Micromechanical model to predict sand Densification by Cyclic Straining
Publication: Journal of Engineering Mechanics
Volume 116, Issue 2
Abstract
It has been observed that the application of cyclic shear loading to a dry sand and other cohesionless soils results in a progressive volume reduction and a relative density increase. Although this densification is larger and takes place faster in loose sands, it occurs in both loose and dense soils, and is caused by the tendency of any sand to contract under a small shear strain. A micromechanical statistical model was developed by the writers to interpret and compute the compaction of such a dry granular soil subjected to a strain‐controlled cyclic simple‐shear test. The method postulates that an important role is played in the compaction phenomenon by the spatial statistical distribution of porosity within the soil specimen. Numerical simulations of densification are presented using the proposed model, which are in excellent agreement with observed sand compaction in actual cyclic simple‐shear tests. These simulations provide new insight into the densification process, and especially on the significance of the evolution of the porosity distribution with the number of strain cycles.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P., and Krizek, R. J. (1976). “Endochronic constitutive law for liquefaction of sand.” J. Engrg. Mech. Div., 102(2), 225–238.
2.
Benjamin, J. R., and Cornell, C. A. (1970). Probability, statistics and decision for civil engineers, McGraw‐Hill Book Company, Inc., New York, N.Y.
3.
Christensen, R. M. (1979). Mechanics of composite materials. John Wiley and Sons, New York, N.Y.
4.
Dobry, R., Yokel, F. Y., and Ladd, R. S. (1981). “Liquefaction potential of overconsolidated sands in areas with moderate seismicity.” Proc., Conf. on Earthquake and Earthquake Engrg. in the Eastern United States, Knoxville, Tenn.
5.
Dobry, R., et al. (1982). “Prediction of pore water pressure buildup and liquefaction of sands during earthquakes by the cyclic strain method.” Report No. 138, National Bureau of Standards, Washington, D.C.
6.
Drnevich, V. P., and Richart, F. E., Jr. (1970). “Dynamic prestraining of dry sand.” J. of Soil Mech. and Found. Engrg. Div., ASCE, 96(2), 453–469.
7.
Finn, L. W. D., and Bhatia, S. (1980). “Endochronic theory of sand liquefaction.” Proc., 7th World Conf. on Earthquake Engrg., Istanbul, Turkey, 3, 149–155.
8.
Hardin, B. O., and Richart, F. E., Jr. (1963). “Elastic wave velocities in granular soils.” J. of Soil Mech. and Found. Engrg. Div., ASCE, 89(2), 33–65.
9.
Lee, K. L., and Albaisa, A. (1974). “Earthquake induced settlements in saturated sands.” J. of Geotech. Engrg. Div., ASCE, 103(6), 535–547.
10.
Martin, G. R., Finn, L. W. D., and Seed, H. B. (1975). “Fundamentals of liquefaction under cyclic loading.” J. of Geotech. Engrg. Div., 101(5), 423–438.
11.
Nogami, T., and Imai, G. (1969). “Influence of grain to grain friction on shear phenomena of granular materials.” Soils and Foundations, 9(3), 1–15.
12.
Oda, M. (1976). “Fabric and their effects on the deformation behavior of sand.” Report of Department of Foundation Engineering, Faculty of Engineering, Saitama University, Japan.
13.
Petrakis, E. (1983). “A statistical model to predict compaction of dry sand during cyclic simple shear loading: Model and applications,” thesis presented to Rensselaer Polytechnic Institute, at Troy, N.Y., in partial fulfillment of the requirements for the degree of Master of Science.
14.
Petrakis, E., and Dobry, R. (1986). “A self consistent estimate of the elastic constants of a random array of equal spheres with application to granular soil under isotropic conditions.” Report CE‐86‐04, Dept. of Civ. Engrg., Rensselaer Polytechnic Institute, Troy, N.Y.
15.
Pyke R. M. (1973). “Settlement and liquefaction of sands under multi‐directional loading,” thesis presented to the University of California, at Berkeley, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
16.
Pyke, R., Chan, C. K., and Seed, H. B. (1974). “Settlement and liquefaction of sands under multi‐directional shaking.” Report No. EERC 74‐2, College of Engrg., Univ. of California, Berkeley, Calif.
17.
Roscoe, K. H., Schofield, A. N., and Wroth, C. P. (1958). “On the yielding of Soils.” Geotechnique, 8, 29–53.
18.
Seed, H. B. (1979). “Soil liquefaction and cyclic mobility evaluation for level ground during earthquakes.” J. Geotech. Engrg. Div., ASCE, 105(2), 201–255.
19.
Seed, H. B., Mori, K., and Chan, C. K. (1977). “Influence of seismic history on liquefaction of sands.” J. Geotech. Engrg. Div., ASCE, 103(4), 245–270.
20.
Seed, H. B., and Silver, M. L. (1972). “Settlement of dry sands during earthquakes.” J. Soil Mech. and Found. Engrg. Div., 98(4), 381–397.
21.
Shahinpoor, M. (1981). “Statistical mechanical considerations on storing bulk solids.” Bulk Solids Handling, 2(2), 31–36.
22.
Shahinpoor, M., and Shahrpass, A. (1982). “Frequency distribution of voids in monolayers of randomly packed equal spheres.” Bulk Solids Handling, 2(4), 825–838.
23.
Silver, M. L., and Seed, H. B. (1971). “Volume changes in sands during cyclic loading.” J. Soil Mech. and Found. Engrg. Div., ASCE, 97(9), 1171–1182.
24.
Smith, W. D., Foote, P. D., and Busang, P. F. (1929). “Packing of homogeneous spheres.” Physical Review, 34, 1271–1274.
25.
Youd, T. L. (1971). “Maximum density of sand by repeated straining in simple shear,” Highway Res. Record, (374), 1–6.
26.
Youd, T. L. (1972). “Compaction of sands by repeated shear straining.” J. Soil Mech. and Found. Engrg. Div., ASCE, 98(7), 709–724.
27.
Youd, T. L., and Craven, T. N. (1972). “Discussion on seed and silver.” J. Soil Mech. and Found. Div., 98(12), 1423–1425.
28.
Youd, T. L., and Craven, T. N. (1975). “Lateral stress in sands during cyclic loading.” J. Geotech. Engrg. Div., 101(2), 217–221.
29.
Youd, T. L. (1977). “Packing changes and liquefaction susceptibility.” J. Geotech. Engrg. Div., ASCE, 103(8), 918–922.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 116 • Issue 2 • February 1990
Pages: 288 - 308
Copyright
Copyright © 1990 ASCE.
History
Published online: Feb 1, 1990
Published in print: Feb 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.