979). “Ultimate capacity of plates in biaxial in‐plane compression,” Dnv Report 79–0104.
17.
Valsgard, S. (1980). “Numerical design prediction of the capacity of plates in inplane compression.” Computers and Struct., 12, 729–739.
18.
Wittrick, W. H. (1952). “Correlation between some stability problems for orthotropic and isotropic plates under biaxial and uniaxial direct stress,” Aero. Quart., 4, 83–92.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.