Smeared Crack Analysis Using Generalized Fictitious Crack Model
Publication: Journal of Engineering Mechanics
Volume 116, Issue 1
Abstract
The fictitious crack model is extended so that it includes the effect of crack shearing. By the introduction of the so‐called equivalent length, it is possible to establish a smeared version of the fictitious crack model. The equivalent length is a purely geometrical quantity that depends entirely on the size and form of the element and on the crack direction. A realistic modeling of crack shearing is obtained, and the smeared constitutive relations are objective with respect to both loading normal to the crack plane and loading tangential to the crack plane. The existence of multiple cracks is considered, and a consistent theory for unloading and possible closure of the cracks is presented. FE calculations of a concrete specimen using four different element types demonstrate the objectivity of the theory even when distorted meshes are used.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P. (1986). “Mechanics of distributed cracking.” Appl. Mech. Rev., 39(5), 675–705.
2.
Bažant, Z. P., and Cedolin, L. (1979). “Blunt crack band propagation in finite element analysis.” J. Engrg. Mech. Div., ASCE, 105(2), 297–315.
3.
Bažant, Z. P., and Oh, B. H. (1983). “Crack band theory for fracture of concrete.” Mater. Struct., RILEM, 16(93), 155–177.
4.
Dahlblom, O. (1987). “Constitutive modelling and finite element analysis of concrete structures with regard to environmental influence.” Report TVSM‐1004, Lund Institute of Technology, Division of Structural Mechanics, Lund, Sweden.
5.
Divakar, M. P., Fafitis, A., and Shah, S. P. (1987). “Constitutive model for shear transfer in cracked concrete.” J. Struct. Engrg., ASCE, 113(5), 1046–1062.
6.
Hand, F. R., Pecknold, D. A., and Schnobrich, W. C. (1973). “Nonlinear layered analysis of RC plates and shells.” J. Struct. Div., ASCE, 99(7), 1491–1505.
7.
Hillerborg, A., Modéer, M., and Petersson, P.‐E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6(6), 773–782.
8.
Hillerborg, A. (1985). “Numerical methods to simulate softening and fracture of concrete.” Fracture mechanics of concrete: Structural application and numerical calculation, G. C. Sih and A. DiTommaso, eds., Martinus Nijhoff Publ., Dordrecht, Netherlands, 141–170.
9.
Ingreffea, A. R., and Saouma, V. (1985). “Numerical modelling of discrete crack propagation in reinforced and plain concrete.” Fracture mechanics of concrete: Structural application and numerical calculation, G. C. Sih and A. DiTommaso, eds., Martinus Nijhoff Publ., Dordrecht, Netherlands, 171–225.
10.
Leibengood, L. D., Darwin, D., and Dodds, R. H. (1986). “Parameters affecting FE analysis of concrete structures.” J. Struct. Engrg., ASCE, 112(2), 326–341.
11.
Ngo, D., and Scordelis, A. C. (1967). “Finite element analysis of reinforced concrete beams.” J. Amer. Concr. Inst., 64(3), 152–163.
12.
Nilsson, L., and Oldenburg, M. (1982). “Nonlinear wave propagation in plastic fracturing materials—A constitutive modelling and finite element analysis.” IUTAM Symp.: Nonlinear Deformation Waves, Tallin 1982, Springer, Berlin, Germany, 209–217.
13.
Oldenburg, M. (1985). “Finite element analysis of tensile fracturing structures.” Report 1985:010L, Division of Computer Aided Analysis and Design, Luleå University, Luleå, Sweden.
14.
Ottosen, N. S., and Dahlblom, O. (1986). “Smeared crack analysis using a nonlinear fracture model for concrete.” Numerical methods for non‐linear problems, 3, C. Taylor, et al., eds., Pineridge Press, Swansea, U.K., 363–376.
15.
Ottosen, N. S. (1986). “Thermodynamical consequences of strain softening in tension.” J. Engrg. Mech., ASCE, 112(11), 1152–1164.
16.
Paulay, T., and Loeber, P. S. (1974). “Shear transfer by aggregate interlock.” Shear in reinforced concrete, Special Publ. SP‐42, 1, Amer. Concr. Inst. (ACI), Detroit, Mich., 1–15.
17.
Petersson, P.‐E. (1981). “Crack growth and development of fracture zones in plain concrete and similar materials.” Report TVBM‐1006, Division of Building Materials, Lund Institute of Technology, Lund, Sweden.
18.
Rashid, Y. R. (1968). “Ultimate strength analysis of reinforced concrete pressure vessels.” Nucl. Engrg. Des., 7(4), 334–344.
19.
Reinhardt, H. W. (1984). “Fracture mechanics of an elastic softening material like concrete.” Heron, 29(2), 1–42.
20.
Rots, J. G., et al. (1985). “Smeared crack approach and fracture localization in concrete.” Heron, 30(1), 1–48.
21.
Willam, K. J. (1984). “Experimental and computational aspects of concrete fracture.” Computer‐aided analysis and design of concrete structures, Pineridge Press, Swansea, U.K., 33–70.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jan 1, 1990
Published in print: Jan 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.