Failure Model of Polymer Mortar
Publication: Journal of Engineering Mechanics
Volume 117, Issue 5
Abstract
To enable prediction of the strength of polymer mortars, a failure model is presented. Based on the so‐called Arrhenius kinetic rate equation, a compound dual failure criteria is developed. The proposed model considers the visco‐elastic nature of the class of materials manifested by the dependence of their strength on loading rates and temperature. The model also accounts for the class's dual failure modes as a rock/soil/concrete‐type material, i.e., failure in compressive shear and/or tensile cleavage. Experiments were performed with mortar specimens using several different epoxy binders. Benchmark values of parameters of the proposed failure model are presented. Within the range of temperatures and loading rates used in the experiments, the model appears to comply well with experimental data. It is anticipated that a similar failure model can be used for mortars made with other types of polymer binders and for polymer concrete in general.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Biswas, M., Ghattas, O., and Vladmirou, H. (1985). “Fatigue and freeze‐thaw resistance of epoxy mortar.” Transp. Res. Record 1041, 33–38.
2.
Biswas, M. (1986). “Precast bridge deck design systems.” J. Prestressed Concrete Inst., 31(2), 40–94.
3.
Chen, W. F. (1982). Plasticity in reinforced concrete. McGraw‐Hill Book Co., Inc., New York, N.Y.
4.
Cowan, H. J. (1953). “The strength of plain, reinforced and pressed concrete under the action of combined stresses, with particular reference to the combined bending and torsion of rectangular sections.” Magazine of Concrete Res., 5(14), 75–86.
5.
Eyring, H. (1936). “Viscosity, plasticity, and diffusion as examples of absolute reaction rates.” J. Chemical Physics, 4(4), 283–291.
6.
Fowler, D. (1987). “Current status of polymers in concrete.” The production, performance, and potential of polymers in concrete: Proc., 5th Int. Congress of Polymers in Concrete, Brighton, England, 3–7.
7.
Kelsey, R. G. (1988). “Failure theory for epoxy mortar materials,” thesis submitted to Duke University, at Durham, N.C, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
8.
Kruger, D. (1987). “Furfuryl alcohol polymer concretes: Research and developments in South African Phase 2.” The production, performance, and potential of polymers in concrete: Proc., 5th Int. Congress of Polymers in Concrete, Brighton, England, 37–40.
9.
Lindholm, U. S., Yeakley, L. M., and Nagy, A. (1974). “The dynamic strength and fracture properties of Dresser basalt.” Int. J. of Rock Mech. and Mining Sci. and Geomech. Abstracts, 11(5), 181–191.
10.
Mehta, P. K. (1986). Concrete structure, properties, and materials. Prentice‐Hall, Englewood Cliffs, N.J., 67–73.
11.
Mendenhall, W. (1968). Introduction to linear models and the design and analysis of experiments. Duxbury Press, Wads worth Publishing Co., Belmont, Calif., 174–220.
12.
Nutt, W. O. (1987). “State of the art in Europe.” The production, performance, and potential of polymers in concrete: Proc., 5th Int. Congress of Polymers in Concrete, Brighton, England, 9–11.
13.
Okada, K., Koyanagi, W., and Yonzema, T. (1975). “Thermodependent properties of polyester resin concrete.” Proc., 1st Int. Congress on Polymers in Concrete, Lancaster, England, 210–215.
14.
Okada, K., and Ohama, Y. (1987). “Recent research and applications of concrete polymer composites in Japan.” The production, performance, and potential of polymers in concrete: Proc., 5th Int. Congress of Polymers in Concrete, Brighton, England, 27–31.
15.
Reinhardt, H. (1986). “Strain rate effects on the tensile strength of concrete as predicted by thermodynamic and fracture mechanics models.” Cement‐Based Composites: Strain Rate Effects on Fracture, Symposia Proc. 64, S. Mindess and S. Shah, eds., Materials Research Society, Pittsburgh, Pa., 1–13.
16.
Saemann, J. C., and Washa, G. W. (1957). “Variation of mortar and concrete properties with temperature.” Proc. ACI, 54, 385–395.
17.
Tobolsky, A., and Eyring, H. (1943). “Mechanical properties of polymeric materials.” J. Chemical Physics, 11(3), 125–134.
18.
Wu, H.‐C. (1974). “Dual failure criterion for plain concrete.” J. Engrg. Mech. Div., ASCE, 100(6), 1167–1181.
19.
Yuanli, W. (1987). “Emergence and status of polyester concrete industry in China.” The production, performance, and potential of polymers in concrete: Proc., 5th Int. Congress of Polymers in Concrete, Brighton, England, 33–35.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.